GE is known for its reliable appliances across the board, and when it comes to dishwashers, they offer customers a wide variety of models that get the job done, and done well. However, if you have a GE dishwasher that will not start, what can be done to get things running again?
If your GE dishwasher isn’t starting, confirm that the appliance is receiving power, be sure that the door has been completely shut and is latched, hold down the ‘Cycle Select’ and ‘Start’ buttons for 5 seconds to see if the latch switch is faulty, and try resetting the device.
When it comes to washing dishes, of course, you can take the time to hand wash them in your sink, but the beauty of modern appliances is that this particular option doesn’t always have to be the only way to get your dishes sparkling again. If you are fortunate enough to have a GE dishwasher in your space, but notice that it will not start, continue reading below to find out exactly what can be done to resolve this issue and get things up and running quickly.
GE Dishwasher Not Starting
If you are looking for a reliable appliance brand, there are few that can beat the quality and resilience of GE. Although this may be true for the majority of the time with GE dishwashers, appliances, no matter what the brand, is going to experience issues from time to time. If you own a GE dishwasher and it isn’t starting, don’t alarm yourself, but read on to see what can be done to get your appliance back into working order once again.
If your GE dishwasher is not starting, one of the first things you need to do is check to make sure that power is getting to the appliance. Check the room and see that power is present and if it is, pull the dishwasher from its space and confirm that it is plugged in. If it is not, restore power.
Have a different brand of dishwasher, checkout our dishwasher not starting article.
GE Dishwasher Not Starting Just Beeping
When you start a GE dishwasher, there will be a few buttons pressed to get the process going, which will be confirmed by a beeping sound. However, if you complete this process and are waiting to hear the washing process start, yet only hear a beeping noise, you are likely wondering what might be the cause of the issue. If you have a GE dishwasher and it is not starting, but is beeping repeatedly, what is the cause and what can be done to stop it?
If your GE dishwasher isn’t starting but is beeping continuously, this is an indication that the door has not completely latched, which will delay the wash cycle from starting. Be sure to close the door completely until you hear the latch engage, then try starting the appliance once more.
Amazon has an assortment of GE Dishwasher Control Boards in case you couldn’t get it restarted.
DID YOU KNOW:
GE dishwasher noise often results from a hard object that has fallen into the bottom of the appliance, hitting the spray arm. This can produce a loud rattling or banging noise during operation. To fix this, stop the dishwasher, remove any foreign objects from the bottom, and ensure the spray arms can rotate freely.
GE Dishwasher Not Starting Three Beeps
GE appliances may not be able to speak to you to indicate problems in the same way that humans can, luckily for owners though, they can communicate different error codes through lights and sounds. For a GE dishwasher, this means that there are different sequences of sounds for different issues, which brings us to unearthing what three beeps mean.
If your GE dishwasher isn’t starting and you can hear three beeps, this is an indication that the door is not latched. To see if the latch switch is the issue after closing the door, press ‘Cycle Select’ & ‘Start’ for 5 seconds. If LED lights blink, the appliance is recognizing the door as open.
GE Dishwasher Not Starting No Lights
No matter what model of GE dishwasher you have, there are going to be lights on the display panel that indicate what is happening during the cycle or give you the ability to find the correct button to push to begin the cycle of your choosing. However, if you go to start your dishwasher and notice that no lights are appearing on the panel and the dishwasher will not start, you then need to find the reason for the issue as well as a solution to remedy the problem.
If your GE dishwasher is not starting and there are no lights, this means that no power is present within the appliance. Check to make sure that the area is receiving power by locating your breaker box and seeing if a switch is flipped. If it is not, check that the appliance is plugged in securely.
GE Dishwasher Not Starting Light Blinking
As previously noted, GE dishwashers communicate with owners by displaying various blinking lights and sounds to relay what is going on with the appliance when problems arise. This is certainly advantageous for owners, as they are able to know exactly what is going on with these messages, unfortunately though, they do often mean that something has gone awry. If you have a GE dishwasher that isn’t starting and there is a light blinking, what does it mean?
If your GE dishwasher isn’t starting and a light is blinking, this could be caused by a power surge. To reverse any adverse effects, press and hold down the ‘Start’ button on the device for two minutes. This should cause the dishwasher to reset and will stop the light from blinking.
GE Dishwasher Not Starting Lights On
You know that if no lights are present on your GE dishwasher, then no power is coming to the device, which would be the reason for it not starting as it should. However, if you are trying to start your GE dishwasher and the lights are on, power is present, which begs the question of why the appliance will not work as it should. If you have a GE dishwasher and it is not starting but the lights on the display panel are on, continue reading below to see what you can do.
If your GE dishwasher isn’t starting but the lights are on, check to ensure that the ‘Delay Start’ button has not been turned on. You will see an hour indication on the display screen if it is and you simply need to press the button until no hours are showing to start the cycle.
