While porcelain tiles are beautiful, they can sometimes become stained and difficult to clean.
Here are some suggestions on how you can keep your porcelain tiles looking perfectly clean and shiny.
Polished porcelain tiles and unglazed porcelain tiles can be cleaned with the same solution. Take a gallon of hot water and throw in a ¼ cup of white wine vinegar. Stir the vinegar into the water and use a sponge to wipe away any dirt or grime. Rinse the tiles with clear water and dry with a towel.
Can You Use Vinegar to Clean Porcelain Tile?
Cleaning porcelain tiles is easier than you think. There’s no need for fancy cleaning solutions.
Yes, it is possible to clean your porcelain tiles with vinegar. After using a brush or broom to sweep away any dust or dirt, mix up a solution of white wine vinegar and hot water. Apply the water and vinegar solution with a sponge, rubbing away any marks. Rinse with clean water and dry with a towel.
Unpolished porcelain tiles are a little more delicate and cleaning them is slightly more difficult. You don’t want to stain them using harsh household cleaners.
Ideally, you should use a very lightweight, gentle commercial tile cleaner and mix about a ¼ cup into a bucket of hot water.
Then use a sponge or a mop to gently rub away any marks or dirt.
Once you have completely cleaned the tiles, rinse them with clean water until all traces of the cleaning solution are gone. Then use a soft towel to dry the porcelain tiles.
It is important that you do not use anything that will damage the tile. Avoid acidic or chlorine-based cleaners. These types of cleaners will discolor the porcelain tiles and ruin any patterns.
Also, any cleaners or detergents that have color will possibly tint the tile and ruin its finish.
Avoid using hard or metallic brushes to brush away dirt or scrub marks. They will scratch the tiles and ruin the finish.
Can You Use Baking Soda to Clean Porcelain Tile?
If you are looking for an eco-friendly way to clean your porcelain tiles, then vinegar and baking soda are two of the best ingredients to use.
Combining vinegar and baking soda creates an excellent cleaning solution that is gentle on porcelain tiles. Vinegar is acidic, while baking soda is a base. The two ingredients react and produce a cleaning agent that will effectively get marks and grime. It also gets rid of odors and stains.
To use vinegar and baking soda to clean your porcelain tiles, follow these steps:
- Get rid of any dirt or debris by brushing it away.
- For finer dirt, use a vacuum cleaner to suck up the last of the dirt.
- Add a 1/4 cup of white wine vinegar to a gallon of hot water. Stir it thoroughly.
- Make a thick paste by adding a ½ cup of baking soda to a cup of water. Once the solution is mixed, dip a brush or sponge into the paste and smear it onto the areas of tile that are particularly dirty.
- Using only soft brushes, scrub any stubborn stains with the vinegar and water mixture. The paste will froth and lift any dirt on your tiles.
- Mop the entire tiled area with the vinegar solution, allowing the froth to stand a little in any particularly dirty areas.
- Then rinse the porcelain tiles off with clean water.
- Finally, dry the tiles with a soft towel or cloth.
- If you want your tiles to shine, you can buff them once the floor is totally dry using cheesecloth.
Can You Use Bleach to Clean Porcelain Tile?
Porcelain tiles and the grouting used between them can stain with the use of harsh cleaning materials. It is best to only use water and vinegar or a very dilute commercial cleaner.
It is never a good idea to clean porcelain tiles with bleach or any acidic cleaning product. It is best to sweep the tiles with a soft brush and vacuum any finer dust. Then use vinegar and hot water to clean any marks off the tiles. When they’re clean, rinse with fresh water and dry with a towel.
When cleaning your porcelain tiles, only use soft cloths, sponges, and brushes. Never use wire brushes or harsh chemicals. These will scratch and stain the tiles, leaving them ruined.
This article and its contents are owned by Ready To DIY and was first published on 07/10/2022.
Rather, use a bucket of hot water and vinegar solution to gently clean the tiles before drying them with a soft towel or cloth.
Can You Use Dawn/Dish Soap to Clean Porcelain Tile?
While it is not recommended that you use anything other than vinegar and water to clean your porcelain tiles, there are one or two other chemicals that you can use to make the job easier.
