Skip to Content

Whirlpool Washer Stop/Won’t Rinse/Wash

Whirlpool offers consumers a variety of different washers that vary in how they perform and how they look. No matter what individual Whirlpool model you have, there are basic troubleshooting guidelines available that you can follow if you are having issues with your model. 

If the rinse cycle on your Whirlpool washing machine is not working, it might be due to a clogged inlet screen. These screens prevent debris from entering the washer and can become blocked over time. To fix this, turn off the water supply, remove the hoses from the back of the washer, and clean the screens inside the hose connectors. Clearing these screens can restore water flow and allow the rinse cycle to function properly.

Another potential cause could be a malfunctioning water level switch. This switch controls the amount of water in the drum and, if defective, can stop the rinse cycle from initiating. To address this, locate the switch (usually near the control panel), remove it, and test it for continuity using a multimeter. If the switch is faulty, replacing it is usually a straightforward task that can resolve the rinse cycle issue.

Whirlpool Washer Stop/Won’t Rinse/Wash

A third reason might be related to the washer’s timer or control board. If the timer or control board is malfunctioning, it may not advance to the rinse cycle. Try resetting the machine by unplugging it for a few minutes and then plugging it back in. If this doesn’t work, the timer or control board might need to be replaced. This repair is more complex and might require professional assistance.

In this article, we’ll be going in-depth into some of the issues you may encounter while using your washer and how you can fix it. If you’re interested in learning more about this topic, keep on reading.

Whirlpool Washer Won’t Rinse

Washer Won’t Go Into Rinse Cycle

Whirlpool washer may spin but refuse to rinse, and this is a common occurrence that may be brought on by a few different factors. Below, we’ll explore what may be causing your washer to be unable to rinse, as well as how you can fix this issue. 

Your Whirlpool Machine May Have Loose or Broken Wires 

If your Whirlpool doesn’t enter its rinse cycle as it should, there may be an issue with the wiring in your water valve. To see if there are any loose, broken, or burnt-out wires, unplug your washer and gently pull on your wires to see if any are loose or damaged.

If you feel as if any of these issues have occurred within your machine, it’s ideal to call a Whirlpool repairer to come to inspect your equipment and fix the problem. Of course, there are smaller-scale issues that you can easily fix on your own.

Your Washing Machine May Have a Broken or Defective Timer 

If your wires aren’t loose, inspect them to see if you can notice any external damage. It’s also possible that your washer’s timer is broken or has begun to malfunction, which can affect your machine’s rinse cycle. 

If your washer’s timer has broken, you can replace the knob to get your rinse cycle back up and running again. Although sometimes more complex jobs will require assistance from a Whirlpool repairman, it’s important to be mindful of this. 

Whirlpool Washer Stopped Rinsing

Washer Started to Rinse but Stopped

There are a few factors that may cause your washer to begin rinsing but eventually stop unexpectedly. Below, we’ll explore what the problem most likely is and how you can resolve this issue. 

There May Be an Issue With Your Inlet Valve 

If your washer begins filling up and doesn’t continue to rinse after that, you may have an issue with your inlet hose being clogged or defective. Your inlet valve is responsible for opening up and filling your machine with water.

If your valve is broken or clogged, your washer may stop mid-cycle as it waits for the water to enter your machine. This is one of the most common issues that people have with your Whirlpool washers, and all you’ll have to do is replace the valve if you feel that it has become defective.

There May Be an Issue With Your Whirlpool’s Door Lock

Another factor that could be causing your washer to stop mid-cycle is your machine’s door lock mechanism. Once your washer door is closed correctly, your machine can begin acting out all the necessary cycles to successfully wash your clothes. 

If your washer’s door is not latch shut correctly, your washer may refuse to begin or even stop mid-cycle. The door lock can sometimes fail electronically, so it’s important to be mindful of that when you’re inspecting your washer door.

If you can see external damage on your washer’s door lock, it’s ideal for replacing it. If you can’t seem to identify any external damages on your door lock, you may want to contact a Whirlpool repairer to assess whether your door lock has electrically failed. 

Whirlpool Washer Won’t Wash

Washer Won’t Go Into Wash Cycle

Some users may experience their washers stopping unexpectedly right before the wash cycle. Below, let’s share some common problems that may lead your machine to stop before the wash cycle begins and how you can fix this.

Your Whirlpool May Have a Broken or Defective Lid Switch 

Your washer will not advance to the next cycle if your lid is open. If your cover is closed and your washer still refuses to enter the next cycle, you may have an issue with your lid switch.

You can easily remove and replace your lid switch with just a few simple steps. To install a new lid switch, unplug your washer and open up the control panel on your washer. Once you have successfully opened up the control panel, unplug the wire harness, connecting the control panel to the washing machine.

Copyright protected content owner: ReadyToDIY.com and was initially posted on November 10, 2020.

Once you’ve done that, you can access the lid switch by lifting the washer’s cabinet off the front of your appliance’s frame. You’ll easily be able to remove the current lid switch and replace it with a flathead screwdriver. Once you’ve got everything connected, you can readjust your machine’s frame and plug your appliance back into the wall. 

If your machine doesn’t successfully enter the wash cycle when it should, it’s ideal to look at the lid switch inside of your machine. This is a common occurrence that only takes a few easy steps to fix. 

Whirlpool Washer Starts Wash Cycle But Stop

Washer Starts Wash Cycle Then Stops

Another problem you may run into is your washer beginning it’s wash cycle, only for it to stop mid-way. Below, we’ll discuss what’s causing this and how you can fix this problem yourself. 

There May Be an Issue With Your Whirlpool’s Drive Belt

If your washer successfully begins its wash cycle, only to stop midway, it’s likely there’s an issue with your machine’s drive belt. Your belt may be broken or defective, or it may have only slipped off from its proper place during a previous load. 

You can easily access your machine’s drive belt from the back panel of your washer. While you can reinstall or replace your drive belt yourself, it’s ideal to call a repairer to assist you on the job. 

Copyright article owner is ReadyToDiy.com for this article. This post was first published on November 10, 2020.

While it may sound simple, replacing the drive belt requires making changes within your machine’s motor as well, so it’s best to contact a Whirlpool repairer to make these changes for you correctly. This is one of the most common issues users have with their Whirlpool appliances when the wash cycle begins but stops midway. 

While issues like these may be frustrating, there’s always a solution that can easily be handled by you or by a professional handyman who can fix the problem in no time. 

Final Thoughts

In this article, we discussed different issues you may face when dealing with your Whirlpool washer and how to handle them. 

For instance, if your washer isn’t rinsing correctly or at all, you may want to inspect your appliance’s wires for any damage. If your washer successfully begins rinsing but stops mid-cycle, your inlet hose may be damaged or clogged, so it’s crucial to look into that.

If your washer doesn’t perform its wash cycle properly, you may want to remove the lid switch to get things up and run again. If your wash cycle begins and stops mid-cycle, you may want to call on a professional to have them inspect and possibly replace your drive belt.

Hopefully, now you have a better understanding of how you can properly identify and fix certain issues you may be having with your Whirlpool washer. 

Related Articles

Whirlpool Washer Won’t Lock/Turn On/Unlock/Turn Off

Whirlpool Washer Won’t Fill Up With Hot/Cold Water or Won’t Stop Filling

Whirlpool Washer Repeating Cycle

How to Reset Whirlpool Washer

ReadyToDIY is the owner of this article. This post was published on November 10, 2020.

Whirlpool Washer Won’t Spin