Skip to Content

Whirlpool Washer Loud When Spinning (Here’s the Fix)

All washing machines make some sounds that vary according to the model and the machine’s condition. The gentle sounds come out when the washer is spinning, and that’s normal. However, excess sudden and irritating sounds could imply that something is wrong with the washer. Read on to learn common reasons why a washer can be loud when spinning and how to solve the issue.

Loading the washer with too many clothes or loading clothes unevenly are the core reasons for the washer being loud when spinning. Loose drum screws, broken drum spider arms, faulty shock absorbers, and broken drive pulleys are other possible reasons. Call an experienced technician for inspection.

Washing machine with clothes inside

Washing machines are complex devices, and many reasons could be behind the loud noises when spinning. Some causes may be easy to DIY fix, but you may need an expert for the technical problems. Nevertheless, you should always unplug the washer from power before inspecting it.

Squeaking is a common sound in new washers which should end after at least five spins. Gurgles and slaps happen when the drain pump finishes draining, and the sound should stop immediately after the water is drained. Knock sounds are common in new washers and should last for less than a minute. Any unexplained sound, which lasts for minutes, signifies the washer setup is wrong, or some parts are faulty and need repair.

How to Fix Whirlpool Washer Loud When Spinning

Washing machine with clothes inside

Whirlpool is one of the oldest companies that are well known for strong, well-performing washers. The washers can last many years but need proper care to offer a longer service. As with all washing machines, you may notice varying sounds on different spinning stages on your whirlpool washer. According to the company, most of the sounds are normal and don’t signify anything wrong. However, persistent or alarming sounds need immediate action.

To fix Whirlpool washer loud when spinning, level the machine well on the floor. The legs are adjustable, so you can easily move them up and down. Check if clothes are well distributed, and confirm the internal parts are all working perfectly. Contact the manufacturer if the problem persists.

Here is a simplified description of the solutions:

Place the Washer on Even Ground

Gridding or rubbing noises are the most common in Whirlpool washers, and an uneven surface causes them. Follow the installation steps in the user manual to ensure your whirlpool washer is stable on the ground. Adjust the legs well and place the washer in a spacious place.

Balance Clothes in the Drum

Unbalanced clothes in the drum could also make your Whirlpool washer loud when spinning, so you should check if the clothes are well-balanced. If possible, adhere to the manufacturer’s instructions on weight limits to avoid damaging the other components of your washing machine.

Inspect the Washer Components

Inspect your Whirlpool washer to identify the cause of the sound. The main parts to inspect include the drain hose, the washing machine motor, the water inlet valve, the drum shock absorbers, and the rods. When one of the parts is faulty, the entire washer struggles to operate because all parts must coordinate to clean the clothes. Confirm that none of the components is loose, broken, or missing.

Consult an Expert

The last possible action for a loud Whirlpool washing machine is to consult an expert. All the washers come with a warranty, and you may get a replacement if the problem comes from the manufacturer’s side. Similarly, the professional may inspect the washer and advise on what you could be doing wrong, and you can solve the issue.

Reasons Why Your Whirlpool Washer Is Loud During Spin Cycle

Washing machine with clothes inside

A noisy washer during the spin cycle is a cause of concern. The earlier you detect the problem, the sooner you fix it and protect your washing machine from costly damage. This section highlights the top seven reasons your washer is loud during the spin cycle.

Your washer is loud during spinning because of too much laundry, uneven clothes distribution, loose drum screws, worn-out shock absorbers, or a broken seal. Other reasons include faulty suspension rods, faulty drum bearings, or a trapped object/coin. Involve an expert if the problem persists.

Here is a brief discussion of the above problems for the washer loud when spinning.

Copyright protected content owner: ReadyToDIY.com and was initially posted on January 17, 2023.

Reason 1: Overloading or Unbalanced Clothes

Sometimes, your washer may be loud when spinning because you have added too many clothes. Excessive clothes leave no room for spinning, and that’s why the irritating sound comes out. Similarly, unbalanced clothes on the washer can cause the sound. Ensure you distribute your clothes evenly to leave enough room for smooth spinning.

Reason 2: Loose Drum Screws

Loose drum screws are another reason why your washer may be loud when spinning. Some parts, including the drum screws, may loosen as your washer gets old. Loosening may also be caused by overloading clothes or improper washer maintenance. Inspect the washer’s drum screws to check if they are loose, and tighten them to reduce the sound when spinning.

Reason 3: Worn Out Shock Absorbers

Shock absorbers are small springs located at the lower part of your washing machine. These springs absorb the impact of your clothes when spinning. Worn-out or poorly disconnected shock absorbers may cause the washer to produce sound when spinning because the machine shakes vigorously. If your washer is loud when spinning, check the condition of your shock absorbers and repair them if they are faulty.

