Skip to Content

Can You/Should You Paint Over Fake/Faux Wood?

Painting over fake/faux wood is an excellent way to freshen up faux wood surfaces to make them look newer or to match a new decorating scheme. But the trick to this process is to clean and prime before adding paint. You must also sometimes sand if the surface is very glossy.

Painting the faux wood using paint roll

You can certainly paint over faux wood but you must clean and apply latex primer and paint. A good sanding is also recommended if the finish is very slick, glossy like veneer. For unfinished wood, opt for oil-based paint and primer. Be sure to wipe down with a damp cloth to remove dust and particles.

Painting faux wood is an easy way to revitalize and update quickly and affordably. You can create a stunning space on a budget. While you can just clean, prime, and paint fake wood using latex primer and paint, faux wood must be sanded first to remove the glossy finish, and use oil-based primer and paint.

Can You Paint Over Faux Wood Paneling?

Painting the faux wood using paint brush

The presence of dark-colored faux wood paneling looks outdated but doesn’t mean a full-scale remodel is the best solution. A coat of paint can be applied and freshen up and give new life to the paneling. Painting faux wood paneling is an easy way to revitalize and update wood quickly and affordably.

It takes a little more effort with painting paneling than just painting a wall since you need to prime it with a stain-blocking primer first. The stain in the wood will discolor the paint. Then follow up with good latex paint.

After you have primed your surface and it has had adequate time to dry, apply the first coat of paint. Be sure to mix the paint up well before beginning and begin with any cracks or hard-to-reach areas. Use a roller for the majority of the surface after hard-to-reach areas have been covered and are sure to apply evenly on the first coat you apply before beginning a second or third coat.

Can You Paint Over Faux Wood Blinds?

confused man standing

Over time blinds can become yellowed and dirty looking. But painting blinds is the most cost-effective way to give them new life. A few cans of spray paint can change the look of your blinds without spending a lot of money. A good washing must be done first to remove dirt and grime.

Painting over fake/faux wood blinds is very possible. First, remove them and clean them well. Arranging them so that you can get an even layer of paint is key as you are steady with your passes to ensure an even coat is applied.

This process can be a little tricky so be sure to take the time to revolve the strings out of the way and lay the blinds out so that you can have room to paint them and their sides evenly. After they dry you can turn them over to apply the same technique to the other side. When done, replace the strings and install the blinds back up. Once completed, you will be proud of the extra effort you put into painting your faux wooden blinds.

Can You Paint Over Faux Wood Furniture?

Painting the furniture

Painting over fake/faux wood is an economical way to update furniture to make it look newer or to match a new decorating scheme and is also an easy way to revitalize and update faux wood quickly and affordably. But the trick to this process is to clean and prime before adding paint. You must also sometimes sand if the surface is very glossy.

You can prime and paint faux wood as if it were a solid wood piece of furniture! You must also sand if the finish is laminate because of the gloss. When sanding, you should use a grit of at least 120 and you need not worry about the grain since it is faux wood.

Copyright protected content owner: ReadyToDIY.com and was initially posted on August 15, 2022.

Before you begin painting you’ll need to complete some prep work, including any repairs, sanding, and cleaning. Then prime and let dry completely. Then apply paint.

Can You Paint Over Faux Wood Cabinets?

confused man standing

If you have outdated faux wood cabinets you can’t afford to replace, painting them is the best option for updating this kitchen storage staple. Painting faux wood is an easy way to revitalize and update faux wood quickly and affordably. Here’s how to paint laminate cabinets like an expert.

Beginning with some prep work is essential before adding paint to your cabinets. Make repairs and sand then clean before painting. Use 120 grit sandpaper, with faux it is not necessary to worry about the grain, then prime, possibly sand again then apply your paint.

Can You Paint Over Faux Wood Beams?

Painting the wood beam

Today, people look for ways to add character to their house, but many don’t think about the possibilities on their ceiling. Painting or hanging a new light can add a new look, but if the character is what you seek you may want to think about adding a wood beam and painting it.

