Although vinyl planks might admittedly be an upgrade on your cement flooring and laminate carpeting, these easy-to-install sheets can be a little hard to transition around your kitchen cabinet and door jambs. Read on to learn whether you can put vinyl planks around door jambs!
You can put vinyl planks around door jambs. They can be installed using transitions, measuring tapes, and vinyl plank adhesive. If you are looking to install Laminate Vinyl Planks (LVPs) around your door jamb, it is a good idea to cover up gaping or yawning subfloors.
In this article, we discuss the possibility of putting vinyl planks around door jambs, and also provide a detailed guide on the right way to maneuver vinyl planks around your door jambs.
Can You Put Vinyl Planks Around Door Jambs?
Widely used for their versatility and inexpensive aesthetic, vinyl planks are primarily known for their wide range of imitation wood yet stylish versatility. However, a badly put-together vinyl plank may just simply ruin your decor, which a decent number of homeowners would, obviously, be keen to avoid.
You can put vinyl around door jambs. To do so, the vinyl planks are measured, and the distance between the LVP and the door jamb is mapped out on the plank. The plank is then cut accordingly and then pushed flush against the door jamb.
There is always the option to employ a professional vinyl floor installer to complete the job for you.
Should You Put Vinyl Planks Around Door Jambs?
Vinyl planks might be an affordable flooring option on a budget, but there are usually uncertainties when fixing vinyl planks around crevices. However, is it a good idea to put vinyl planks around a door jamb?
You should put vinyl planks around a door jamb, as missing vinyl planks around your door jambs wouldn’t just ruin your flooring, but could potentially ruin your decor. The gaping sub-floors might sharply contrast with the tone of the room.
Whether you are getting a professional installer, or set to do the grunt work yourself, you would want to be certain the LVP cut isn’t too exaggerated and it’s fit and unflushed.
What Tools Do You Need to Put Vinyl Plank Around Door Jambs?
Installing vinyl floors might be relatively easy, but having the correct tools would be of great benefit to you, in terms of the time it takes to complete the job, and, ultimately, the end result. So, what tools do you need to navigate vinyl planks around the contour of your door jamb?
Copyright protected content owner: ReadyToDIY.com and was initially posted on November 28, 2022.
The right tools vary from floating LVP to glue-down LVP. Here we explore supplies and tools across both. Let’s jump right in.
All-purpose Tools
- Knee-pads
- Safety glasses
- Chalk line
- Cold chisel
- Dust mask
- Multi-angle meter cutter
- Finish nail gun 18 GA
- Finish nail gun 16 GA
- Hammer
- Floating Luxury Vinyl Plank
Supplies to Install Floating Vinyl Plank
- Knee-pads
- Safety glasses
- Chalk line
- Cold chisel
- Dust mask
- Multi-angle meter cutter
- Finish nail gun 18 GA
- Finish nail gun 16 GA
- Hammer
- Floating Luxury Vinyl Plank
Supplies to Install Glue-Down Vinyl Plank
- Vinyl plank adhesive
- Suitable Trowel
- Vinyl plank adhesive
- Suitable Trowel
- Flooring roller
What Preparations Do You Need to Install Vinyl Planks Around Door Jambs?
Now that you have gathered everything, from vinyl planks and transitions to your adhesive and fire nail gun, it’s time to begin. But, what do you do next?
Before installing vinyl planks around door jambs, it is usually a good idea to run a maintenance check on your equipment or tools. If you are employing floating vinyls, we especially recommend looking through the nail gun for a pneumatic problem or air leaks in the nailer.
How To Install Vinyl Plank Around Door Jambs
With the mode of installation varying across the two types of vinyl planks, there is more than just one-way of installing around door jambs. Here, however, we follow the installation procedure for both the Glue-Down Vinyl Plank and it’s floating LVP counterpart, highlighting an altogether beginner-friendly method to install vinyl planks around door jambs:
Procedure for Installing Glue-down Vinyl Plank:
Step 1: Using a dummy piece of wood, stretch the length of a vinyl plank around the doorway you are looking to transition.
Step 2: Hold down the transitions to the Vinyl Plank so that it fits flush to the wall.
Step 3: With a pencil, mark out a third of the length away from the door jamb and trace this perpendicularly along the length of the Vinyl Plank.
Step 4: Using the demarcations, arrived at in step 3, cut the mark tracked out onto your vinyl plank with a multi-purpose utility knife or a multi-angle meter cutter. When cutting the vinyl floor, be sure to take your time. Be precise and cut slow.
Step 5: Depending on the type of underfloor, prepare the door jamb sub-floor area by looking out for holes and fissures and filling them in before proceeding with the installation.
Step 6: To test the fit of the already worked on Vinyl Plank,, press it flush against the door jamb. You would want to ensure the LVP doesn’t bleed past the door jamb.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on November 28, 2022.
Step 7: For a glue-down Luxury Vinyl Plank, spread a copious amount of the Loctite glue (or any adhesive) out onto the subfloor and wait for it to set dry.
Step 8: Once your adhesive is sufficiently developed, proceed to lay down the vinyl planks carefully onto the already worked on subfloors.
Step 9: Using a 100 pound roller, drive over the freshly laid down vinyl planks to ensure they are firmly glued to the underfloor.
Procedure for Installing Floating Vinyl Planks
The procedure for installing Floating vinyl planks is the same as that of glue-down LVPs through step 1 to step 4.
Step 5: Set the LVPs to fit around the door jambs and lock it in. The use of a tapping block and a rubber mallet at this point would be highly recommended to ensure a proper flush.
Step 6: Using the nail gun, shoot a brad nail into your quarter round or nail shoe.
Pro Tips
- When laying out your own Vinyl Plank, it helps to pay attention to the pieces locked together while laying flat, as vinyl planks are seen to vary from one manufacturer to another.
- Floating LVP might be a diy favorite, but you might instead choose to install glue-downs due to an easy repair in the future.
Related Articles
Can You Put Vinyl Plank Diagonally? (How to)
Can You Put Vinyl Planks Under Door Jambs? (How to)
Can You Put Vinyl Plank Without Removing Baseboards? (How To)
Can You Put Vinyl Plank Under Dishwasher? (How To)
ReadyToDIY is the owner of this article. This post was published on November 28, 2022.