Skip to Content

RCA Tablet Won’t Turn On (How To Fix)

Do you have a problem with your RCA tablet? This doesn’t happen very often but when it does, you want to get it fixed as quickly as possible. A number of options may be available but sometimes, it comes down to the charge.

The most common reason why an RCA tablet won’t turn on is that it is not charged properly. This could be due to a faulty battery, a faulty charger, or perhaps you just didn’t get it plugged in properly the last time you charged it. Plug the tablet in and make sure that the charge light is illuminated. After waiting 15 minutes, try to start the tablet by pushing the power button.

Tablet PCs front and back views

If you call customer support with a tablet that has frozen, they will often ask about the battery first but they may also ask you to perform a power cycle. This is something that may happen with almost everything, from a major appliance to a smartphone.

To perform a power cycle, you will remove the battery from your RCA tablet. You will have to remove the back cover to access the battery. Do not charge your tablet during this process.

After the battery has been removed, press and hold the power button for a few moments. Doing so allows any residual energy in the tablet to fully drain. You can then replace the battery and try to start the tablet as you normally would.

Finally, inspect the tablet carefully for any physical damage. If it has recently been dropped, it may have jarred something loose on the inside, and eventually, the tablet could fail. This might also affect the ability of the tablet to start.

When your tablet won’t start, try power cycling first. This is done by removing the battery and pressing the power button. After you reinsert the battery, charge the tablet for at least 15 minutes and then try to restart it by pushing the power button. It should start cleanly.

This article and its contents are owned by Ready To DIY and was first published on 06/28/2022

Things To Try to Turn On Your RCA Tablet

Two hands holding tablet PC

We may have many tools that we use on a daily basis, including the electronic tools that we use. One of those is likely to be a tablet. It gives us the world at our fingertips but when they aren’t starting properly, it can be frustrating. What can be done to correct this issue?

If you have a problem with a tablet not starting, you can try cycling the power. This is done by opening the tablet, removing the battery, and holding the power button for several seconds. Doing so drains the residual energy. Replace the battery and hold the power button in for a few seconds while the tablet starts.

In many cases, you will be able to use a power cycle to restart a tablet quickly and easily. It is almost like hitting the reset button on an appliance.

At the same time, however, there are always going to be variations that exist from one tablet to another. It is impossible to cover every single scenario in the scope of a paragraph or two, which is why you may need to dig a little deeper.

In this article, we will consider some of the different ways that a tablet can be started when it is refusing to start up. We will also consider many specific models and manufacturers, some of which need a little extra help when the power button doesn’t seem to be working.

As an example, there are some tablets that are sealed and you won’t have access to the battery. Doing this type of hard reset will not work, but there may be other options that are available.

We will consider some of those top choices to try if you can’t get your tablet to turn on. You can then look for the model tablet you have if all else fails.

This article and its contents are owned by Ready To DIY and was first published on 06/28/2022

1. Power Cycle

One of the first and most important things to try when your tablet won’t start is to perform a power cycle. This is done by removing the battery from the device and pushing the power button for a few seconds to drain the power.

Make sure that you don’t have your device plugged in while you are doing a power cycle. After reinstalling the battery, the device should start normally. If not, try charging it for 15 minutes and starting it then.

2. Battery Problems

Sometimes, one of the issues that can lead to a device not starting is the battery has failed. Batteries have a limited lifespan and if you have noticed that you have had to charge the battery frequently, it may have reached the end of its life.

Batteries may sometimes also fail unexpectedly. If your device works while it is plugged in but not unplugged, it could be an issue with the battery. You can order replacement batteries online.

Copyright protected content owner: ReadyToDIY.com and was initially posted on 2022-06-28.

3. Charging Problems

If the battery is operating fine but it is still not turning on, it could be an issue with charging. Some tablets will not charge properly unless you use the appropriate charger. This would include the charger cable as well as the power brick.

Try using a different charger and if all possible, use the charger that came with the device.

4. Long Press the Power Button

When we experience problems with an app, we sometimes long-press the app and look at the options. Your tablet may have something built into it when it comes to long pressing the power button.

Press and hold the power button for up to 30 seconds to see if it starts. Sometimes, it is just that simple.

5. Boot into Safe Mode

Just like a Windows computer, Android devices also have a safe mode. It is hidden, so you will have to do some research online to find out how to access the safe mode on your specific device.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on 2022-06-28.

When your tablet boots into safe mode, it does so without many of the options that would bog the device down. From there, you can troubleshoot your tablet more easily.

6. Model Specific Options

Although we may be able to long-press the power button on some tablets, there may be specific options for other tablets. Some of those options are considered in the list in this article.

Some model-specific options can include pressing more than one button at a time. It may also include plugging in and unplugging the cable multiple times while pushing the power button. Check the Internet for your model and manufacturer.

7. Check for Physical Damage

Sometimes, a little bit of physical damage will go a long way toward harming your tablet and keeping it from starting. Carefully inspect the tablet for physical damage and evidence that it may have taken a fall.

8. Full Reset

At times the best option you have available is to fully restart your tablet. This is typically only done if nothing else is working. Restarting your tablet will erase the operating system as well as all of the data that has accumulated on your tablet as you are using it.

During a full reset, the operating system will be reestablished. You will likely have to update some of the settings after it is done and reestablish your logins, including your email.

Because of the possibility of having to occasionally perform a full reset, it’s a good idea to backup your important files regularly.

9. Erase New Apps

If you recently installed an app and notice that your tablet is no longer starting, you may need to erase that app. This can be done by booting into safe mode, long-pressing the app icon, and choosing delete.

10. Contact Customer Support

If all else fails, you may need to contact customer support. They may walk you through some of the options that we have already considered on this page but they may also have other options that are so product-specific that they could not be covered in a single guide.

11. Warranty

Always check the warranty to see if you can have the tablet or perhaps the battery replaced for free. Don’t expect customer service to research this for you, you have to do your own legwork.

ReadyToDIY is the owner of this article. This post was published on 2022-06-28.

Related Articles

How to Reset RCA Tablet