You can use a drop of dish soap or Dawn to clean your porcelain tiles. Fill a bucket with a gallon of hot water and add a drop or two of dish soap. Using a sponge, or soft mop, wipe the porcelain tiles clean. Rinse the tiles with fresh water and then dry the tiles with a soft cloth or towel.
For the best results, make sure that the floor is regularly brushed and vacuumed so that there is no dust or dirt left on the floor.
Once a month, fill a bucket with hot water and add a drop of dish soap. Then use a mop to wash the porcelain tiles. Avoid using a brush that will scratch the surface.
Once the floor is clean, rinse the tiles with clean water and wipe them dry with a cloth or soft towel.
Can You Use Acetone to Clean Porcelain Tile?
Porcelain tiles stain easily and it is not recommended that you use anything other than a very gentle cleaning solution.
Acetone is a very strong chemical that can stain porcelain and the grouting in between the tiles. It is therefore not a good idea to use acetone to clean your porcelain tiles. Rather, use a gentle commercial cleaner that is heavily diluted at least 10 to 1 or a vinegar and water solution.
The most effective porcelain tile cleaner is a water and vinegar solution, but if you need something stronger, then try some baking soda on the especially difficult-to-remove marks and dirt.
Can You Use Ammonia to Clean Porcelain Tile?
There are many different ideas on how to clean porcelain tile.
Unfortunately, there are only one or two cleaners that work without marking the surface of the tile.
Any alkaline or harsh cleaners should be avoided when cleaning porcelain tile. Ammonia is one of the harshest household cleaners, and you should avoid using it to clean porcelain tiles, especially unglazed porcelain tiles. It is best to use a water and vinegar solution to clean your porcelain tiles.
This article and its contents are owned by Ready To DIY and was first published on 07/10/2022.
Can You Use Fabuloso to Clean Porcelain Tile?
Some household cleaners can be used in very diluted form to clean porcelain tiles.
If you’re cleaning glazed porcelain tiles, then you can use a diluted solution of Fabuloso and water to clean your porcelain tiles. Using a sponge or soft mop, clean the ties with a solution that is made up of a drop of Fabuloso and a gallon of hot water. Don’t use it on unglazed porcelain tiles.
Can You Use Karndean to Clean Porcelain Tile?
When cleaning your porcelain tiles, you need to make sure that the floor cleaner will not make any marks or stains on your tiles.
It is not recommended that you use Karndean to clean your porcelain tiles as it contains a coloring agent that can stain the unglazed porcelain tiles and the grouting between them. It is far better that you use hot water and vinegar to avoid the chances of ruining your tiles.
Can You Use Kerosene to Clean Porcelain Tile?
Cleaning any floor with a combustible liquid is not a good idea, especially if it leaves a residue behind.
Using kerosene to clean your porcelain tiles is not recommended as it can stain the surface of the tiles and leave an oily residue behind. It is far better to wash the porcelain tiles with a vinegar and water solution or use baking soda for particularly harsh marks.
Can You Use Koh to Clean Porcelain Tile?
With so many cleaning products on the market, it is difficult to know whether it is safe to use them on your floor tiles.
Koh is a general-purpose cleaner that contains waxes and other cleaning agents that can stain porcelain tiles. It is recommended that you avoid using Koh on your porcelain tiles and rather just use water and vinegar for the cleanest, streak-free shine. When dry, buff the tiles with a soft cloth.
Can You Use Methylated Spirits to Clean Porcelain Tile?
Methylated spirit is an excellent cleaner, but it is not recommended for porcelain tiles.
While methylated spirits will evaporate very quickly, they can stain your unglazed porcelain tiles. Glazed porcelain tiles should be fine with a mixture of water and methylated spirits as they will evaporate and not leave streaks or marks.
Can You Use Muriatic Acid to Clean Porcelain Tile?
It is recommended that you not use any harsh cleaners on porcelain tiles, as it can ruin the finish.
Copyright protected content owner: ReadyToDIY.com and was initially posted on July 10, 2022.
Strong acids and alkaline cleaners will stain porcelain tiles. Their use isn’t recommended, so it is not a good idea to use muriatic acid to clean porcelain tiles. A better solution is to use white wine vinegar and hot water and use a sponge to wipe the tiles before rinsing with clean water.
