Skip to Content

Can You Put Plywood Over Asbestos Tile? (How To)

If you are considering changing the look of your space, an excellent way to do that would be to cover an existing floor with plywood. You can apply plywood to just about any surface with the proper materials and preparations. However, if you have asbestos tiles, you might consider removing them before installing your plywood.

Asbestos tiles can be harmful if you drill into them and release the fibers into the air. You should avoid drilling into asbestos tiles if you can. If you are considering installing plywood over your asbestos tiles, you should remove the times before you begin your project instead.

Safety should be your number one concern when completing DIY projects. Inhaling the fibers from asbestos is not safe. You should not use a power drill to drill into asbestos tiles. This will release the fibers into the air. You must remove asbestos tiles before installing plywood.

Should You Put Plywood Over Asbestos Tile? 

To properly secure plywood to a surface, you must drill into it. You should avoid applying plywood over asbestos tiles if you can. Drilling into asbestos tiles will cause the fibers of the tiles to be released into the air, and they are toxic. You need to remove the asbestos tiles as carefully as you can to avoid breaking any tiles.

Asbestos is dangerous, and breathing it in could be harmful. You should not do anything to asbestos tiles that could cause the fibers of the times to get into the air around you. You should consider removing them before you install your plywood.

If you can avoid drilling into asbestos tiles, you should. You do not want to release asbestos fibers into the air. You can install plywood after your asbestos tiles have been removed. Be careful when removing asbestos tiles. You should wear a mask.

What Tools Do You Need to Put Plywood Over Asbestos Tile?

The tools you need depend on whether you plan to remove your asbestos tile before installing your plywood. It is highly recommended that you remove asbestos tiles instead of drilling into them to install plywood.

You will need a hammer and a putty knife to remove asbestos tiles. You will also need a mask to protect yourself from potential asbestos fibers. Have a tape measure and a saw to cut your plywood to size. Once your asbestos tile is removed, you will need a power drill and the appropriate screws to secure the plywood to your surface.

You need to remove your asbestos tiles before you install your plywood. You should not drill into the tile because it will cause asbestos fibers to release into the air, which will be toxic and harmful to you. When removing the asbestos tiles you need to be careful not to break any of the tiles.

What Preparations Do You Need to Put Plywood Over Asbestos Tile?

Preparations make all the difference when it comes to completing a DIY project. You need to ensure you are preparing well to get the best, most professional-looking results from your work. You should prepare first by getting your materials ready.

You should get your materials ready before you begin your project. Once your materials are set, you can carefully remove your asbestos tile to prepare your area for applying your plywood. You should also ensure that all your furniture is cleared from the site.

You need to ensure that you are preparing well for any DIY project. Installing plywood over asbestos tiles heavily depends on how carefully you remove your asbestos tiles. You need to ensure you safely remove the tiles so that the fibers do not get released. You have to take your safety seriously when dealing with asbestos tiles.

How to Put Plywood Over Asbestos Tile

Installing plywood to any surface is a simple process. You can take on this DIY project independently if you prepare well, follow the proper steps, and have the suitable materials to get the job done right. You need to prioritize your safety and ensure that you are careful when dealing with asbestos tiles.

The first thing you should do is clear your area of all furniture to give yourself the room you need to work. Next, get a putty knife and hammer to remove the asbestos tiles carefully. Then you can measure and cut your plywood. Install the plywood using a power drill and the proper screws to secure it.

The first thing you need to do is ensure that your area is free of furniture and obstacles. You will want to ensure that you have enough space to work and that you don’t have any table around to collect potential asbestos fibers that get in the air.

Next, you should put on your mask and use a putty knife and a hammer to remove the asbestos tiles carefully. You need to be careful not to break any of the times because the fibers could be released into the air and cause you harm. Asbestos is toxic and should not be inhaled.

After removing your asbestos tiles, you should measure and cut your plywood. You can use large sheets of plywood to cover as much surface area as possible. After your plywood is measured and cut to size, you can use a power drill and the proper screws to secure your plywood.

You can install plywood over asbestos tiles, but it is not recommended. You should never drill into or cut asbestos tiles. This action could release toxic asbestos fibers into the air and cause significant harm. You should remove the asbestos tiles before you install your plywood. This will ensure you have the most success with your project while remaining safe.

ReadyToDIY is the owner of this article. This post was published on 2022-11-21.

DIY projects can be overwhelming if you aren’t sure where to begin. However, you should be able to complete any project on your own as long as you prepare well, have the proper materials, and follow the right steps. You will get professional-looking results as long as you prepare well.