When installing vinyl siding over plywood, work from the bottom up. Install the foundational strips first. Their job is to hold the vinyl panels in place at the bottom and top of the wall and the edges. Foundational strips include the starter stip, J channels, and utility trim.
There are many different choices when it comes to flooring. Some of those choices are going to make your home more luxurious and others can …
There are differences between vinyl plank and vinyl sheet beyond the look. Vinyl plank tends to be more luxurious and can mimic the look of wood or stone. Vinyl sheet is a good choice for those on a budget and if you just need to put a quick floor down to cover the subfloor.
We recommend you proceed to install sheet vinyl flooring in the basement, especially if it is one that sees considerably high traffic volume. This means if the basement is used as a laundry room or playroom then installing sheet vinyl flooring would be an ideal choice.
We recommend you put sheet vinyl flooring on a wooden subfloor because of its functionality, low cost implication, dust and moisture-resistant features, and relative durability. Not to mention that it delivers a new look and feel to your floor in general.
Vinyl plank tends to be a more economic choice than hardwood, although both tend to be durable and beautiful once they are installed. One area of the home where you would want to use vinyl plank instead of hardwood is any part of the home that is prone to moisture.
If you need to choose between carpet or vinyl plank flooring, consider that vinyl plank flooring is better for damp areas of the home and much easier to clean. It also tends to last longer than carpeting. If you’re just looking for flooring that is inexpensive and uncomfortable under your feet then carpeting may be the right decision.
You can put sheet vinyl flooring on stairs. Sheet vinyl flooring is durable and, if installed properly, can last a very long time without the need to renovate. Not to mention that they are easy to maintain, relatively cheap, and help preserve the condition of your walls or stairs.
Ensure the surface is spotless, even, and dry before putting sheet vinyl directly on the concrete. Remember that failure to account for repairs can lead to problems that will force you to remove the sheets and go through another installation process.
You can install vinyl planks under a dishwasher. While we do not recommend you do this, because of the tendency of water to spill on the vinyl planks and ultimately lead to early damage, if you absolutely need to put vinyl planks under a dishwasher remember the following:
You can leave existing baseboards while installing vinyl planks on your walls or floors as these boards do not hinder the plank installation process in any way. Proceeding to install your vinyl planks this way, will save you time and energy that you would have otherwise spent removing baseboards.
Before installing vinyl planks around door jambs, it is usually a good idea to run a maintenance check on your equipment or tools. If you are employing floating vinyls, we especially recommend looking through the nail gun for a pneumatic problem or air leaks in the nailer.
While vinyl planks might be growing increasingly popular due to their water resistance and simple aesthetics, vinyl planks can be a little tricky to install …
Vinyl planks can be installed diagonally. We generally advise that you proceed with installing your vinyl planks diagonally when the walls of the room are angled. Putting vinyl planks diagonally, when compared to horizontally and vertically, gives the flooring a more appealing look.
Hallways connect different rooms within the home and are therefore, arguably, regarded as one of the more influential areas within a house when it comes …
If you want to maximize the efficiency and aesthetics of your garage, you should install vinyl planks. Once you do this, you must ensure the garage is equipped with fewer mechanical tools because vinyl planks dent when heavy equipments are placed on them
Choosing the right basement flooring design will enhance the appearance of your home. Thankfully, the vinyl plank is one such material that is a perfect …
In general, vinyl plank flooring is always better to use rather than peel and stick flooring. Peel and stick flooring is not as visually appealing, and is not as resistant to wear and tear as vinyl plank flooring. It also requires the subfloor to be in much better condition before installing it.
Overall, vinyl planks should be used in all cases except in hot climates, or if you have a strong preference for the look of ceramic tiles. Vinyl plank tiles have a range of advantages over ceramic tiles. Vinyl planks are more comfortable to walk on, and provide better insulation than ceramic tiles.
When it comes down to actually cutting the flooring, adjust the circular saw blade so it is the thickness of the board. If you can raise the vinyl flooring slightly, this will make the cutting easier. If this is the case, you can slip the 2×2 under the floor and adjust the blade on the saw so it is a little more than the thickness of the floor. I set the saw to a cut depth around 1/32-inch deeper than the thickness of the vinyl flooring layer. This ensures that the saw blade does not cut into the subflooring or the concrete if you are working in a basement room.
Overall, first measure the dimensions using a tape measure. For non-square shapes such as curves, and triangles use a contour gauge, or make a template out of cardboard. A jigsaw works the best for curved cuts. For straight cuts any power saw can be used, but also a regular saw or utility knife.
In general, lay vinyl planks as close to a curve or corner as possible, then measure out where the curve or cut needs to be using a measuring tape, and a contour gauge. After that the cut can be made using a power saw or regular saw. A jig saw works the best for curved cuts.
If you have a mobile home, you want it to look its best. Sometimes, this will mean doing upgrades. Is vinyl plank a good option …
Vinyl plank is a flooring option that is considered in many different parts of the home. Is it also something that you should consider installing …
Undoubtedly, vinyl plank flooring is beautiful. It is used in homes around the world as a less expensive alternative to get the look of wood. …
You can install vinyl plank on the ceiling if you glue it on. Any type of vinyl plank can be used for that purpose, including a floating floor or standard glue-down plank. As long as it is glued in place, it will provide a beautiful ceiling that remains up for a long time.
If you have a cement board in place on the floor, you can easily use it as a subfloor for vinyl plank flooring. It will last for a very long time and has the benefits of water resistance and not growing mold. As long as it is in good shape and free from defects, you can install the cement board without worry.
Generally speaking, you will choose a click-lock flooring option rather than one that is either glued to the subfloor or stapled down. It is only a floating vinyl floor that will work well over radiant heating. Otherwise, you may be compromising the heating system during the installation process.
Engineered hardwood makes a suitable subfloor for both glue-down and floating vinyl plank flooring. As long as you are not installing over a wood floor that has been glued to a concrete subfloor, it can be done successfully. Always check the manufacturer’s instructions and follow their guidance before making any decisions about the flooring you will use in your home.
The first, and most important step in installing vinyl plank flooring is to have the flooring in the room for a few days before the installation takes place. Vinyl will expand and contract according to temperature and humidity levels. It will take a few days for it to acclimate to the new room.
If you want to know how to put vinyl plank flooring over asbestos tile, you will need to closely follow the following requirements. These include wearing a certified respirator, professional level goggles that form an effective seal around your eyes and a tight-fitting hat.
It’s always been a challenge to determine the cost of a Vinyl plank flooring project if you don’t know what you need to include or …
The easiest way to transition from vinyl plank to another floor is to use a transition strip. These strips come in a variety of types, colors, and sizes to work well with almost any type of vinyl and any secondary floor. As long as room is left for expansion, these transition strips make the job easy
When installing a tile floor and transitioning to any other type of floor, you would often use a transition strip for that purpose. These can either be permanently installed under the edge of the tile or you can install a molding strip with a channel that fits between the tile and the adjacent floor.
Most laminate floor manufacturers will make a T molding seam strip that will allow you to match up a laminate floor with an adjoining vinyl plank floor. A gap will be left between the two floors to install the molding sleeve and enough extra space will be left to allow for floor expansion. The T molding will be put in place and make the job look great.