Samsung Dryer Won’t Stay On or Stops Drying

Samsung Dryer Won’t Stay On or Stops Drying

It is highly likely that you have encountered a Samsung product before, be it a smartphone, electronic, or home appliance. A Samsung laundry dryer is rated to be one of the most reliable machines in the market. However, even with its numerous benefits, it also has its setbacks.

You can fix a Samsung dryer that is not drying your clothes properly by inspecting the moisture sensors and ensure that they are clean. Avoid overloading your dryer with clothes. You can take specific measures like replacing the thermal fuse, electronic control board, dryer timer, or drive motor. 

This article will look at the two major problems that can affect your Samsung dryer. It will also highlight the various steps you can take to mitigate the problem. Additionally, you will also get some additional tips that can help you ensure that such a situation does not occur again.

Samsung Dryer Won’t Stay On or Stops Drying: Causes / How to Fix It

Samsung Dryer Won’t Stay On or Stops Drying: Causes / How to Fix It

Have you ever encountered a problem with your dryer failing to dry your clothes or not staying on even after several attempts at restarting the appliance? The experience can be nerve-wracking, especially when you have a bucket load of clothes to wash. Fortunately, the solutions are simple to implement.

Clean the Moisture Sensors

When your dryer suddenly stops drying your clothes, it is highly likely that it is malfunctioning due to the two electrodes that act as the moisture sensors not detecting any moisture from the clothes in the drum.

It mostly happens when lint and dirt accumulate with time covering the sensors. To ensure that your dryer works efficiently, you need to clean your unit’s moisture sensor using fine-grit sandpaper to scrub off the dirt on it and a damp rag that has a drop of soap.

Once you finish cleaning the moisture sensors, test your dryer to ensure that it is working correctly. When doing laundry, set the auto-dry settings, and check to see if the clothes are still damp.

If cleaning the sensor does not resolve the problem, you may consider replacing the moisture sensors or finding other alternatives like contacting a repairman.

Avoid Overloading Clothes in the Drum

You may consider to double your drum load when washing clothes to save on time and energy. However, your Samsung dryer may cease to function once you overload it with clothes. When your dryer is overloaded, its motor pulley tries to run during the cycle continuously. The weight causes friction to burn through the belt that turns the drum.

Additionally, the pulley may also break, and the motor can burn out. Too many clothes also prevent the proper circulation of air in the drum. Your dryer, therefore, has to use more energy and time for your clothes to dry.

It would help if you managed your load better by ensuring that you only set the clothes that match your dryer’s capacity. But how much load is appropriate for your dryer? You should ensure that your clothes fill less than two-thirds of the tub. Always consider the weight of the water and fabric as they can affect the effectiveness of your dryer.

Use the Correct Settings

All cloth dryers use the same principle of introducing hot air and drawing out moisture from the drum’s clothes. It works the same for all models and makes, be it electric or gas-powered.

However, modern dryers have adopted additional settings to help improve the drying process. Using the same settings throughout may not get you the results you want to achieve. There are other settings you can utilize that can give you a better result from your dryer.

For example, A Samsung dryer has settings such as the Eco Dry that reduce the amount of heat used and make the drying cycle longer. You can also use the Sensor Dry settings that stop all the dry lightweight items from over-drying. 

Before you can use your Samsung dryer, first double-check your active settings to make sure you are using the right one.

Unclog Your Dryer Vent

A dryer vent full of dirt and lint may be one of the top reasons your dryer is not drying clothes. When the vent is clogged, there is no space for the humid air to escape from the dryer. The moisture is then trapped in clothes forcing the dryer to spend a long time drying them.

Your dryer vent can get clogged by lint and debris that escapes from the lint trap and collects in the duct and fabric softener residue that sticks to the sides of the duct.

Once you know the points where the vent starts and ends, you can disconnect the duct from the dryer and away from the wall duct. If you have an electric dryer, it should be an easy process. By disconnecting, you will get enough room to work.

Note: When your dryer won’t stay on, check to see if there is an error code that pops up or blinking lights. You may be in a position to resolve the problem by troubleshooting the error code. Additionally, check to see if you accidentally put the child lock on. When the child lock is active, the start button does not work.  

Samsung Dryer Not Completing Cycle: Causes / How to Fix It

Samsung Dryer Not Completing Cycle: Causes / How to Fix It

A clogged exhaust vent may force your Samsung dryer to stop before completing its cycle. When the exhaust vent is blocked, the dryer may overheat, tripping the thermal fuse. Therefore, you have to take regular measures that protect the dryer from overheating, such as clearing dirt and lint from the exhaust. 

Below is a video on how to troubleshoot a Samsung dryer that shuts-off mid-cycle:

Additionally, inspect the thermal fuse to check if it may be the reason the dryer does not complete the cycle. Since it does not reset once it trips, you have to replace it.

Sometimes the problem may lie with the motor relay. Naturally, it should keep your dryer running after you press the push-to-start switch. However, the dryer sometimes stops the moment you release the push to start button. 

A failing drive motor, too, may cause a dryer not to complete its cycle. The drive motor plays a critical role in the rotation of the drum during a cycle. It is also responsible for rotating the blower fan blades. When it fails, it may shut-off mid-cycle and restart once the motor cools down. It is best if you replace the drive motor once it starts to show signs of failing. 

If none of the above solutions pay off, then the problem may be within the electronic control board. Although it may be receiving voltage, there is a chance that it is not transmitting sensory signals accurately. Determining that the electronic control board is the problem is not easy. But you can find help from a professional dryer technician.

Final Thoughts

When your dryer’s vent is clogged, it may start and stop abruptly before your clothes are dry, leading to overheating of the thermal fuse. You can prevent this by taking regular measures of cleaning the lint from the exhaust system.

All dryers operate when the door is closed. Therefore, your dryer may stop running if it has a weak, faulty, or broken door. Other factors that can affect your dryer include a defective electronic control board, a bad drive, and a failed timer.  

A maintenance specialist can help you make the necessary electrical replacements to ensure your dryer runs smoothly.

Related Articles

Samsung Dyer Won’t Turn Off

Samsung Dryer Won’t Turn on/Powers On But Won’t Spin

Recent Content