When it comes to dishwashers new and old, there are indicator lights that help to relay exactly what is going on or what is needed with the appliance. However, if you have a Samsung dishwasher and there are lights flashing for unknown reasons, what might they mean?
Flashing lights on a Samsung dishwasher could indicate a water leak, too much water within the dishwasher, that there is not ample water pressure, that the water temperature is too high, or that there are obstructions within the drain hose, sump, filter, or the drain itself.
The beauty of lights on appliances such as dishwashers is that owners no longer have to try and blindly deduce the issues that their device is experiencing. These light sequences are put in place to inform owners of problems the appliance has so that troubleshooting methods can be more informed and thus, more effective. If there are lights flashing on your Samsung dishwasher, read on to find out just what they mean and what you can do to stop them.
Samsung Dishwasher Light Flashing
There are multiple lights on a Samsung dishwasher that are there to not only indicate issues, but to show what is going on with the appliance so owners know the exact state the device is operating. However, when it comes to lights flashing, this can be a quick flag that something may not be quite right. If you are seeing lights flashing on your Samsung dishwasher and would like to know just what they mean, read on to see what various messages are being relayed.
Flashing lights on a Samsung dishwasher could indicate a water leak, too much water within the dishwasher, that there is not ample water pressure, that the water temperature is too high, or that there are obstructions within the drain hose, sump, filter, or the drain itself.
Samsung Dishwasher Normal Cycle Light Flashing
When it comes to washing various items, the normal cycle on a Samsung dishwasher is probably the most used cycle of them all, as this cycle is more for cleaning general items of everyday use rather than for very specific types of washes. The versatility that this cycle offers is one of the reasons users find themselves selecting the option for most washes, but what do you do if the normal cycle light is flashing for no apparent reason?
If the normal cycle light is flashing on a Samsung dishwasher, this is an indication that a leak sensor has detected water somewhere within the dishwasher that it should not be. You will then need to find the source of the moisture before the light will stop flashing.
If the normal cycle light is flashing on its own, you can be sure that the indicator message is that a leak sensor has detected moisture. However, if the normal cycle light is flashing with other buttons, this can mean a different message entirely. Be sure to pay close attention to other buttons blinking with the normal cycle light, as this could mean hot water is present, a button is stuck, or the thermostat has short-circuited.
Samsung Dishwasher Heavy Cycle Light Flashing
The heavy cycle is used for those loads that might have one too many dishes within them or is carrying items that need a more vigorous wash than what would normally be required. Of course, there are times when the dishwasher is forgotten and dishes pile up and before you know it, you have one on top of the next. The heavy cycle can break through food grime easily in such circumstances, but what do you do if this light is flashing?
If your Samsung dishwasher’s heavy light is flashing, this is an indication that there is too much water within the dishwasher. This may be an obvious presence of water, or there could be a leak. Either way, the leak and water will need to be fixed and removed to stop the flashing.
When the heavy cycle light is flashing, you should first check that the connection is secure to the dishwasher at the sink. If this can be confirmed, look for any issues at the drain hose by filling the sink with water and seeing if any escapes. If this is not a problem, be sure to clean the sump, the filter, and the tub within the dishwasher and ensure that there is no food debris preventing any of these areas from draining properly.
Samsung Dishwasher Smart Auto Light Flashing
If you have a smart auto feature on your Samsung dishwasher, this is one of those features that everyone without one ends up wanting themselves due to its usefulness. The smart auto feature is a cycle that gauges how solid the items in the dishwasher are and then implements the proper cycle for this level without any action from owners. If you see that the smart auto light is flashing though, what does this mean?
If the smart auto light is flashing on your Samsung dishwasher, this is an indication that the water pressure or water temperature is not as it should be for the cycle being implemented. Confirm the temperature of the water and check that water is flowing properly to the appliance.
When it comes to the water temperature, the most likely cause of the temperature being off is the water heater. Check that the water temperature has been turned up or down to an appropriate level and once this has been done, allow a few moments for the water to reach desired temperature. For water flow, if other water-ran appliances are running or the shower or sink is running, turn them off during the dishwashers cycle.
Samsung Delicate Light Flashing
If you have finally decided to take out your wedding china for a Christmas dinner or to show off to special guests, you might be wondering just how these can be washed to ensure no damage is done to the surface of some of your most precious items. The delicate cycle is made just for this as well as other items that need a gentler wash to keep them from chipping or scraping. If you see that the delicate light is blinking on your Samsung dishwasher, read on.
If the delicate light is blinking on your Samsung dishwasher, this is an indication that the dishwasher cannot drain properly. Confirm that the drain hose is draining properly and ensure that there are no obstructions within the drain, the sump, or the filter of the dishwasher.
