You put your plate of food into your Sharp microwave but it does not turn on. The microwave is not heating up. Why is the Sharp microwave not working?
If the Sharp microwave is not working, make sure the microwave is receiving adequate energy. Plug a small appliance into the microwave outlet to make sure the outlet is working. Inspect the microwave turntable for any obstructions or signs of damage.
There are a variety of reasons why your Sharp microwave is not working but this article will help you troubleshoot those issues and how you can fix the problem.
Sharp Microwave Not Turning On
You open the microwave door to put food inside but there is no light. The microwave is not responding to any command buttons. Why is the Sharp microwave not turning on?
If the Sharp microwave is not turning on, inspect the fuses located inside the microwave. The fuses inside the microwave are designed to blow in order to immediately turn off the power to the microwave. Fuses prevent the microwave from overheating.
There are two different kinds of fuses inside a microwave. It is important to identify the correct one when trying to replace it.
Line Fuse
Microwaves have more than one type of fuse. The line fuse monitors the amount of electrical current passing through the microwave. When the current is too high, the line fuse will blow, and the microwave will not start.
A multimeter tool can test the line for continuity. If no continuity is detected, the fuse needs to be replaced.
The underlying reason why the line fuse should be immediately investigated. Any time there is a surge in electricity, there is the risk of an electrical fire.
Thermal Fuse
Thermal fuses monitor the amount of heat being produced. When the microwave is overheating, the thermal fuse will blow, immediately cutting off power to the microwave.
The reason why a thermal fuse should also be investigated is if the cause is not readily known. A faulty heating element or electrical issue will cause the microwave to overheat, posing a serious fire hazard.
Child Lock
A safety feature on Sharp microwaves is the Child Lock. Engaging this lock feature prevents children or anyone else from being able to activate the microwave.
The microwave will still have power, but the command buttons will be disengaged. The following steps will walk you through how to disengage the Child Lock feature.
Step 1: Press the ‘Clock’ button.
Step 2: Press the number 1 button.
Step 3: Press and hold the ‘Start’ button for 3 seconds.
Step 4: The word ‘SAFE’ should appear on the display screen once the Child Lock feature is turned off. You can repeat these steps to engage the Child Lock feature in the future.
Demo Mode
The ‘Demo Mode’ feature is what stores use so customers can inspect the microwave without actually turning it on or heating anything. This setting can be activated by pressing the wrong sequence of buttons. Here is how you can turn it off.
Step 1: Press the ‘Clock’ button.
Step 2: Press the zero button.
Step 3: Press and hold the ‘Stop/Clear’ button for 3 seconds.
Sharp Microwave Not Heating
You put food in the microwave and select the cooking cycle. You return only to find the food is not warm. The microwave is not heating.
If your Sharp microwave is not heating, there could be an issue with the microwave’s magnetron. The magnetron heats up and generates microwaves that travel into the microwave oven, heating and cooking food.
Replacing the magnetron can be dangerous and should only be done by a qualified technician. Another possibility as to why the Sharp microwave is not heating up is if the Central Processing Unit is defective.
Central Processing Unit
The Central Processing Unit inside the microwave is what sends out command signals to the working components of the microwave such as the carousel, timers, and the different food settings.
When the Central Processing Unit is not working correctly, the microwave will not work as it should even though it is still receiving power. A recent power surge can cause this type of issue.
One way to refresh the Central Processing Unit is to clear out the last command. If the last command is stuck, the microwave will not accept a new command.
Press the ‘Stop/Clear’ button several times in a row. After a few seconds, enter a new command and press the ‘Start’ button. The microwave should work as normal.
Sharp Microwave Not Spinning
You put the plate in the microwave and turn the microwave on. But the plate is not rotating. Why is the turntable not spinning?
If the Sharp microwave not spinning, the glass tray roller guide could be defective. Inspect the roller guide for cracks, damage, or other signs of wear and tear. If there are signs of damage, replace the roller guide.
The turntable in the microwave is important to use because it rotates the food so that it is cooked or reheated evenly. There are a variety of reasons why the turntable is no longer rotating.
[This article and its contents are owned by Ready To DIY and was first published on 05/25/2022]
Motor
The most common reason why the turntable will not turn is if there is an issue with the turntable motor. Use a multimeter tool to test whether or not the motor is receiving power.
Step 1: Remove the glass tray and support ring.
Step 2: Remove the screws located in the back of the microwave.
