HP tablets are very reliable but even they can experience problems connecting to Wi-Fi at times. What can you do to fix this problem?
1. Turn off Airplane Mode – It is not difficult for your HP tablet to get on airplane mode accidentally. It only takes a single push of a button or a swipe on the screen and suddenly, the Wi-Fi goes away.
It is always best if you check airplane mode first when you’re having a problem with your HP tablet connecting to the Internet. If airplane mode is turned on, you can easily turn it off.
If you continue to have problems where airplane mode is turning on, make sure there isn’t some type of shortcut or that one of the apps is not doing this automatically.
2. System Restore – Sometimes, something is updated on the HP tablet and it happens automatically in the background. This could be an update to the software that runs the tablet or to one of the apps that you downloaded.
To do a system restore, disconnect anything that is connected to the HP tablet. You should then power down the HP tablet to begin.
Press and hold the power button along with the volume rocker button. You will have to try both volume up and volume down because it may be one or the other. Once you boot up into the boot loader menu, use the volume button to select recovery kernel.
Continue to work your way through the process, using the volume rocker switch to select the appropriate option and then the power button to confirm. Eventually, your HP tablet will reboot and once it restarts, everything will be wiped out.
Reestablish your Wi-Fi connections at this point to see if they are working.
HP Tablet Not Connecting to Wi-Fi (How To Fix)
We rely on our Wi-Fi to keep us connected. We probably use it more often than we realize but we don’t often think about it unless the Wi-Fi stops working. What can you do if it is no longer connecting to your tablet?
The first thing you should do when you have a problem with the Wi-Fi connection is to restart the tablet. This can be done by going through the settings or by pressing and holding the power button until it automatically restarts.
Restarting the tablet is going to refresh the settings and the signal. If you are close enough to the Wi-Fi and everything is going well, it should solve the problem quickly and easily.
There may also be other reasons why you can’t connect to the Wi-Fi. We will discuss these in detail below.
Not only are we going to cover the most common solutions for all tablets, we will also look into the solutions that may be specific to certain tablets. In either case, it should solve the problem before you are finished reading.
6 Other Things To Try To Fix Your HP Tablet Wi-Fi
It can be frustrating when we are not able to connect to Wi-Fi with our tablet. There may actually be a number of problems, but here are a few to consider.
1. The Tablet Needs To Be Rebooted
Small errors can occur on the tablet that would eventually interfere with the Wi-Fi. These same errors may also cause other problems on the tablet that would eventually build up over time. In either case, the solution is the same.
Sometimes, the easiest way to fix a problem with a tablet not connecting to the Wi-Fi is to turn the tablet off and back on again. It may sound simplistic, but it works in almost every case because it refreshes the settings and allows things to go smoothly again.
If the tablet is frozen, you may need to hold down the power button and the volume down button at the same time for up to 30 seconds. Sometimes, you may just push the power button for 30 seconds. Once the tablet starts restarting, allow it to finish and then check the Wi-Fi again.
2. Wi-Fi Has Been Turned Off On Your Device
In order for the Wi-Fi to work on any device, it needs to be able to speak to the router. As long as the Wi-Fi is working at the router, it is putting out a continuous signal and will connect with any known device once it is in range.
The problem is, it is possible to turn the Wi-Fi off on a tablet or any other electronic device. If that is the case, it will not be looking for any Wi-Fi signal in the area and it will not connect, no matter how close you are.
Slide down the menu from the top of the screen and check the Wi-Fi option. If it has been turned off, simply tap the Wi-Fi to turn it back on again. Otherwise, long press the Wi-Fi and then turn the slider bar on in the screen that pops up.
3. Wi-Fi Has Been Disconnected At The Router
If you are having difficulty getting the Wi-Fi to connect to your tablet, you may want to check other devices in the home. It may not be a problem with the tablet, it could be a problem with the Wi-Fi.
If no device, including computers, phones, or Roku devices are connecting to the Internet, then the problem is likely with your Internet. The easiest way to fix the problem is to turn the Internet off and back on again.
Unplug the modem and router and disconnect all cables between them. Leave them disconnected for 60 seconds and then plug them back in again. After they cycle on, the problem should be fixed.
4. You Have A Tablet Case That Is Blocking Signal
If you have a brand-new case for your tablet, it may be the problem that is keeping your tablet from connecting to Wi-Fi. Some cases present interference in that way.
In almost every case, the Wi-Fi will be able to connect if you are close enough to the source of the signal, the router. If you have a new case and it is blocking the cycle, it may not be possible to get as far away from it as possible earlier.
Remove the case, restart the tablet and try to connect to the Wi-Fi again.
5. You Have Moved To An Area Where The Signal Is Weak
If you are in a part of your home and the signal is weak, you may not be able to connect to the Wi-Fi. This could be due to anything from a microwave oven to medical equipment that is operating in the area.
Copyright protected content owner: ReadyToDIY.com and was initially posted on January 21, 2023.
Move as close as possible to the Internet modem and router setup. This should show if you are actually connecting to the Wi-Fi or if it is disconnected altogether.
Stay within range of the Wi-Fi if it is a problem. Otherwise, you may be able to get a booster that can improve the signal and allow you to get further away from the router.
6. There Is Interference In The Area
Finally, interference can cause difficulty with connecting to the Wi-Fi. We tend to think of interference as being something electronic but actually, anything can provide interference.
If you move into another room, you have a wall between yourself and the Wi-Fi signal. If there is something else between you and the signal, from a refrigerator to a hot water heater, it can also provide interference that keeps the signal from getting to you.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on January 21, 2023.
The easiest way to test this is to move as close as possible to the Wi-Fi source. If you are able to connect without any problem, then you have found the issue and should move on from there.
Related Articles
HP Tablet Won’t Turn On (How To Fix)
How to Fix HP Tablet Not Charging
HP Tablet Keyboard Not Working (How to Fix)
ReadyToDIY is the owner of this article. This post was published on January 21, 2023.