Skip to Content

Samsung Vacuum Keeps Clogging (How to Fix)

Vacuuming is a fast and easy way to get your house clean. But over time, it may incur damage from the usual wear and tear. They’re not necessarily cheap too, so immediately replacing it is not always possible. How do you fix a vacuum that keeps clogging?

Keep the hose free of any obstructions. Large pieces of debris can get stuck when suctioned, causing a clog. Instead of forcing them with the vacuum cleaner, pick them out and throw them away. Putting a net over the tip of the hose can help filter out the large pieces of debris.

Cleaning the floor using Vacuum

Keep in mind that vacuum cleaners are intended to suction clean dirty and dusty surfaces. They are not really meant for clearing debris and other small items that may be on the floor.

How to Unclog Samsung Vacuum Keeps Clogging

Cleaning the floor using Vacuum

Samsung vacuum cleaners are known for their superior cleaning performance. Being wireless and practically lightweight further adds to its appeal. That’s why it would be ideal to keep it well maintained so you can enjoy its use for a much longer period of time. 

In case your Samsung vacuum keeps clogging, make sure that the micro filter is not clogged by dust buildup. The dust bin should also be regularly cleaned for optimum performance. 

Remove Debris from the Brush

The first thing you should check when your Samsung vacuum keeps clogging is to check its essential components to make sure they’re not clogged. The parts to look out for are pipe, dust bin, and brush.

Make sure that the vacuum is off before you start looking closely at these parts. Carpet fiber, pet hair, and general hair fall are the most typical causes of blockage in the vacuum roll brush. Be careful to take them out. 

It’s recommended that you cut through them first before pulling them from the bristles. Otherwise, they may only get more entangled, making it even more difficult to remove. Also make sure that they’re not stuck between other parts too, to avoid damaging more components. 

Take note that there may be different components for different types of Samsung vacuum cleaners. A Slim Action brush unit, for example, can also be wiped off with a wet tissue or dry cloth to remove foreign matter. 

Meanwhile, the Jet Dual Brush also features a spin brush, which should be removed separately. To clean this, you only need to use a wet tissue or dry cloth for debris removal. 

If your unit has the Wet Brush, you should replace the single-use wet pads once it’s dirty. There is an option to get the multi-use wet pads, too, in which case you only need to wash it and dry before putting it back in.

The Pet Tool has multiple openings for the rolling brush. You can use the scissor-then-clear method here to remove any blockages preventing it from efficiently cleaning the surface.

Remove Debris from the Pipe

To clean the pipe, detach it from the vacuum cleaner and check for any debris. Using a long stick, push into the pipe to dislodge any blockages inside. 

If you want a thorough clean, you can also run water through it to make sure no debris or particles are left inside. Just make sure to get it completely dry first before using it again with the vacuum. 

That said, avoid any large particles or objects when vacuuming to prevent any more debris from obstructing the pipeline.

Four Reasons Why Your Samsung Vacuum Keeps Clogging

Cleaning the floor using Vacuum

Vacuums don’t simply get clogged on their own. In order to prevent it from constantly getting clogged, you need to know what’s causing the problem.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on January 16, 2023.

The most common reason your vacuum keeps getting clogged is that it suctions large pieces of debris that don’t fit well in the hose. You can usually hear it when this happens because the hose makes a gurgling sound. It could also be that the bag is full because it’s not cleaned.

Suctioned Large or Irregular-Sized Objects

It’s ideal to pick up the large items first off the surface you’re cleaning before starting the vacuum. This way, you minimize the risk of catching large or irregular-sized objects that may cause the vacuum to clog.

In some cases, the item may have sharp edges that can tear the inside of the hose as it’s being forced into the vacuum, causing more problems. 

Vacuum Hose or Bag is Full

Obstructions or large debris are not the only things that can cause clogs. Sometimes, it’s a simple matter of leaving the bag or hose full. Even dust particles can lead to a buildup if not regularly disposed of. 

Hair is also a usual cause of clogs, much like they tend to do in the drains. To be safe, make sure to empty the vacuum of its contents as soon as you’re done using it. This way, you’re always sure that the vacuum is empty, and so minimizes the risk of clogging. 

The Vacuum Suctioned Liquid 

Sometimes, it can’t be helped that the vacuum rolls over wet surface. While this shouldn’t cause a problem with the equipment directly, it could cause the dust and particles inside the bag to get wet. Once they dry up, they can turn into a hardened mass, which is what’s going to cause the clog. 

The damage can get worse over time, especially if it is left unattended. The hardened mass of dust can become stuck on the equipment and can be difficult to remove. If this leads to more buildup, then the inside of the vacuum itself will start causing problems.

Other Components are Dirty

The filter and rollers are the other essential components of a vacuum. If this is the case, then the dirt from these parts will simply be sent back into the hose, which only adds up to the debris, thus causing the clog. 

Again, the simple solution to this is to make sure these parts are clean and cleared of dust particles and hair strands. 

Related Articles

Samsung Robot Vacuum Not Working (How To Fix/Reset)

ReadyToDIY is the owner of this article. This post was published on January 16, 2023.

Samsung Vacuum Not Working (How To Fix)