Step 3: Squeeze the plug to disconnect the motor’s wire harness.
Step 4: Remove the terminals connected to the turntable motor’s wires.
Step 5: Connect the multimeter tool to the terminals of the turntable motor.
Step 6: Replace the motor if there is no continuity.
Drive Coupling
The glass tray inside the microwave is powered by a motor-driven coupler. If the couple is broken or stripped, the motor will not work and the turntable will not rotate.
The drive coupling is attached to the turntable motor shaft. Gently remove the coupling from the motor shaft and inspect it for any signs of damage. If signs of damage are visible, the coupling needs to be replaced.
Obstruction
Sometimes the answer is a simple one. The turntable will not rotate if there is anything obstructing the roller guide. Even something as tiny as a poppy seed can obstruct the guide, preventing the tray from turning.
Remove the glass tray and roller guide. Wash the tray and roller guide in warm soapy water. Use a clean cloth to wipe out the inside of the microwave, removing all crumbs or other debris that could affect the wheels of the roller guide.
Sharp Microwave Display Not Working
You’ve entered the command in the display but the display panel is blank. Why is the display not working?
If your Sharp microwave display is not working, the main control board could be defective. The control board is responsible for sending commands to the other components of the microwave. The control board will need to be replaced.
The main control board can be replaced but it should only be replaced by a qualified technician. The main cause for a control board to stop working is if the control board has a missing solder or it has a faulty capacitor.
In either event, a steady hand with soldering experience is needed to replace the part. It is best to let the professionals do this type of repair.
Power Supply
If the microwave is not receiving a sufficient supply of power, the display will be blank. Unplug the microwave from its power source and plug in a smaller appliance in its place. This will let you know whether or not the outlet is receiving enough power.
Sharp Microwave Light Not Working
The light inside the microwave is a small thing but it is important. It’s hard to see our food without that little light. What does it mean when the light is not working?
If the Sharp microwave light is not working, the light bulb may have burned out. Remove the microwave cover. Locate the halogen light casing. Squeeze the light bulb casing to release it. Unscrew the old bulb and replace it with a new one.
Exercise extreme caution when replacing the light bulb. Even though the microwave is unplugged, the circuitry holds electricity for a while. Leave the microwave unplugged for at least 30 minutes for all the electricity to drain out of the microwave.
Can You Reset A Sharp Microwave?
Your Sharp microwave is not heating thoroughly. The clock stops working. The microwave is receiving power but it keeps starting and stopping. Can you reset a Sharp Microwave?
You can reset a Sharp microwave. Unplug the microwave from its power source for at least 60 seconds. After 60 seconds, plug the microwave back in. Enter the time and date. Enter a new command.
Resetting the microwave is not something we often think of doing. Like our other kitchen appliances, the microwave gets a lot of use and can become overwhelmed. Resetting the microwave will refresh the microwave’s Central Processing Unit.
[This article and its contents are owned by Ready To DIY and was first published on 05/25/2022]
Is There A Reset Button On A Sharp Microwave?
You want to reset your Sharp Microwave but do not see the reset button. Is there a reset button on a Sharp microwave?
There is not a reset button on a Sharp microwave. However, the microwave can be reset by either unplugging the microwave from its power source or by pressing a sequence of buttons to refresh the main control board.
Resetting the microwave will not harm the microwave. Aside from having to re-enter the time, the microwave will retain its functionality. The microwave can be reset any number of times without harming it.
How To Reset Sharp Microwave
You want to reset your Sharp microwave but do not see the reset button. How do you reset the Sharp microwave?
You can reset Sharp microwave by pressing the ‘Off/Clear’ button. Press and hold the ‘Off/Clear’ button for at least 3 seconds. This will reset the microwave and will refresh the control board. Enter a new command.
Microwaves are always receiving power. They are always plugged in and are always on. It is easy for the microwave’s control board to become stuck. Resetting the microwave will refresh the circuitry within the microwave, refreshing everything.
How To Factory Reset/Hard Reset Sharp Microwave
You’ve tried everything to get your Sharp microwave working correctly again but it’s still not fixed. How do you do a factory reset/hard reset on a Sharp microwave?
You can do a factory reset/hard reset Sharp microwave but unplugging the microwave from its power source. Leave it without power for at least 3 minutes. After 3 minutes, plug the microwave back in. Enter a new command.
A hard reset may sound scary, but it is nothing more than a prolonged soft reset. Oftentimes microwaves become so overwhelmed with electricity that they freeze, in a sense.
