A soft reset is done by unplugging the power, but some Netgear routers also have a power button. Both work to do a soft reset. A factory reset is done by holding down the factory reset button for 7 seconds. A bent paper clip is required to press it as it’s located inside a pinhole sized hole.
If your Netgear router lights aren’t on, blink, or won’t work, you should turn it off, disconnect the copper wire from the back, plug it into a phone line, and dial a number to reset it. Connect it to the router when you’re done, then test it again. Service provider issues can make the lights fail.
If your Netgear password isn’t working, it’s likely because the password is mistyped, old (and since changed), or recently reset. Other common Netgear router password issues include new internet provider security measures, enabled Smart Connect, a faulty router, or a brief power outage.
If your Netgear router cannot find (or keeps changing) your IP address, possible causes include low WiFi signal quality, improper wireless security settings, outdated software, or physical/technical interference. Fortunately, most causes are easy to fix.
When living in a tech-savvy world, it only makes sense that we will encounter some problems. One of the most frustrating problems we can face …
If your Netgear router is not broadcasting wifi or won’t turn on, confirm your router is receiving internet from your ISP. If your phone tells you “connected, no internet,” your modem is not providing a connection. Plug a desktop or laptop into the router or model itself with a LAN (ethernet) cable.
It’s easy to overlook that routers get firmware updates. These updates are not brought to people’s attention, but are important and should be checked on …