Countertops not only make your kitchen look complete, but they also provide a useful surface to prep and cook food on. Despite being rather durable, overtime countertops can become stained, scuffed up, dingy, and just plain outdated. Unfortunately, replacing a countertop can be a bit expensive. Because of this, people were left looking for a more cost-effective way to improve the appearance of the countertop. This is where peel and stick tiles come in handy.
Peel and stick tiles can be placed over countertops, and it is actually a budget-friendly method to change the look of a room without the high cost associated with purchasing and installing a new countertop. Additionally, the entire process is fairly easy with minimal tools.
With that said, however, you must first make sure the countertop is in good condition. If the countertop is crumbling and falling apart, the peel and stick tiles will merely be a temporary Band-Aid. Additionally, any holes or divots in the countertop will need fixed before you can cover the countertop with peel and stick tiles. Keep this in mind when deciding whether or not peel and stick tiles are the way to go for your needs.
Should You Put Peel And Stick Tile Over Countertop?
Now that you know that you can put peel and stick tiles over countertops, let’s take a look at whether or not you should do it.
You should consider putting peel and stick tile over countertops if you want to change the look of the countertop while on a budget. Remember, however, that most peel and stick tiles are not made for the same type of workload as a countertop, which means they may be more inclined to chip or crack.
The only real thing to watch out for or be concerned with is how you treat the countertop after covering it with peel and stick tiles. Countertops are typically made with durable and heavy duty materials, such as granite, that can withstand a bit of abuse. Peel and stick tiles, however, usually cannot handle this type of use and can quickly become damaged.
So if you do decide to put peel and stick tile over your countertop, refrain from being too rough on the surface.
What Tools Do You Need To Put Peel And Stick Tile Over Countertop?
Even though the entire process of applying peel and stick over a countertop is relatively simple, there are a few tools needed in order to do the job properly. Thankfully, the tools needed for the task are not too expensive and you may even have some of them on hand right at this very moment.
To properly install peel and stick tile over countertops, you will need a degreaser, sponge or scrub brush, water, rags, epoxy repair putty, putty knife, sandpaper, and a heavy rolling pin. You will, of course, also need peel and stick tiles.
To make the installation process go smoother, you should gather all the required tools before beginning the task. This will ensure you have the tools needed ahead of time, which means you won’t have to stop what you are doing in the middle to run and buy a tool you need but don’t have.
What Preparations Do You Need To Put Peel And Stick Tile Over Countertop?
Before you can apply the peel and stick tiles, you will first need to properly prepare the countertop surface. This isn’t a step you should skip, since proper preparation is key to ensuring the job is done right.
To prepare the countertops, you must first remove all items off of the surface and then thoroughly clean them with a degreaser. Use water and a rag to rinse and dry the countertop after cleaning it. Look for any holes or dips in the countertop and repair them with epoxy repair putty.
Let the putty dry for at least 3 hours before using a piece of sandpaper to even the surface. This will also create a rough surface that allows the peel and stick tiles to adhere to the countertop much more effectively.
How To Put Peel And Stick Tile Over Countertop
Peel and stick tiles are a relatively inexpensive way to cover up old, dingy, and outdated countertops. And while the installation process isn’t difficult, it does take some time and preplanning to ensure you get the look you desire.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on December 8, 2022.
When installing peel and stick tiles on a countertop, you will need to prepare the surface, lightly sand the countertop, arrange and then apply the tiles to the countertop, press the tiles down firmly in place using a heavy rolling pin, and then cover the edges of the countertop.
The first step is to remove everything off the countertop and then clean the surface with a degreaser. Rinse the countertop and then dry with a rag. If there are any small holes or divets in the countertop, you will need to first fill them with an epoxy repair putty. This will help create a smooth, even surface. Once the putty has dried, use sandpaper to rough up the surface of the countertop. This will help the peel and stick tiles adhere to the surface better.
Once the surface has been prepped, decide how you will lay the tiles out on the countertop. This is especially important if the tiles have a design on them. Once you have a good idea of how you will arrange the tiles, you can start applying them to the countertop.
Peel and stick tiles have a protective backing that will need to be peeled off the tiles before they can be stuck to the countertop. Once you have the backing peeled off, lay the tile in the desired position and then press the tile firmly on the countertop. Roll a heavy rolling pin over top the tile to help secure it in place.
Related Articles
Can You Put Peel and Stick Tile Over Fireplace? (How To)
ReadyToDIY is the owner of this article. This post was published on December 8, 2022.