Electricity can remain inside the circuitry of a microwave for some time. Letting the microwave rest without electricity coming into it will allow the electricity within the microwave to drain out.
Once the electricity has drained out, the microwave will be clear and will respond to new commands.
How To Reset Clock On Sharp Microwave
The power is finally back on but now the clock on the microwave keeps flashing. How do you reset the clock on a Sharp microwave?
You can reset the clock on a Sharp microwave by pressing the ‘Auto Start/Clock’ button. Enter the correct hour using the keypad. Press ‘Auto Start/Clock’ to enter the correct minutes. Press ‘Auto Start/Clock’ again to start the clock.
Depending on the model of Sharp microwave you have, the microwave will not start until the time is entered. After the time is entered, the microwave is ready for use.
How To Reset Power Level Sharp Microwave
Microwaves are digital ovens that use different power settings to heat and cook food to the correct temperature. The Sharp microwave comes with standard settings but you want to ensure the settings are correct.
You can reset the Power Level in a Sharp microwave by using the ‘Power Level’ button. After the cooking time is selected, press the ‘Power Level’ button to adjust the level. Power level P-100 is the highest setting.
Copyright protected content owner: ReadyToDIY.com and was initially posted on May 25, 2022.
If the Power Level is low, the display screen will read ‘P-90’ or less. You can reset the Power Level by doing the following steps.
Step 1: Press the ‘Stop/Clear’ button two times.
Step 2: Enter the cooking time.
Step 3: Press the ‘Power Level’ button.
Step 4: The display should now read P-100, indicating the power level has been reset to the highest setting.
Step 5: Press ‘Start’ to begin the selected cooking cycle.
How To Reset Sharp Microwave Drawer
The drawer to your Sharp microwave is no longer working. The microwave is getting sufficient power, though. How can you reset the Sharp microwave drawer?
You can reset Sharp microwave drawer by unplugging the microwave from its power source. Let the microwave rest without power for at least one hour. The microwave’s capacitors store an electrical charge. The microwave needs time to drain off all remaining electricity.
After one hour, plug the microwave back in and try using the microwave drawer again. If the drawer continues to be unusable, the door switch may have failed and will need to be replaced.
[This article and its contents are owned by Ready To DIY and was first published on 05/25/2022]
Copyright article owner is ReadyToDiy.com for this article. This post was first published on May 25, 2022.
How To Reset Sharp Microwave Error
Your Sharp microwave is not accepting any commands so you re-enter a new command. The microwave still is not working. How do you reset a Sharp microwave error?
You can reset Sharp microwave error by unplugging the microwave from its power source. Let the microwave rest without power for at least 5 minutes. After 5 minutes, plug the microwave back in. Select a new cooking cycle.
Whether the error is from entering in the wrong cooking cycle or the display panel is giving an error code, removing power from the microwave will clear out the error. After power is restored to the microwave, start a new cooking cycle to see if the error code returns.
If the error code returns, consult your User’s Manual to identify what the error is. The microwave is notifying you of something that needs immediate attention.
How To Reset Sharp Microwave Filter
The control display window on your Sharp microwave reads ‘FILT’. The microwave is set to remind you when it is time to change the filter.
The filter needs to be removed and washed in warm, soapy water. Use a brush to thoroughly clean the wire mesh of the filter. Allow the filter time to dry completely before replacing it.
It is important to regularly clean and inspect the microwave filter. The filter can easily become clogged with grease, dust, or other debris that inhibit the filter from working correctly. A clogged filter presents a dangerous fire hazard.
You can pre-set the reminder on your Sharp microwave to notify you when it is time to replace the filter.
Step 1: Press the ‘Custom Setting’ button twice.
Step 2: Press the number ‘8’ on the keypad.
Step 3: Press the number ‘2’ on the keypad.
Step 4: Press the ‘Manual/Repeat’ button.
Step 5: Enter the number of cooking hours you want the filter notification to be set for.
Step 6: Press the ‘Start’ button to save the cooking time.
Step 7: Press the ‘Stop/Clear’ button to exit the filter time setting.
ReadyToDIY is the owner of this article. This post was published on May 25, 2022.
You can reset Sharp microwave filter by unplugging the microwave for at least 30 seconds. You can also reset the filter by pressing the ‘Custom Setting’ button twice. Press ‘8’ > ‘1’ > ‘Start’. Reset the counter to 0 and then press the ‘Stop/Clear’ button to exit.