An LG washer is one of the most technologically advanced machines on the market. However, when the lid lock is not working, the washer will not function, and you will have a problem doing your laundry.
An LG washer lid lock not working can be due to a faulty door lock motor and switch assembly, damaged door latch, door strike, or main control board. Inspect these components for damages and replace them.
The lid lock keeps your washer closed for the washing cycle to begin. Therefore, if it’s not working, the washer won’t function. The door lock assembly can experience a mechanical failure when it doesn’t latch properly or an electrical failure when the door switch lacks continuity. Replace the door switch if damaged.
Check the door latch and door lock for any faults and replace them. Likewise, check the door strike for any damages and replace it. If all the door lock assembly components are working correctly, but the washer lid lock still doesn’t function, have a professional serviceman check the main control board for any faults and replace it if damaged.
LG Washer Lid Locked No Power
An LG washer has a safety lock mechanism to keep you and your family safe. When this feature malfunctions, your wet laundry can get stuck inside the washer.
LG washers locked with no power can be due to too hot laundry, high water levels, power outage, tripped circuit breaker, blown house fuse, broken door latch, or corroded door hinges. Call a service man to check these components and replace any broken ones.
Unplug the washer and wait for the water to cool. Locate the emergency drain hose on the left side of the washer and set out a bucket to collect excess water. Once you drain the water, remove the top cover and locate the flag to emergency unlock the door.
Lift the door handle slightly and try pulling it in your direction to unjam it. Alternatively, try cleaning the hinges to see if the door unlocks. Switch off the circuit breaker, wait five seconds and switch it back on. Press the power button to see if it works.
Once you open the door, get a serviceman to check the circuit breaker, house fuse, and door lock assembly and replace any damaged components.
LG Washer Lid Lock Clicking
It’s normal for an LG washer to produce a soft click when you open or lock the door. However, if the lid lock keeps clicking, it indicates an underlying problem.
LG washer lid lock keeps clicking when an insecure lid attachment occurs due to a loose door latch pin or a faulty door lock assembly. In addition, a broken door sensor can cause this problem. Inspect these parts for damages and replace them if broken.
An LG washer has a plastic door latch that locks the door when you push it inside. When the latch is broken, it can cause a clicking sound, and the door won’t shut properly.
The washer has a door sensor that detects when the door is closed to begin a washing cycle. Thus, when the sensor malfunctions, it will keep locking and unlocking the door, causing the clicking sound. Get a service member to inspect these parts and replace any broken ones.
LG Washer Lid Lock Error
An LG washer will display an error code on the front panel to notify you of an underlying issue and simplify troubleshooting.
An LG washer will display dE on the front panel with a lid lock error. The error can occur due to a faulty door latch, damaged door hinges, or a door that isn’t shut correctly. Turn off the washer and hold the start button for five seconds to clear the error.
Lock the door properly before clearing the error. If the error won’t clear, the door has not locked. Check the lock assembly for any faults and replace it if broken. Inspect the door latch for any damages and replace it if broken. Likewise, check the door handle and the hinges for any faults and replace them if damaged.
Copyright protected content owner: ReadyToDIY.com and was initially posted on 2022-09-14.
LG Washer Lid Lock Stuck
The LG washers lock mechanism keeps the washer closed during washing to prevent the door from accidentally opening mid-cycle to prevent accidental flooding. When the lock mechanism is faulty, the door lock won’t open even when the cycle is complete.
An LG washer lid lock may get stuck due to a faulty door strike, door switch, damaged door hinges, or malfunctioning main control board. Remove the top cover and locate the lid lock. Push the lock fasteners aside to unlock the stuck lid.
If your washer is a top loader, wait 15 minutes for it to cool and try unlocking the door. Top loaders have heat-activated locks, thus allowing the washer to cool may solve the issue. And if it’s a front loader, drain the water first, open the top cover, locate the door lock, and move the fasteners to unlock it.
Check the door strike for rust or debris and clean it. If it still doesn’t unlock, replace it. Likewise, inspect the door hinges for rust and replace them if broken. Reset the washer and see if the door will open. If it doesn’t, contact a service professional to check for any main control board malfunctions and replace it if necessary.
LG Washer Lid Lock Broken
When an LG washer lid lock is broken, it can interfere with the normal functioning of the washer. As a result, you might get stuck with loads of laundry to do. Nonetheless, you can solve the issue once you identify the cause.
You can identify a broken LG washer lid lock by checking the door latch, door strike, door hinges, pressure switch, and main control board for damage. Replace any of the broken parts to solve the issue.
The door switch seals the washer door to prevent it from opening. In a top loader, it’s activated by heat. Check for damages and replace it.
The door strike locks and unlocks the washer when in use. It can rust due to moisture, causing the accumulation of lint and debris. Check if it’s broken and replace it. Likewise, the hinges may loosen and deteriorate due to constant use. In this case, check the hinges for damages and replace them.
How To Reset LG Washer Lid Lock
Although an LG washer is one of the most reliable washing machines on the market, it sometimes develops technical problems that can interfere with its efficiency. A simple reset may resolve the issue when the lid lock is malfunctioning.
You can reset an LG washer lid lock in a simple process. Unplug the washer and press and hold the power button for five seconds before releasing it. Press the pause/play button and hold it for five seconds. Plug the washer back in to complete the process.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on 2022-09-14.
Resetting an LG washer is a simple process that requires no equipment. When the lid lock malfunctions, it’s normal to check the lid switch, door strike, and other components for damages. However, try resetting the washer first before spending money on repairs. Call a service member to check and resolve the issues if you reset the washer and the lid lock malfunctions.
Can You Bypass LG Washer Lid Lock?
Although an LG washer lid lock is necessary for safe operation, the machine may face serious problems when it malfunctions.
You can bypass an LG washer lid lock, but it’s a delicate process requiring basic wiring knowledge. Thus, experts do not recommend it unless it’s necessary. Contact a serviceman to perform this procedure if you are not adequately trained to handle such cases.
Appliances experts do not recommend bypassing the LG washer lid lock unless in necessary cases. For instance, if the washer traps wet laundry, it will be required to bypass the lid lock to avoid bad smells and mold.
Sometimes when the washer has an issue, you must inspect its interior parts, and you can only do so when the door is open. Considering that the washer can only operate with a locked door, bypassing the lid lock is necessary in this case.
Bypassing an LG washer lid lock should be your last option and a temporary solution. Operating a washer without a lock can be dangerous, even fatal. Therefore, ensure that a professional inspects your washer and replaces any damaged parts instead of bypassing the lid lock.
How To Bypass LG Washer Lid Lock
Bypassing a lid lock is a delicate process that involves cutting and joining several wires. As a result, it can void your manufacturer’s warranty.
Remove the rear panel to locate the lid switch to bypass an LG washer lid lock. Place a magnet between the lid switch and the appliance to achieve a magnetic connection. Lower the lid and plug the washer back. Turn the washer on, lift the lid and run a washing cycle.
You can bypass an LG washer lid lock in five simple steps.
Step 1: Unplug the washer and move it away from the wall.
Step 2: Unscrew the top horizontal panel and locate the lid lock switch.
Step 3: Place a magnet between the lid switch and the washer to achieve a magnetic connection.
Step 4: Replace the top panel and plug the washer back.
Step 5: Turn on the washer, and lift the lid. If the washer continues running, you have successfully bypassed the lid lock.
An LG washer lid lock won’t function If the door lock motor and switch assembly, door latch, door strike, or main control board are malfunctioning. Ask a professional to check these parts for damage and replace any broken ones.
ReadyToDIY is the owner of this article. This post was published on 2022-09-14.