Painting over faux wood beams can be fairly easy, but may require some work depending on if there was already a beam in place. Sanding and/or stripping paint and applying new paint are all that will be required in most instances.

Another approach would be to add an appropriate stain to the wood to add that touch of character you may be seeking. It is recommended to use a water-based acrylic stain for wooden beams that will work well with the grains. Be sure to add your sealant after painting to help longevity and wearing from cleaning over time.

Can You Paint Over Faux Wood Doors?

confused man standing

Doors can be another area to focus on when trying to update or give a room a new look. Depending on the material, most can easily be painted which can be more cost-efficient as well. Be sure to properly prepare the surface before painting, as this could eliminate some issues.

Faux wood doors can be painted very successfully by using the correct type of paint and thoroughly preparing the doors’ surfaces. Apply some extra effort to make sure the doors are sanded really well before painting, but this will help you achieve a professional finish.

Deciding to paint a faux door depends on if you are willing to do the proper prep work to ensure that the paint will bind to the surface and give it a long lifetime. Going that extra mile can really make a difference and in the end, provide you with a great look that will last much longer if you don’t put in that extra time. This includes sanding and priming before painting, which requires much more time than just beginning with paint, but it will be worth it.

Can You Paint Over Faux Wood Window?

Painting the window

Yes, you can paint faux wood windows. But first, you need to sand the window frames prior to painting them to help the paint adhere. You can use 220 or 240-grit sandpaper. Wipe off and apply paint. A great way to brighten windows.

Can You Paint Over Faux Wood Floors?

confused man standing

It is certainly possible to paint over faux wood flooring and, for the most part, it is also a good idea. But you first must prepare the floor properly and ensure that it is free of defects. You can expect the paint to last for many years and add beauty to the home.

Can You Paint Over Faux Wood Shutters?

Painting the shutter

Yes, you can paint faux wood shutters. If they are new, check with the manufacturer to see if they need any special cleaning before painting according to the instructions of the manufacturer. If the shutters have been around a while, you’ll need to clean them before painting.

What Tools And Preparation Do You Need To Paint Over Fake/Faux Wood?

confused man standing

Faux wood was extremely popular in the 1970s and 1980s, many people when buying a home today, find it throughout the home but can’t afford to replace it, painting it seems to be the most cost-efficient answer to making a change without breaking the bank.

The tools and preparation you need to paint over fake/faux wood include a putty knife and wood putty, and 120 fine grit sandpaper. Next, you will need a clean damp cloth for wiping it down then it will be ready for primer and paint.

Unlike real wood, sanding with the “grain” on the faux wood is unnecessary, making it a little easier to prep. After the first coat of paint has had time to dry you may add a second coat if needed it may take up to 48 hours depending on the type of paint. You will want to use a clean brush to paint the cracks and get into the corners but then you can use a roller to paint what is left after that.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on August 15, 2022.

How To Paint Over Fake/Faux Wood Properly

confused man standing

With the proper technique and following a few simple steps, painting over faux wood can be a relatively easy task. Like anything, doing a little research upfront can save you some time in the long run when completing a task that you have never done before.

Step 1: Sand with 120 grit sandpaper in a counterclockwise motion

Step 2: Clean the surface with a damp cloth

Step 3: Prime the surface

Step 4: Sand with a higher grit (320 or 400) to make it smooth, vacuum and wipe down

Step 5: Paint the surface, let dry and apply another coat

Painting a surface of faux wood is absolutely possible if you should be answered if you are simply up for the task. Following the correct steps will ensure a successful project that includes sanding, cleaning, priming, more sanding then finally applying 1-2 coats of paint depending on the type of paint and the surface.

Related Articles

Can You/Should You Paint Over Steel Doors? (How To)

Can You/Should You Paint Over Steel Siding? (How To)

Can You/Should You Paint Over Steel Sink? (How To)

ReadyToDIY is the owner of this article. This post was published on August 15, 2022.

Can You/Should You Paint over Steel Rims? (How To)