You may need to remove some pieces of the dishwasher when inspecting the lower areas of the appliance, as food items can easily get wedged deeply within these places. Be sure to clean the filter thoroughly as well as run water on it until you can see that the water is running straight through. If the filter is so dirty that water will not run through it, it should be replaced with a new filter to allow for the most optimal drainage.
Samsung Dishwasher Quick Light Flashing
If you are in a hurry and need a specific item watch or need a small load that is not overly soiled run through, the quick feature is one that gets the job done without needing the full cycle time. This is great for those moments where the dishwasher may be an unwanted background noise or there isn’t enough time to get the load done by hand while completing other tasks, but what does it mean if the quick light is flashing?
If the quick light is flashing on your Samsung dishwasher, this is an indication that the water pressure is not sufficient or that the temperature of the water is wrong. Check that ample pressure is being given to the appliance and that the water heater is turned to an appropriate temperature.
As previously noted, the water pressure is likely something that you can easily remedy by turning off any appliances, such as the washer, that are using water at the same time the dishwasher is being run. If your water pressure is not great to begin with, the use of a sink tap can be enough to take away the pressure the appliance needs, causing this light to blink until pressure is restored.
Samsung Dishwasher Lock Light Blinking
The lock light on a Samsung dishwasher is what indicates the door has been properly shut and thus, cycles can commence as they are inputted. When the door is closed, the lock light should be on, but the light display should be solid until the door comes back open, to which the light will turn off. If you have the door closed and the lock light is blinking, read below to see what might be the cause of this.
If your Samsung dishwasher light lock is blinking, be sure all traps are filled with the appropriate solutions, such as dishwasher salt. Once filled, clean all contact points on the dishwasher to ensure that it is closing properly, as incorrect closing will prevent the door from engaging.
Samsung Dishwasher Time Blinking
On a Samsung dishwasher, you have the option to set the time you wish the appliance to run, which is considered a delayed start. This allows owners to run the dishwasher when they are away from home or after a late night without having to worry about physically starting the cycle. The time will be displayed on the panel of your dishwasher so that you can choose when the cycle starts, but what do you do if the time is blinking?
If the time is blinking on your Samsung dishwasher, this is simply an indication that a selection has not been made. Be sure that you select the time you wish the dishwasher to start, otherwise, the light will continue blinking.
If you have a Samsung dishwasher and the time of day is displayed on the control panel, you will be working with a different problem if the time is blinking. For this problem, the most likely cause is that a power outage has occurred and the time now needs to be reset. Simply set the time to the appropriate hour and minute and the time should stop flashing.
Samsung Dishwasher Sanitize Blinking
There are dishwashing loads at times that barely have enough residue on them to be considered dirty, but then there are those loads that you hope your dishwasher can put up a good fight with due to the extreme mess left on their surfaces. The sanitize option is implemented for exactly this, as the temperature is increased in the final rinse cycle to melt away and left over grime before finishing up.
If your Samsung dishwasher sanitizes light is blinking, this is an indication that the water temperature was not high enough to complete this option. Be sure your water heater is turned up to the appropriate temperature, allow the water to heat, then run the sink on hot before restarting.
Samsung Dishwasher Express Blinking
Another fast setting option is the express cycle, but this cycle is typically found on newer models. Similar to the quick cycle on older Samsung dishwasher models, the express cycle is used for those loads that are only lightly soiled and need to be washed in a shorter amount of time. This cycle only takes about 60 seconds to complete, but if you notice that the express light is blinking, what could it mean?
If your Samsung dishwasher express light is blinking, this is an indication that the water pressure is not sufficient for the cycle. Be sure all other water-using appliances are not running and that other water sources are turned off as well, such as the sink or shower.
Flashing lights on a Samsung dishwasher could be an indication that a selection has not been made concerning the time, there is a leak present within the unit, the water temperature or water pressure are insufficient, too hot, or too cold, or complete the selection process.
Related Articles
Samsung Dishwasher Beeping Problem
Copyright protected content owner: ReadyToDIY.com and was initially posted on April 2, 2022.
Samsung Dishwasher Fills But Does Not Wash (How To Fix)
Samsung Dishwasher Top Rack Falls Off (How to Fix)
Samsung Dishwasher Not Working/Cleaning
Samsung Dishwasher Door Open/Close Problems
Samsung Dishwasher Not Turning On
Copyright article owner is ReadyToDiy.com for this article. This post was first published on April 2, 2022.
Samsung Dishwasher Does Not Drain
How to Reset Samsung Dishwasher
Samsung Dishwasher Making Loud Noise (How To Fix)
Samsung Dishwasher Keeps Stopping (How To Fix)
ReadyToDIY is the owner of this article. This post was published on April 2, 2022.