Skip to Content

What Can You Use To Cut Brass Pipe? (How To)

Brass is a relatively soft material but there are still certain ways that it can be cut successfully. Since it is soft, it has its own challenges. What can you use to cut brass pipe?

The best way to cut brass pipe is using a tube cutter. You can choose the one that is best suited for the area where you’re making the cut and then work it in order to cut through the pipe successfully.

Tools to cut brass pipe

You might be surprised by how many different tube cutters are available. Some are used for work in small areas and others can be used if you have a large area where you’re working.

You should also choose the proper tube cutter to cut brass. Generally speaking, any tubing cutter that will cut through copper will also cut through brass but you need to be cautious.

What Can You Use To Cut Brass Pipe? (How To)

One of the most important things to consider when cutting brass pipe is the fact that it is a soft material. It may be easy to cut but it can also be damaged if you are not careful.

Putting too much pressure on the pipe by tightening down the tube cutter can actually cause the pipe to bend or pinch. If you allow the tool to do the work for you and don’t apply too much pressure, it will cut through it successfully.

Of course, as you will find out in this article, a tube cutter is only one of the many different options available for cutting through a brass pipe. You also have other tools, provided you use them properly.

If you use any other tools to cut through a brass pipe, it will likely leave a rough edge. This can be problematic because it makes it more likely for debris to get caught in the area and cause buildup in the drain.

After cutting through a piece of brass pipe, look for those rough edges and file them down or use a tool to de-burr the edge. It should file down quickly and easily and it will really make a difference in the longevity of the pipe.

You should also consider your safety when cutting through a brass pipe. As far as the tool is concerned, a tube cutter is relatively safe but you should still consider the following.

Wearing gloves is always important when doing any type of work with metal tubing. After cutting the tube, you may be left with a sharp edge that could easily cut you.

At a minimum, you should wear a good pair of all-purpose gloves. Otherwise, heavier gloves may be beneficial.

Safety glasses should also be worn when cutting through a brass pipe, especially if you are using some type of saw to do so. Any small pieces of metal that get in your eye could cause damage, and sometimes it could be irreparable.

Finally, if you are cutting brass pipe with a saw, you should wear a respirator. The metal dust and even fumes that come off of brass can be dangerous but wearing a respirator will help.

Let’s take a look at some of the different options for cutting through a brass pipe. Some of these will work well and others are better avoided.

Can You Use Pipe Cutter To Cut Brass Pipe?

Tools to cut brass pipe

There are always good ways and bad ways to do any job. Is using a pipe cutter a good way to cut brass pipes?

You can use a pipe cutter to cut through a brass pipe but if the pipe is smaller, you should opt for a tubing cutter. This will make the most accurate cuts without causing a lot of dust or damage in the process.

Most people use the terms pipe cutter and tube cutter synonymously. Tube cutters are actually designed for cutting softer materials such as brass.

Can You Use Hacksaw To Cut Brass Pipe?

Tools to cut brass pipe

A hacksaw is an excellent way to cut through a brass pipe. You will have to support the pipe so it doesn’t move while you are cutting. Make sure that you use a new blade and try to use as much of the blade as possible so it lasts longer.

In most cases, a hacksaw is only used when other options are not available. It can still do well in a pinch when cutting through brass.

Can You Use Torch To Cut Brass Pipe?

Tools to cut brass pipe

A torch is not the best tool for cutting through brass pipes. Some torches can work if you use them but it will take you a while to cut through the pipe. Other torches may not get hot enough for cutting through brass.

Can You Use Angle Grinder To Cut Brass Pipe?

Tools to cut brass pipe

If you have an angle grinder available, is it a good choice for cutting through a brass pipe?

You can use an angle grinder equipped with a diamond-encrusted blade for cutting through a brass pipe. In most cases, an angle grinder is used when the brass pipe is in place or if it needs to be cut and removed.

You might find that an angle grinder is a great choice if you are working in a tight area and don’t have the option of using a tubing cutter.

Can You Use Scroll Saw To Cut Brass Pipe?

Tools to cut brass pipe

A scroll saw will cut through a brass pipe if it has the proper blade but it is not the best choice for this purpose. In many cases, using a scroll saw for cutting brass will result in a short lifespan for the blade.

Can You Use Router To Cut Brass Pipe?

Tools to cut brass pipe

A router is not the proper tool for cutting through a brass pipe. It can be used for cutting brass if the proper blade is used but you should either use a tubing cutter or hack saw rather than using a router for this job.

Can You Use Chop Saw To Cut Brass Pipe?

Tools to cut brass pipe

If you have to cut multiple brass pipes, you can use a chop saw with a diamond blade. It’s a good choice for cutting cleanly and accurately but you will still have to de-burr the brass after you are done making the cut.

Can You Use Bandsaw To Cut Brass Pipe?

Tools to cut brass pipe

A bandsaw is not a good tool to use for cutting through brass pipes. In many cases, the blade speed will keep the blade from cutting properly. You would also have to use the right type of blade or it would foul very quickly.

Can You Use Jigsaw To Cut Brass Pipe?

Tools to cut brass pipe

Jigsaws can be used for cutting through a brass pipe but it is not the most convenient tool for the job. If it is the only cutting tool you have available, you should use a diamond-encrusted blade and secure the brass pipe before making the cut.

How To Cut Brass Pipe The Right Way

Confused man standing

There is always going to be the best way to do anything, and that includes when you’re cutting through brass pipes. Here is the option you should consider to cut brass pipe successfully.

Although you can use many different types of tools for cutting brass pipe, we recommend that you use a tubing cutter. Doing so will eliminate the dust that may be created by using a saw. It will also make a cleaner, more accurate cut.

Here are the steps needed for cutting a brass pipe successfully:

1. Measure and Mark – Measure the amount of pipe you will need and then mark the pipe with a marker.

2. Secure – Use a clamp to hold the pipe in place. You can hold it with your hand, but it is better if you secure the pipe in some way or another. Be careful you don’t bend or pinch the pipe while securing it.

Copyright protected content owner: ReadyToDIY.com and was initially posted on September 24, 2022.

3. Attach Tubing Cutter – Open the cutter so the blade will fit successfully around the tube. It will sit on the rollers and the blade will be touching the surface of the pipe.

4. Turn – Snug the tubing cutter so the blade is touching the surface of the pipe if it is not already. You can then turn the cutter around the tube once or twice. Go slowly and allow the tool to do the work for you.

5. Snug – After spinning the tube cutter around the pipe, tighten the blade again so that it is touching the area where you’re cutting. You don’t need to force the blade into the pipe, just make sure it is resting against the edge. You can then turn the pipe cutter one or two rotations again and repeat until the pipe is cut.

6. Ream – There are likely to be burrs on the inside of the pipe. You can use a pipe reaming tool to remove the burrs and smooth out the inside and outside of the cut area.

You are now ready to work with the pipe or thread it if necessary.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on September 24, 2022.

The best tool to use when cutting brass pipe is a tubing cutter. You can choose the tubing cutter that is best suited for the area where you will be making the cut, including the size and shape so that it fits well.

Related Articles

What Can You Use To Cut Metal Door? (How To)

What Can You Use to Cut EMT Conduit Pipe? (How To)

What Can You Use to Cut Metal Rod? (How To)

What Can You Use To Cut Metal Pole? (How To)

ReadyToDIY is the owner of this article. This post was published on September 24, 2022.

What Can You Use To Cut Copper Sheet? (How To)