Can You Use Pine Sol to Clean Porcelain Tile?
Any strongly scented or colored floor cleaner is not a good idea to use on porcelain tiles.
Porcelain tiles are easy to stain if you use a floor cleaner with a colorant in them. Pine-sol is not a good option when cleaning porcelain tiles as it is both scented and colored. These ingredients can stain the porcelain tiles and ruin the finish.
Can You Use Rubbing Alcohol to Clean Porcelain Tile?
It is common knowledge that harsh cleaners can damage porcelain tiles and the grout between them.
It is not recommended that you use rubbing alcohol to clean porcelain tiles. Alcohol can stain the tiles and, because it evaporates so quickly, it is very difficult to remove the stain once it has set in the tile or the grouting. It is better to use vinegar and water to clean porcelain tiles.
Can You Use Steam Mop to Clean Porcelain Tile?
Cleaning porcelain tiles with water or a mixture of water and vinegar is the best choice.
The use of a steam mop to clean porcelain tiles is an option so long as the tiles are glazed. Cleaning unglazed porcelain tiles with a steam mop may cause stains or discoloration in the designs or patterns. Cleaning unglazed tiles is best done with warm water and a drop of vinegar.
Can You Use Windex to Clean Porcelain Tile?
There are many proprietary cleaners that suggest that they can be used to clean porcelain tiles.
It is generally recommended that you not use Windex to clean porcelain tiles as it leaves a greasy residue and can stain the tiles. It is better to stick with a water and vinegar mixture to avoid streaks and other marks. Rubbing the tiles down with a soft cloth sponge will remove most of the dirt.
This article and its contents are owned by Ready To DIY and was first published on 07/10/2022.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on July 10, 2022.
Can You Use Zesty to Clean Porcelain Tile?
While Zesty is a well known and trusted eco-friendly cleaning agent, it may not be the best choice when it comes to cleaning porcelain tiles.
Zesty cleaner has a few natural oils and ingredients that can stain unglazed porcelain tiles. For this reason, it is not recommended as a suitable cleaner for use on porcelain tiles. A better option would be to use hot water and vinegar on a soft sponge. It can be rinsed with clean water afterward.
Can You Use Zinc Oxide to Clean Porcelain Tile?
There are a few unusual cleaning materials that have a multitude of other uses, both medicinal and for cleaning and disinfecting.
Zinc oxide is not suitable for cleaning porcelain tiles as it can stain the tiles and the grout. It contains a bleaching agent that can cause stains to form on the tiles which will ruin their appeal. It is better to stick water and vinegar to clean off the tiles.
Can You Use Zoom Mighty Boss Cleaner to Clean Porcelain Tile?
Harsh cleaning products are more likely to stain or mark porcelain tiles.
Zoom mighty boss is not a suitable cleaner for use on porcelain tiles. It contains harsh acid compounds that can stain porcelain tiles and ruin the designs on unglazed tiles. Rather than using a harsh cleaner, hot water and vinegar are usually enough to get the porcelain clean again.
What to Look Out For While Cleaning Porcelain Tile
Porcelain tiles are easily damaged.
One should never use a cleaning product that has ammonia or bleach as an ingredient when cleaning porcelain tiles. You also do not want to use a hard or metal brush on porcelain tiles as it will scratch the surface. Avoid oil and wax-based cleaners or those with a colorant as they stain easily.
How to Clean Porcelain Tile Properly
There is a time-honored way to clean porcelain tiles.
Porcelain tiles should be cleaned with a solution of water and white wine vinegar. Once the tiles are washed down, the tiles must be rinsed with clean water and then dried with a cloth or soft towel. Glazed tiles can be buffed when they are dry by using cheesecloth or a soft cloth.
This article and its contents are owned by Ready To DIY and was first published on 07/10/2022.
Related Articles
Can You Remove Stains From Shower? (How-to)
Can You Remove Ink from Porcelain? (How To)
Can You Remove Paint From Porcelain? (How To)
Can You Remove Stains From Mattress? (How To)
ReadyToDIY is the owner of this article. This post was published on July 10, 2022.