Reason 4: Broken Seal

The seal around the washer prevents water from leaking outside and ensures smooth spinning. A broken seal poses a problem to the optimum functioning of your washer, and you may notice a strange noise coming out. In addition to the sound, water may leak outside, making the entire washing operation messy. Always ensure the rubber seal is in perfect condition before you put clothes in the drum.

Reason 5: Faulty Suspension Rods

Suspension rods play a key role in dampening the movement of clothes in the bathtub. If one or all the rods are loose and damaged, chances are the washing machine will vibrate when spinning, and the sound produced may be irritating. If your washer is loud when spinning, inspect the condition of the suspension rods and repair them if any are damaged or loose.

Reason 6: Faulty Drum Bearing

Every washing machine comes with a drum bearing that holds the drum in position and ensures optimum operation. When the spinning cycle starts, the bearings move to hold the drum and the clothes’ position. A broken bearing creates a very loud bang that may cause concern. Always ensure the drum bearings are in excellent condition before your switch on the washer.

Reason 7: Trapped Coin or Object

Usually, clothes in a washing machine move fast when the spinning cycle starts. You may have left a coin inside one of your clothes which gets thrown out during the spinning process. The metallic object/coin begins to spin quickly in the washer, resulting in loud sounds when spinning. Solve this by checking and removing any object in your pockets before you switch on your washer.

Troubleshooting Your Whirlpool Washer If It’s Making A Loud Noise When Spinning

Washing machine with clothes inside

A washing machine should be quiet or produce a very minimal sound when spinning. Sudden or persistent sounds imply something is wrong with the clothes set up or some parts of the washer. Thankfully, most of the problems are minor, and you can easily fix them on your own. A professional only becomes necessary when the problem is persistent. Here are practical tips to consider when facing a problem.

To fix your washer making sound when spinning, avoid unbalanced loads, inspect the drum for coins and foreign objects and check the seal’s condition. Ensure drum bearings are in perfect condition, check the washer feet, and review the drum arms.

Here is a brief description of the top solutions to a washer loud when spinning.

Solution 1: Avoid Unbalanced Loads

Mixing light and heavy clothes when using a washer may sometimes produce an irritating sound. For instance, if you are washing a duvet and other light garments, the duvet will absorb much water, and the load will be unbalanced if the duvet is on one side and more lightweight clothes are on the other.

Ensure your clothes are evenly distributed, so the drum avoids noisy and vigorous spinning. You can also choose to wash heavy and light clothes separately to minimize the balancing issue.

Solution 2: Inspect the Drum for Coins/Foreign Objects

Coins and other rogues in the drum may be the cause of strange noises coming from your washer when spinning. Solve this problem by thoroughly checking your clothes before putting them in the drum. Ensure there are no sharp objects that could cause disturbing noises. Also, inspect the drum itself to confirm there are no items from the previous usage, which might make the washer loud when spinning.

Solution 3: Replace the Bearings

Bearings ensure the drum moves well during the spinning process. Broken or loose bearings create a loud sound when spinning, so repair and replacement may be a great solution. Unplug your washing machine from power, open the door and examine the bearings. Replace them with new ones if broken, or tighten them if they are loose. Switch on the washing machine to check if the problem is still there.

Solution 4: Examine the Washer Feet

Your washer may be loud when spinning because the washer feet are not stable. Unplug your washer from power and follow the manufacturer’s instructions on draining or stopping the machine when in use. Check all the legs to see if they are stable. The ground/floor should be even so that the washer does not bend towards one side. 

Copyright article owner is ReadyToDiy.com for this article. This post was first published on January 17, 2023.

Solution 5: Repair/Replace Faulty Belt

A loose, faulty, or broken belt in your washer can cause significant damage when not repaired early enough. Find a new belt for your washer if a faulty belt is the cause of havoc to your washer when spinning. You can easily find a new belt online or from the manufacturer. An expert should help you fix the new belt, so you don’t make mistakes.

Solution 6: Inspect the Seal

The seal ensures water does not get out when spinning. However, the seal can also be a perfect hideout for coins and other small objects which may interfere with the spinning process. Check around the seal and clean it well before you load clothes. You may need to replace the seal if it’s too old for repair or has mold.

Solution 7: Inspect Shock Absorbers

Most washing machines come with shock absorbers which reduce tub movement during the spinning process. The absorbers are attached to the base of the device and are extremely helpful during the speedy spinning sessions.

If your washer has shock absorbers that are loose or damaged, tub movement will be very high when spinning and you may hear strange noises. In addition, water may leak. It’s advisable to carefully inspect the shock absorbers before using the washer.

Related Articles

How To Fix Whirlpool Washer Beeping

ReadyToDIY is the owner of this article. This post was published on January 17, 2023.

Whirlpool Washer Is Stuck On Sensing (How To Fix)