Skip to Content

Farberware Air Fryer Timer Not Working (How To Fix)

Experiencing a malfunctioning timer in your Farberware Air Fryer can turn a simple cooking task into a frustrating ordeal. A timer is crucial for ensuring perfectly cooked meals, and when it stops working, it can disrupt your entire kitchen routine. This article aims to shed light on why the timer in your Farberware Air Fryer might be failing and offers practical steps to fix the issue, ensuring your air frying experiences remain as efficient and enjoyable as ever.

A common issue with a Farberware Air Fryer timer not working is a software glitch. To address this, reset the air fryer by unplugging it for about 10 minutes, and then plug it back in. This can reboot the system and often resolves minor software issues, restoring the timer’s functionality.

Black air fryer

In some cases, the timer issue might be due to a mechanical fault in the timer knob or button. Continuous use can lead to wear and tear, affecting its operation. Inspecting and cleaning around the timer knob or button to ensure there is no physical obstruction can be a simple fix. If the problem persists, it may indicate the need for a replacement of the timer component.

Resetting a Farberware Air Fryer might fix software-related timer problems, but if the issue persists, there could be other underlying causes. It’s important to delve deeper, considering everything from physical damage to the unit to potential electrical issues. Understanding the full spectrum of reasons behind the timer’s malfunction is key to identifying and implementing the correct solution.

Timer Gears

If the Farberware air fryer you are using has a mechanical timer, the gears can sometimes get damaged or misaligned. This can keep the timer from functioning as expected.

If you think that there are problems with the timer gears, you should remove the timer knob and inspect the gears for any damage. The knob may need to be replaced.

Infrared Sensor

In some Farberware air fryers, cooking is controlled by infrared sensors. If any interference occurs, it can keep the timer from functioning properly.

The infrared sensors can be cleaned with a dry cloth to remove debris that is causing obstruction. Make sure the sensor area is free from obstructions and cleaned regularly to prevent recurrence of this problem.

Troubleshooting Farberware Air Fryer Timer Issues

Black air fryer

It would be nice if we had the ability to have a one-size-fits-all solution for fixing an air fryer timer or any other problem. There may actually be many different things that could be wrong with the timer, including the following:

The primary cause for an air fryer timer malfunction is often incorrect basket placement. This prevents the timer from functioning and halts the heating process. To fix this, simply ensure the basket is correctly seated within the air fryer. If the basket is not model-specific, consider replacing it with an authentic part from the manufacturer to guarantee a proper fit and restore functionality.

While improper basket placement is a common culprit for a malfunctioning air fryer timer, there are several other factors that could be at play. Exploring these additional reasons can help pinpoint the exact issue and guide towards the appropriate solution.

Moisture in the Control Panel

The control panel for the air fryer can be thought of as the computer that operates the unit. It’s not extremely sophisticated, but if you do have a problem with moisture or oil in the control panel, it can keep the timer from operating.

The only way to fix this issue is to remove the panel and dry it inside. You may be able to wait it out and allow the water to dry over time, but it is going to take a while because it is sealed.

If you do have to remove a panel to clean the control panel on the inside, make sure that the air fryer is unplugged. You should also check to ensure that you don’t have a warranty so you don’t void it.

Thermal Fuse

Most air fryers have various checks and balances to ensure that they don’t overheat. One of these is a relatively simplistic device known as a thermal fuse. If the thermal fuse detects high temperature, it will disconnect from power.

If the thermal fuse is blown, you have no other choice than to replace it. The thermal fuse is a one-use product, so once it does its job, it cannot be repaired.

Fortunately, the thermal fuse is relatively easy to replace. You will have to take apart the unit, so just make sure you unplug the power first.

Timer Knob (Mechanical)

Most air fryers are digital so this isn’t going to be the case with every unit. If you have an air fryer that is using a mechanical timer knob, however, it may be misaligned.

The mechanical timer knob should pull off of the shaft with just a little resistance. Once it does so, make sure that it is replaced properly.

You should also check the timer knob for any damage. If the plastic is worn or shows other signs of damage, it should be replaced with a new timer knob.

Copyright protected content owner: and was initially posted on December 28, 2023.

Heating Element

The heating element may not necessarily be a part of the timer mechanism, but it can affect the ability of the timer to work. If the heating element is not working, it may stop the timer from working altogether.

Most heating elements are internal and in some units, you will not be able to access the heating element without damaging the unit. If you are able to get to it, make sure that you unplug the air fryer before removing the panel.

Once you have access to the heating element, use a multimeter to check it for continuity. If it doesn’t check for continuity, it will have to be replaced. A malfunctioning heating element cannot be repaired.


Although it doesn’t happen very often, there are times when incorrect temperature or time settings can affect the timer. This is true in many air fryers that are more sophisticated, as everything needs to work together in order for it to prepare the food.

The only way to fix this problem is to check the owner’s manual and ensure you have the correct time and temperature settings entered.

Power Supply

If the air fryer timer is not working and none of the lights are operating, it could be a power supply issue.

