JLab is an audio company that was founded in 2005. Since that time, they have helped many to enjoy sound in various ways. If your JLab earbuds are not loud enough, there are ways to make adjustments.
One way to adjust the volume of JLab earbuds is through the JLab Audio App. The app allows you to turn the volume up and down, and also has an attached equalizer and options available for sound output. If adjusting the volume directly doesn’t work, try adjusting the equalizer to optimize the sound and increase the volume.
Here are some other troubleshooting tips to try when your JLab earbuds’ volume is too low:
1. JLab Audio App: Although there may be differences from one type of Jlab earbud to another, many of them are run by the audio app. This is especially true of the JBudsAir model.
The app allows you to enjoy a more immersive experience when using the earbuds. Not only does it allow you to turn the volume up and down, but there is also an attached equalizer and options available for sound output.
When looking for a way to adjust the app, first try adjusting the volume directly. The volume may also be connected to the rocker arm on the side of your mobile device.
If you aren’t able to get enough volume out of the earbuds by using the volume setting, you may need to try the equalizer. Adjusting the various components of the equalizer to a higher setting can optimize the sound and increase the volume.
It would be nice if there was a single method for adjusting the volume using the audio app. Sometimes, you just need to go into the settings and make changes until you get the volume you desire.
Copyright protected content owner: ReadyToDIY.com and was initially posted on October 31, 2023.
2. Noise Control: One of the issues that many people using earbuds face is background noise and how your environment can impact the volume. You may be getting the same volume out of the earbuds but noise in the background can make it seem as if they are not pumping out the volume as much.
One obvious way to overcome this issue is to move to an area where there is less ambient noise. You may notice that the earbuds sound louder as soon as you move to quieter surroundings, but it is actually just your perception of the sound.
On the other hand, some models, such as the JLab Epic Air Sport earbuds may have settings that adjust the volume according to any outside noise and your surroundings. This is sometimes referred to as noise canceling and ambient sound and there may be various modes associated with it on the app.
Look at the app for any settings that may be associated with ambient sound. These may not be able to control the external noise but they can make a difference in the sound that is being produced by the earbuds.
One benefit of changing the ambient sound mode or turning it off is that it allows you options for adjusting the volume directly. Regardless of the surrounding noise or conditions, you can turn the volume up and it will stay up.
3. Ear Tips: JLab earbuds are known for providing a number of different ear tip sizes when you first get the earbuds. They come packaged and most people will simply choose one that looks right and throw the rest away.
It’s a good idea to try all of the different ear tip sizes and sometimes, you may even need to change them after you have been using one particular size for a while.
The ear tips make the fit snug and that makes a difference on a number of levels. First of all, when you choose a tip that fits your ear canal properly, it can improve the way the bass sounds.
Improving the bass can also make it seem as if you are increasing the volume. Having a better fit with your ear canal can also make a difference in the volume directly.
Why Your JLab Earbuds Volume Is Low
Although there are many different reasons why the volume in your earbuds may be too low, there are some that may occur, regardless of the make or model.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on October 31, 2023.
One of the common reasons for low volume in earbuds is due to the device being blocked by earwax, dirt, or even insects. This problem can be fixed by gently cleaning the inside of the earbud opening with a toothpick or another device, but caution is needed to avoid puncturing anything. In some cases, taking apart the earbuds may be necessary to clean them completely, but this could void the warranty if they are new.
1. Blocked Buds: One of the more common reasons why you may have low volume in your earbuds is due to the device being blocked. Some common reasons why this occurs is due to earwax, dirt, or even insects.
The way to fix this problem is relatively straightforward, but you still need to be cautious when doing so. You can use a toothpick or another device to gently clean the inside of the earbud opening, but you need to be cautious that you don’t puncture anything as a result.
In some cases, you may have to take apart the earbuds to get them cleaned completely. If you do so, you could be voiding the warranty if they are new.
2. Ear Canal: Each of us is unique and this also means that we have a unique shape to our ear canal. Although earbuds are made to provide us with sound, it does not always do it in the same way for each person.
Some people have small ear canals and other people have large ear canals. They may also be shallow or deep. In any case, there are times when it may be necessary to adjust the earbuds according to our ear canal.
Typically, earbuds come with various fittings that are interchangeable. These can go a long way in helping you to hear the sound better and even to have a better fit.
3. Earbud Mods: When you buy earbuds, they become a part of your style. Some people may buy aftermarket modifications in order to make them more stylish or unique.
These mods can change the way earbuds look but they also can change the way they work. In some cases, the mods may not be conducive to giving you the best experience with sound.
It’s important to express your individuality but if it is interfering with your ability to hear the sound from your earbuds, you may want to find another way to do so.
4. Distortion: There may be times when you are not perceiving the sound as well as you could because of audio distortion. This can be a difficult problem, but it is also fixable.
Try looking at any app that comes with the earbuds or is being used for a way to adjust the frequencies. Sometimes, it is subsonic frequencies that cause the sound to be audible but may affect the way you hear it.
It may also be possible to remove some distortion by changing the way you wear your earbuds. Some minor adjustments to how they enter the ear canal can make a big difference.
General Fix For JLab Earbuds Volume That is Too Low
We live in a world that is built on technology. We use it with our mobile devices, including our smartphones, iPods, and other audio devices.
When you have a problem with those audio devices and the volume isn’t as high as it should be, there are things you can do to make the adjustment.
A potential cause of low volume in earbuds could be the presence of earwax or other debris in the speaker of the earbud. A solution to this issue is to gently clean the earbuds using a dry cotton swab or a brush with soft bristles, ensuring not to damage the speaker in the process.
You can also try increasing the earbud volume when it is too low by making adjustments in the associated app. Adjusting the volume directly can make the difference you desire. You can also adjust the equalizer or any preset options to get more volume out of the same earbuds.
When technology doesn’t work to our advantage, it can be frustrating but there are always options to make a difference. Even an old set of earbuds can give adequate volume output when everything is set properly.
Conclusion
We all want to get the most out of our listing experience when using earbuds. They allow us to immerse ourselves in the sound, regardless of whether we are listening to music, a podcast, or any other audio.
Low volume on earbuds is directly connected to a problem with the associated app. This could be an app made directly by the earbud manufacturer, or it could be a secondary app used for playing music or podcasts.
If you aren’t able to adjust the volume to a higher level using the app, try using the rocker switch on the side of the mobile device or turning up the volume directly. Any integrated controls used with the earbuds should also be scrutinized carefully.
Problems with the internal components are few and far between but they can occur with earbuds at times. This could include having the earpiece blocked by earwax or even if the earbud is not fitting properly in your ear canal.
Little adjustments in the earbuds or the associated technology can make big differences in the volume. As you are making adjustments, always be careful that you do so gradually so as to save your hearing in case it turns up quickly.
The responsible use of earbuds is something that we are reminded of frequently. This includes the volume level, but when you need the volume level higher, make some adjustments and get back to your listening enjoyment.
Related Articles
JLab Earbuds Have No Sound (How to Fix)
ReadyToDIY is the owner of this article. This post was published on October 31, 2023.