GE Dishwasher Not Starting Door Sensor
To start any cycle with a GE dishwasher, the door must completely shut and latch before the process begins. When the dishwasher recognizes that the door is closed, this is caused by the door sensor confirming that a successful latch has been made. Some owners have found though that when their dishwasher doesn’t start, the problem is suspected to come from the door sensor itself, therefore, how can this be confirmed and resolved.
If your GE dishwasher is not starting and you suspect the door sensor to be the issue, hold down the ‘Cycle Select’ and ‘Start’ buttons for 5 seconds. If the lights on the display are solid, the door is latched. If the lights are blinking, the door is not latched, which is causing the sensor to go off.
GE Dishwasher Not Starting Cycle
Whether you are needing your dishes steamed, are looking to get them cleaned from start to finish, or have a light load that needs a simple rinse, you expect your GE dishwasher to be able to start without a problem. Although this is typically the case for most owners, there are times when they go to start a cycle, but their dishwasher refuses to comply. If you own a GE dishwasher and it is not starting its cycle, read on to see what can be done.
If your GE dishwasher isn’t starting its cycle, it could be for a variety of different reasons: check to ensure that power is present within the appliance, be sure that the door has been closed tightly and is latched, and confirm that the ‘Delay Start’ button has not been pushed and engaged.
GE Dishwasher Won’t Start But Has Power
When your GE dishwasher won’t start, it can be so incredibly frustrating to deduce what exactly is going on, however, when you notice that the appliance doesn’t have power, the solution is rather simple. What, then, do you do if you know that your GE dishwasher has power, but it still won’t start? If your GE dishwasher has power but it won’t start, read on below to see what might be the cause of your problem and what you can do to get your dishwasher working again.
If your GE dishwasher won’t start but has power and you have confirmed that the door is closed and latched, it could be that the start switch is the issue. To check and see if it is working properly, you can use a multimeter to test the switch and if it is not working, it will need to be replaced.
GE Dishwasher Not Starting Locked
Before you start the cycle with your GE dishwasher, you will close the door so that the latch locks and the cycle can begin. However, if you have a GE dishwasher and are trying to get it to start but it will not and the door is locked, you may feel a bit stuck. If this is the case for you, continue reading below to see how you can get the door to unlock and get the cycle started.
If your GE dishwasher is not starting and is locked, it could be that the appliance has gone into lock mode. To get the appliance out of lock mode, press the ‘No Heat Dry’ button for four seconds which should cause the dishwasher to unlock and allow you to start a cycle.
GE Dishwasher Not Starting No Power
If you find yourself loading the last big of a full load of dishes into your GE dishwasher, but go to start the appliance and realize that no power is present, you have a slew of dishes to get cleaned with an appliance that simply cannot do so. Having no power is the recipe for failure when it comes to dishwashers, but this is something that can be easily resolved.
If your GE dishwasher isn’t starting and has no power, check your breaker box to see if the switch which controls the area has been flipped. If it has, kick the switch back on and see if power is present within the dishwasher. Also, check that the dishwasher is plugged in properly to receive power.
GE Dishwasher Will Not Start After Power Outage
Power outages are noticeable when it comes to the function of your utilities and big appliances such as the refrigerator, but many people forget how they affect smaller appliances such as dishwashers. If you have a GE dishwasher and it will not start after a power outage, you might be thinking that the outage fried your appliance, but fear not. If this is what you are experiencing, take a look below to see how you can restore the function of your dishwasher.
If your GE dishwasher won’t start after a power outage, try resetting the appliance. To do this, press and hold down the ‘Start/Reset’ button on the dishwasher for two minutes. Once this time has passed, you should be able to start the dishwasher and have full function once again.
To reset your GE Dishwasher you can follow the instructions on how to reset your GE dishwasher
If your GE dishwasher isn’t starting, ensure that the ‘Delay Start’ button has not been turned on, check that the door is latching if you are experiencing issues with the door sensor, use a multimeter to see if the start switch is working, and disable the lock mode function if enabled.
Related Articles
GE Dishwasher Light Blinking/Flashing
Copyright protected content owner: ReadyToDIY.com and was initially posted on December 8, 2021.
GE Dishwasher Won’t Heat/Won’t Heat Up Water
GE Dishwasher Door Won’t Stay Open/Close/Sense Door Is Closed
GE Dishwasher Not Cleaning Dishes/Glasses/Top/Bottom Rack
GE Dishwasher Various Locking Problem
Copyright article owner is ReadyToDiy.com for this article. This post was first published on December 8, 2021.
Troubleshoot GE Dishwasher Beeping
GE Dishwasher Noise Troubleshooting (What to Do)
GE Dishwasher Not Filling With Water (How to Fix)
GE Dishwasher Fills But Does Not Wash (How To Fix)
GE Dishwasher Door Won’t Open (Easy Fix)
GE Dishwasher Door Won’t Close (How To Fix)
GE Dishwasher Top Rack Falls Off (How to Fix)
GE Dishwasher Top Rack Falling Off Track (How to Fix)
GE Dishwasher Keeps Stopping (How To Fix)
ReadyToDIY is the owner of this article. This post was published on December 8, 2021.