Skip to Content

How To Connect LG Soundbar To Sharp/Panasonic TV

Sharp and Panasonic TVs are very popular devices. An LG soundbar can be used to enhance your viewing pleasure by improving the sound. How can you connect the devices to each other?

An easy way to connect an LG soundbar with a sharp or Panasonic TV is through HDMI. Use the HDMI ARC port on the TV to get the best results. You can run the cable from that port to the back of the soundbar and plug it in.

Black soundbar below the flatscreen tv

Since sharp and Panasonic make high-quality televisions, there is not generally a difficulty in getting things set up properly. It is usually just a matter of connecting the two devices and allowing them to automatically work with each other.

HDMI is probably one of the easiest ways to do this but it is not necessarily the most convenient. Many people find that Bluetooth is the best option because it allows the devices to be connected to each other without using any wires.

That being said, you may still have some difficulties connecting the devices through Bluetooth because you have to run through more of a setup process. Using a cable, such as an HDMI or optical cable is usually hassle-free.

How To Connect LG Soundbar To Sharp/Panasonic TV

At times, you may have difficulty when trying to connect an LG soundbar with a Sharp or Panasonic TV. This is to be expected, but is it a hurdle that you are unable to overcome?

Here are some common problems and how to overcome them:

Not Connecting Wired – If you are using an HDMI or optical cable to connect the LG soundbar to a television, you may have a problem connecting from time to time. What are some of the issues that can keep the soundbar from connecting?

1. Old Cable – Perhaps one of the most common reasons why an LG soundbar does not connect with a TV through HDMI is because the cable is old. HDMI has upgraded over the years so you must use the latest technology or you will not get the proper signal.

The same may also be true of an optical cable. Even if the technology is up-to-date, if the cable is old, it may not be working properly.

2. Ports – There may be problems with the port from time to time when you are plugging in the cable. On the back of a Sharp and Panasonic TV, you may find many different HDMI ports so try more of them if necessary.

Of course, it is always best if you use the HDMI ARC port because it allows the signal to travel in both directions, resulting in a better sound. It may still work in another HDMI port if that is the only option you have.

If the port is dirty or dusty, it may not send the signal properly. This can be corrected by blowing out the port with some compressed air and then using a Q-tip dipped in rubbing alcohol to clean the port. It doesn’t need to be done very often but if necessary, it can work wonders.

Finally, make sure that the cables are plugged in properly. They have to be seated fully into the port in order to work, otherwise, the signal will not send. You may find that an older cable is no longer able to connect properly. Replace it if necessary.

3. Dirty or Damaged Cables – You might find that at times, cables become damaged. As you move around devices, they can become pinched or bent, and eventually, they may break.

In addition, if you haven’t cleaned the cables behind the TV in a long time, it’s a good idea to do it. Carefully dust the cables and remove any grease or grime that is on them. When those items are on the outside of the cable, it can make a difference in the transmission of data.

Not Connecting Wireless – There may be a variety of different problems that can keep your LG soundbar from connecting to either a Panasonic or Sharp TV wirelessly. Here are a few to consider.

1. Distance – In order for Bluetooth devices to connect to each other, they have to be within 30 feet of each other. It is always best if you move the LG soundbar in close proximity to the Panasonic or Sharp TV before you connect them through Bluetooth. It will make it a lot easier to do.

2. Obstacles – The effective range of Bluetooth can also be reduced if there are obstacles between the devices. Make sure that the devices have a direct line of sight with each other and are in close proximity so the TV will connect with the soundbar properly.

3. Connections – In order to connect a Sharp or Panasonic TV with an LG soundbar, there cannot be any other active Bluetooth connections. If there are any connections active, such as to headphones or other speakers, make sure they are disconnected before you try to connect the soundbar.

Copyright protected content owner: ReadyToDIY.com and was initially posted on 2022-10-30.

4. Restart – Finally, there may be times when you just need to restart the device so the Bluetooth will work. Try unplugging the TV and the soundbar for a few minutes. Plug in the TV and fully restart it. Now plug in the soundbar. The Bluetooth should connect at this point.

Let’s take a look at some of the specific ways to connect these devices. We will look into whether it is possible to connect them and how to do it properly.

Can You Connect LG Soundbar To Panasonic TV Using HDMI?

Black soundbar below the flatscreen tv

HDMI can be used for connecting an LG soundbar to a Panasonic TV. After connecting the cable to both ports, it should begin sending a signal and the sound should begin working automatically.

The HDMI ARC output port should be the preferred port for the Panasonic TV. ARC is a technology that allows the signal to be sent in two directions and it will result in a better-sounding experience.

Make sure the HDMI cables are plugged in securely and you are using a clean, quality cable for this purpose.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on 2022-10-30.

Can You Connect LG Soundbar To Panasonic TV Using Bluetooth?

Black soundbar below the flatscreen tv

Bluetooth can be used for connecting an LG soundbar to a Panasonic TV. It’s a good way to enjoy the experience of using your LG soundbar without wires.

To connect to the LG soundbar with the Panasonic TV using Bluetooth, you will have to first put the soundbar in discoverable mode. Press the Bluetooth button on the soundbar to do so.

You can then navigate through the settings on the Panasonic TV to connect with the soundbar. If you are having problems, move them closer together and restart the devices if necessary.

Can You Connect LG Soundbar To Panasonic TV Using Optical Cable?

Black soundbar below the flatscreen tv

You can connect an LG soundbar to a Panasonic TV using an optical cable. It’s a convenient way to connect these two devices and have them working in no time.

The optical cable is a straightforward cable that can be plugged into the optical out port on the Panasonic TV and the optical port on the LG soundbar.

You may need to select the optical port in the settings of the LG soundbar to get it to work properly.

Can You Connect LG Soundbar To Sharp TV Using HDMI?

Black soundbar below the flatscreen tv

HDMI is an easy way to connect a sharp TV with an LG soundbar. Connect the HDMI cable securely into the HDMI ARC port on the TV and the HDMI port on the soundbar.

As long as you are using a good cable and have things plugged in securely, you should not have any problems. If you are having a difficult time connecting, unplug the Sharp TV and LG soundbar for a few minutes and then plug them back in again.

Can You Connect LG Soundbar To Sharp TV Using Bluetooth?

Black soundbar below the flatscreen tv

Bluetooth can be used for connecting an LG soundbar to a Sharp TV. Enable Bluetooth pairing on the soundbar by pressing the Bluetooth button. You can then navigate through the Sharp TV settings and select the soundbar in the list.

Can You Connect LG Soundbar To Sharp TV Using Optical Cable?

Black soundbar below the flatscreen tv

An optical cable can be used for connecting an LG soundbar to a Sharp TV. Use the optical out port on the sharp TV and connect the other end of the cable to the LG soundbar. Use the settings on the soundbar control panel to select the optical port.

ReadyToDIY is the owner of this article. This post was published on 2022-10-30.

You can use either HDMI or Bluetooth to easily connect an LG soundbar with a sharp or Panasonic TV. The HDMI can be plugged in using the HDMI ARC port on the television. Bluetooth can be paired automatically for a wireless experience.