We have many different options when it comes to the walls in our home but perhaps none of them are quite as convenient as pegboard. We can use it to design a room or to keep our tools handy and within arm’s reach. If you are installing a pegboard, what can be used to cut it?
The best way to cut a pegboard is to use a fine tooth blade on either a circular saw or jigsaw. Circular saws can be used to cut long, straight lines, and jigsaws can be used for cutting odd shapes and circles.
Once you have the pegboard in place, you will likely want to maximize it’s potential. Cutting it properly will help you to get as much on the wall as you can and then you can take it from there.
What Can You Use To Cut Pegboard? (How To)
In this article, we are going to discuss cutting some of the more common types of pegboards. They are made out of some type of wood, either composite wood or perhaps plywood.
As a result, it may be difficult to cut a pegboard using some types of tools that are not necessarily going to provide the strength needed to get the whole way through. As you will see, however, there are some options for scoring and snapping as well.
Some special types of pegboards are also made from material that is not easily cut in the same way as particleboard or plywood. This includes plastic pegboards and those that are made out of metal. Obviously, they would require their own tools to get the job done.
Of course, you would want to pay attention to your personal safety when cutting pegboard, regardless of the tool that you are using. Always pay close attention to your hands and other body parts so they don’t get in the way of the saw blade.
Wearing the proper PPE is also important, including safety glasses, all-purpose gloves, and hearing protection if you are using a loud saw.
Take your time and allow the saw to do most of the work for you. Make sure that all of the guards are in place and you will have your pegboard cut in no time and begin enjoying it without injury.
Let’s take a look at some of the different types of tools that can be used to cut pegboards. Some of these may also not be the best tools for the job.
Can You Use Utility Knife To Cut Pegboard?
You can cut through a pegboard using a utility knife but it is not going to be the best option. You would use a straight edge and cut with the utility knife to score the pegboard on both sides. Afterward, you would snap the board on the edge of the table.
The problem with using a utility knife is the fact that it will leave behind a jagged or rough edge. If you need a clean edge, use a circular saw or jigsaw.
Can You Use Circular Saw To Cut Pegboard?
A circular saw equipped with a fine tooth wood cutting blade is the best choice for cutting long, straight cuts in a pegboard. In fact, you can use a circular saw for cutting pegboard that is made of plastic, as well as metal if you use the proper blade.
Don’t try to use your circular saw for cutting odd shapes or making turns as you cut. A jigsaw should be used for that purpose or at the very least, a hacksaw equipped with the proper blade.
Can You Use Hand Saw To Cut Pegboard?
If you need to cut a pegboard, you can do so using a handsaw. It’s a great way to cut through the board and get the job done without having to rely on a circular saw or jigsaw.
Although we would recommend using a handsaw, it is always best if you use one that is for cutting wood. In addition, it should only be considered for smaller jobs because of the time that is involved.
A handsaw will cut through a pegboard but it will leave behind a rough edge compared to what you would get with a circular saw or jigsaw.
Can You Use a Jigsaw To Cut a Pegboard?
Using a jigsaw with a fine tooth blade is an excellent way to cut a pegboard. You can use it for cutting smooth, steady curves or odd shapes. A jigsaw can also be used for cutting straight cuts but it is best if you use a guide to keep you on track.
Copyright protected content owner: ReadyToDIY.com and was initially posted on September 20, 2022.
If you have to cut a piece out of the pegboard, you can use a jigsaw to do so. Simply drill down through the pegboard so you can insert the blade and then cut the area out cleanly.
Can You Use a Laser To Cut Pegboard?
It is possible to use a laser to cut through a pegboard but it is not the best choice for most homeowners. If you need to have a very accurate cut and you have access to a laser, however, you can use it for cutting through the board cleanly.
It is also possible to use a laser for engraving the pegboard if desired. This is not typically something that is done, but it is something to keep in mind.
Can You Use Box Cutter To Cut Pegboard?
A box cutter can be used for cutting pegboard but it is not the best tool for the job. If you need to use a box cutter, score the pegboard on both sides using a straight edge to keep you on track. You can then snap the pegboard at that line.
One of the biggest problems with using a box cutter is the rough edge that is left behind. In addition, a box cutter is not as strong as a utility knife, so there is a greater potential for injury.
Can You Use Table Saw To Cut Pegboard?
If you have a table saw and need to make a long, straight cut on a pegboard, it’s an excellent choice. It makes short work of the project and leaves behind a clean, straight edge that is going to look good once it is installed.
Can You Use a Razor To Cut a Pegboard?
A razor blade can be used to cut pegboard by scoring the front and the back. You can then snap the pegboard at that line, which has become the weakest point. Razor blades are not the safest or most convenient choice for cutting pegboard.
Can You Use a Dremel Tool To Cut Pegboard?
If you have a Dremel tool equipped with the proper blade, you can use it for cutting through pegboard. The Dremel tool is especially good for cutting odd shapes and small cuts in out-of-the-way areas.
How To Cut Pegboard (Best Way)
Cutting a pegboard is very similar to cutting any piece of wood, such as plywood or particleboard. That being said, there are some right and wrong methods to consider.
Before we discuss the best way to cut a pegboard, it’s important to recognize that options are always available. Sometimes, you may find that using a handsaw or utility knife is a good choice.
Although those tools can certainly cut through pegboard, they are not going to provide you with the cleanest edge. They are better suited for cuts that are hidden along the wall or perhaps behind a cabinet.
Take the following steps to cut through pegboard properly:
1. Measure – Perhaps the most important factor for cutting a pegboard is to measure it properly. This would include both the width and the length of the pegboard. You may adjust the area of the pegboard that is cut to provide the maximum number of holes that are available. You also would not want to have holes cut in the middle if you are piecing two pegboards together.
For the most part, you will use a pencil to mark the pegboard. It is best to use a carpenter’s pencil. When cutting, you will cut the line so that the pencil mark disappears completely. Keep this in mind when doing your measurements, especially if you are in a very tight spot.
2. Stabilize – Make sure that you always stabilize the pegboard on a workbench before doing the cut. You can also use sawhorses for larger pieces of pegboard if you are cutting it with a circular saw or jigsaw.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on September 20, 2022.
Obviously, if the area that you are using to make the cut is not stable, it can cause some serious safety issues. Always stabilize the pegboard and make sure of what is under it before making the cut.
3. Blade Selection – For most purposes, you will be using a circular saw or jigsaw to cut through the pegboard. You should choose a blade that has fine teeth and is suited for cutting through wood.
This is important because you want to have a nice, clean edge after the cut is made. Choosing a blade that has coarse teeth or one that was made for another purpose is not going to produce the best result.
4. Cutting – Now is the part where you will cut through the pegboard. If you are making long, straight cuts, it is best to use a circular saw. If you are making curved or circular cuts, you should use a jigsaw. A table saw is also an appropriate choice for long, straight cuts.
That really is all that there is to it. At that point, you will have a piece of pegboard that can be installed.
You can use almost any tool used for cutting wood to cut pegboard. The best tools that are available for the purpose, however, are either a jigsaw or circular saw equipped with a fine-toothed blade for cutting wood.
Related Articles
What Can You Use To Cut FRP Panels? (How To)
What Can You Use To Cut Vinyl Lattice? (How To)
What Can You Use To Cut Balsa Wood? (How To)
What Can You Use To Cut Brass Pipe? (How To)
ReadyToDIY is the owner of this article. This post was published on September 20, 2022.