Whether you’re renovating your backyard or just need a place to keep your gardening tools, adding a shed is a common project for improving your home. However, finding the perfect spot for your shed can be difficult. Especially if you are trying to find a perfectly level area of your yard. The good news is that you don’t have to find a level area! With the right tools, you can make almost any space work for your shed.
Can you put a shed on uneven ground? Although it’s going to take quite a bit more work, it is possible to set up a shed on unlevel ground. You’ll need some additional tools and materials to create a level area for the shed, but it is possible to put a shed on uneven ground.
Should You Put Shed on Uneven Ground?
If you’re looking for a way to set up your new shed in your backyard easily, it’s a good idea to try to find the most level area. However, setting up a shed on perfectly level ground isn’t always an option, especially if you live in a particularly hilly region or your space is limited.
Should you put a shed on uneven ground? It depends on how much work you are willing to put into adjusting the area. If you are able to even out the area by digging up parts of the dirt or building a stand for the shed to rest on, then it should be fine. If not, look for a different location.
Some potential problems to look out for include a slope that is too steep to reasonably build a platform for the shed. Another reason your yard may be uneven is because of water drainage. Try to pick a location in your yard that is relatively dry to avoid water damage to the bottom of the shed over time.
To ensure you don’t have to buy a new shed in a few years, it’s best to take the extra time to set up a platform in your yard where the shed can sit on a level structure. If you plan to just set the shed up on the uneven ground without trying to level the area or create a platform, you run the risk of causing the shed to warp over time. Warping can lead to structural weaknesses, which eventually causes the shed to collapse.
What Tools Do You Need to Put Shed on Uneven Ground?
Before you get started placing the shed in your backyard, you’ll want to gather the necessary materials. The best way to ensure your shed stands the test of time is to create a platform for the shed to stand on. A platform will help to protect your shed from water damage, weed damage, and warping over time.
In order to create a platform for the shed, you’ll need to prepare the area and gather a few basic tools. These supplies include a shovel, a tape measure, concrete blocks or gravel, pegs, string, a level, planks, and a hammer and nails. All of these tools will help you to create a level platform.
What Preparations Do You Need to Install Shed on Uneven Ground?
Installing a shed in your backyard might seem like a simple task, but if your backyard is full of bumps and ridges like many yards, you may need to take a little extra care before you can start enjoying your new shed.
Before you begin setting up your shed, you’ll need to clear the space of grass, weeds, vegetation, and debris. Next, measure out the space you’ll need for the shed and mark it with string. Using the shovel, even out the area as much as you can by hand. You can then add concrete blocks or gravel.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on September 23, 2022.
The gravel or concrete blocks are intended to give you an even base to start on when building the platform for the shed. Gravel is a great way to fill in slight discrepancies in the ground to create a level space. Concrete blocks take a bit more work because you have to set each, place a board on it, and check that it’s level. If the board isn’t level, you’ll need to dig the space under the blocks until they’re even all across the area marked out for the shed.
How to Install Shed on Uneven Ground
Installing a shed on the uneven ground takes a bit of work, but it’s well worth it in the end because it will ensure your shed lasts a long time. Before you begin, be sure to level the area as much as possible by clearing the space, working with a shovel to even out the ground, and covering the area in gravel.
Once you’re ready to build the platform, ensure the new space is level. Built a wooden platform to the dimensions of the base of your shed over the leveled space, and place the shed. If needed, build a ramp at the door to make it easy to get your lawnmower or other equipment in and out.
Building a platform for your shed ensures that it won’t warp or crumble over time from stress on the structure from an uneven surface. Additionally, adding gravel, concrete blocks, and even a weed barrier under your shed are all great ways to eliminate the natural wear and tear on the base of your shed.
Things like water and weeds can damage the bottom of your shed, so picking a space in your yard that is dry and clearing as much of the vegetation as possible will help prolong the life of the shed. Additionally, a weed barrier can help to protect the base of your shed from weeds pushing through the boards.
Wherever you plan to put your shed, it’s always a good idea to prep the space beforehand. If you are setting up your shed on uneven ground, remember that it’s essential to take the extra steps to ensure you can keep using your shed for years to come.
ReadyToDIY is the owner of this article. This post was published on September 23, 2022.