The easiest way to check an air fryer power supply is to move the unit to another location and try plugging in the air fryer to a different receptacle. Make sure that the receptacle is located on a different circuit.

You can also test the receptacle at the location of the air fryer if you don’t want to move it. Use a lamp or another device to plug in and check to ensure that the receptacle has power. Keep in mind that receptacles can be switched, with one side having power and the other side not having power.

Air fryers can pull a lot of energy and sometimes, they may trip a circuit breaker. Try to run the air fryer on a different circuit or don’t run any other heavy appliances while you are operating it on the same circuit. If the circuit breaker has tripped, it will need to be reset.

Look in the breaker panel for a circuit breaker that is out of line with the others. It may have a red stripe down one side, indicating that the breaker has tripped. Turn the breaker off and back on again to reset it.

Copyright article owner is for this article. This post was first published on December 28, 2023.

If the circuit breaker continues to trip repeatedly, you should have an electrician come out and repair the problem. Do not attempt to replace the circuit breaker on your own.

Circuit Board

One other possibility is that the circuit board has been fried. This can occur due to something spilling on the electronics or because of a fluctuation in the power grid.

It may be possible to replace the circuit board in some air fryers. To do so, you will have to remove panels, so ensure that the air fryer is unplugged before you begin working.

Some air fryers do not have the option of replacing the circuit board. You may have to send it in for servicing or you might have to replace the air fryer altogether.

Things To Watch Out For

Black air fryer

An air fryer is one of the most convenient kitchen appliances we have available. When the timer isn’t working, we want to get it back up and running quickly. What can be done?

When an air fryer timer is not working, it often indicates a malfunction in the control panel. This issue can be resolved by resetting the air fryer. Unplug the device, wait for a few minutes, and then plug it back in. This reset can refresh the system and often restores the timer’s functionality.

This is only one of the many different options you may have available for getting the timer working in the air fryer again. Sometimes, it may be more in-depth repair, and in others, it may be specific to the type and model you are using.

In some cases, the air fryer may be working but it will not shut off automatically because of the timer problem. Although you may be able to use the air fryer without the timer, it is not recommended to do so.

Risks of Operating Air Fryer With Broken Timer

There is a danger associated with having the air fryer running and not having it shut off automatically. We tend to get busy when we are working in the kitchen or around the house and it is not out of the question for us to forget that it is turned on.

The danger is so real with this appliance that some manufacturers recommend that you shut off the air fryer when it is not in use. Therefore, even if the air fryer is working but the timer is broken, you should have it fixed before you use the air fryer for any heavy use.

There are also a number of different ways that the air fryers may break. In many cases, the timer just stops working and it is no longer counting down but this is only one of the many different possibilities.

Some air fryer timers will work to a certain point and then they will get stuck and not move any further. Others will make a loud noise while they are counting down and still others may not time properly, which could result in undercooked or overcooked food.

Perhaps the most dangerous of all of the problems is when an air fryer timer will count down but the unit will not turn off when it reaches the end. It is easy to overcook your food in this case and it can even be a fire hazard.

Dangers of Removing Air Fryer Cover/Panel

As mentioned in the article above, you will find that there are times when you must open the air fryer to do some work on the inside. This is something that you should consider carefully before doing.

First of all, never remove a cover or panel on the air fryer or any appliance while it is still connected to the circuit. Make sure you unplug the air fryer first and allow it a few minutes for any residual energy that may exist to dissipate.

Always make sure that the covers are back in place and there is no exposure to any electrical parts before you plug the unit back in again.

You also need to consider the possibility that there is a warranty on the air fryer. If there is a warranty, then they may repair the timer or perhaps even replace the air fryer if the problem is sufficient.

On the other hand, if you open the air fryer by removing the panel or doing any work on the inside, you are likely going to void the warranty and the possibility of having the company fix the product on their own. It is always best to check with the company or the store where you purchased the air fryer first to see if a warranty exists.

Multipurpose Air Fryers and Smart Technology Features

One other thing to consider is the possibility that you have an air fryer that serves multiple purposes. In addition, there are some air fryers that have smart technology and may update automatically.

Multipurpose air fryers, typically those that are included in an oven setting or perhaps that have a toaster in addition to the air fryer are more difficult to repair. The timer may be associated with both the air fryer and the other units attached to the air fryer, so you need to approach this differently.

Generally speaking, it is better for you to have a multipurpose air fryer looked at by a professional. You may be able to do some of the work on the air fryer, but having a professional look at it is better because this is typically a higher-end unit.

Finally, the smart technology that we discussed means that the air fryer is attached to Wi-Fi. Software updates may occur from time to time and the appliance will likely update automatically in the background.

ReadyToDIY is the owner of this article. This post was published on December 28, 2023.

Keeping the software up-to-date is an excellent way to ensure that the air fryer timer and all other parts of the air fryer are working properly. On the other hand, if the update was rolled out too early, it may cause problems and you simply need to wait for a new software update before the timer starts working again.