It’s no news that vinyl sheets come in different shapes and patterns. Their diverse designs, unique appearances, and cheap cost make them a brilliant choice for walls. However, the more pressing question remains; can you put sheet vinyl on walls?
Sheet vinyl can be put on walls, although vinyl planks are the more popular option. You may find vinyl easy to install and clean, not to mention they breathe new life into any wall they are put on as they add elements like texture, character, and emotion to the room.
This article explains how to put sheet vinyl on walls, what tools you’d need to successfully install them, any problems that may occur, and how to prepare your walls for vinyl sheeting.
Can You Put Sheet Vinyl on Walls?
You can put vinyl sheets on walls. Sheets have not only become a popular alternative to planks in recent times, they are also inexpensive wall design options that are available in a variety of colors and patterns.
The ability of these sheets to replicate whatever design(s) you desire, be it marble, polished wood, or intricate tiling is quite impressive and makes it a must have for anyone looking to modify their walls without breaking the bank.
Should You Put Sheet Vinyl on Walls?
Whether you should or shouldn’t put vinyl sheets on walls depends on the surface of the walls in question; is the wall flat and even, or rough and uneven? If your wall is not flat, or has some uneven surfaces, you would need to be extra careful while installing the vinyl sheet.
Additionally, you would need to consider factors like the price of the vinyl sheet, the nature of the wall in question, and the decor of the installation area. You should ensure that the walls are adequately prepared before installing vinyl sheets for them to last long.
Finally, the bond used in installing the sheets should be strong enough to withstand the pull of gravity. Otherwise, the sheets could fall off after a few days.
Here are a few extra factors you need to pay extra attention to when installing vinyl sheets on walls:
Use High-Quality Adhesive
Although some vinyl sheets have glue attached to them after peeling off the backing paper, the glue may not be strong enough to hold up on the wall due to gravity’s pull. If your glue is not strong enough, or if there’s no glue on your vinyl sheet, it is advisable to add adhesive to the wall before sticking the vinyl sheets to the wall.
By doing this, the bond between the sheets and the wall will be stronger; hence the sheet will stay on the wall much longer. Additionally, ensure that the adhesive used is resistant to mold and dew.
Take Accurate Measurements
Prior to installing vinyl sheets on walls, always ensure that you take accurate measurements of the wall’s footage because inaccurate measurements can have dire consequences on the outcome of vinyl sheeted walls.
While considering these points, remember that your walls need to be adequately prepared before you can install vinyl sheets on them.
What Tools Do You Need to Put Sheet Vinyl on Walls?
Installing vinyl sheets on walls can be daunting, however using the following tools would ensure a more seamless installation:
- Vinyl sheet flooring cut to the size of the footage of the wall
- Utility knife
- Adhesive
- Roller
What Preparations Do You Need to Install Sheet Vinyl on Walls?
While there is very little in the way of preparations, when installing sheet vinyl on walls, it is crucial to know that preparing the wall to receive the sheet is a major determinant of how long it will stay on the wall.
To install sheet vinyl on walls, start by wiping the walls with a dry, lint-free cloth. This eliminates any dust or dirt particles – the cleaner your walls are, the better the outcome of the vinyl sheet installation.
Once you’ve prepared your walls, you can install the vinyl sheets.
How to Install Sheet Vinyl on Walls
Installing vinyl sheets on your walls will be a walk in the park if you follow the steps below:
Step 1: Take accurate measurements of your wall and mark the wall’s footage on the vinyl sheet.
Step 2: Lay your vinyl sheet down on a flat surface. If your vinyl sheet comes with adhesive already applied to it, peel the backing paper down, and expose the adhesive about four to six inches from the top edge.
Step 3: Keep the backing paper out of your way during installation by lightly creasing the edge of the backing paper.
If your vinyl sheet does not have adhesive already glued to the back, then you would need to apply vinyl adhesive to the wall yourself and leave it till it feels almost dry. This typically takes about 20 – 30 minutes.
Step 4: Align your chosen vinyl sheet to the wall, and use your fingers to tack the sheet into place.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on December 6, 2022.
Step 5: Using a towel, start at the top of the vinyl sheeting and apply firm pressure from the center to the left edge and then to the right edge.
Step 6: Repeat this motion (in step 5 above) as you move down the sheet until the entire panel is covered.
Step 7: As you install the sheets, remove the backing paper a little at a time as you continue to work your way down the entire wall.
Step 8: Once you have covered the entire wall, with a towel in hand, use circular motions to press down on the sheets to be sure the adhesive is firmly stuck to the wall.
Step 9: Trim any rough edges using a utility knife.
ReadyToDIY is the owner of this article. This post was published on December 6, 2022.
Step 10: Roll over the vinyl with a roller to firmly put the sheet in place and eliminate any air bubbles.