Skip to Content

LG Washer Keeps Repeating the Spin Cycle

LG washers are some of the most popular laundry machines in the world. They’re energy-efficient, quiet compared to washers, but the spin cycle can sometimes be a bit challenging to deal with. If your LG washer is stuck spinning without draining or rinsing, then you’re in the right place.

LG washers keep repeating the spin cycle when the water isn’t draining. This issue is often caused by broken sensors and other malfunctioning components. A hard reset can fix the problem, but you might need to buy a new sensor if it keeps happening.

Throughout this article, you’ll also learn the following information about LG washer cycles:

  • How you can quickly fix your LG washers broken spin cycle
  • Different causes of this common problem
  • Various preventative methods

How to Fix an LG Washer That’s Stuck on Spin Cycle

When your laundry machine is stuck on a repetitive spin cycle, it can cause your clothes to get soaked without drying. Not only that, but it uses more water, which is bad for the environment and your water bill. Needless to say, you’ll need to fix the washer as soon as you notice the problem.

Here’s how to fix an LG washer that keeps continuing the spin cycle:

  1. Try turning it off and back on. This process might seem obvious, but you’d be surprised how quickly this simple solution can work. Whether there’s a blocked sensor or a mechanical component that won’t switch the cycle, you’ll be doing yourself a huge favor with this step.
  2. Turn off the LG washer, unplug it, and replace the sensor. There’s a sensor in most washer machines that tells the system when it’s time to drain the water. Once the sensor notices that the clothes are soaked, it will drain out the water and spin through the rinsing and remaining cycles.
  3. Remove the filter door and drain the machine. If there’s something keeping the water from draining, you’ll never leave the spin cycle. Once you’ve completely drained the water, you can try to repeat the process. Again, you’ll need to turn off the washer for this step.
  4. Remove all of the debris and grime from the filter. This clog is often the main reason that sensors mess up or refuse to drain. When the water stays in the machine, it continues to spin indefinitely. If you’re tired of manually draining and replacing your clothes, then maintain the filter regularly.
  5. Replace the cap on the draining hose, put the filter back in place, and cover everything up as it was. Plug the laundry machine back into the outlet and try starting it again. It should work since there’s no longer a clog, broken sensor, or excess water filled in the main tank.

What Causes This Issue?

Knowing what causes the problem will allow you to prevent it from happening. You’ll learn more about how you can prevent your LG machine from continuously spinning in the next section. For now, let’s focus on discovering what factors contribute to an extended or broken spin cycle on your washer.

Old Filter Systems

When the filter on your washer machine is old, corroded, or clogged, it’ll start to show all sorts of problems. One of the main issues with an old filter and filter cover is that it can prevent the water from draining properly. As the water starts to overflow inside of your washer machine, it’ll continue to spin for far longer than it should.

It should also be mentioned that a broken or old filter is nearly inevitable. LG recommends that you clean your filter once per month at the very least if you want to increase the lifespan of your washer machine. This way, you’ll never have to deal with a broken spin cycle that wastes your time and money.

Malfunctioning Sensors

Although there aren’t too many sensors in LG washers (they primarily run on timers), a broken sensor can be the culprit. If it doesn’t register that the water is drained, it’ll continue to tell the machine to spin forever (or for long periods of time). These sensors are fairly cheap compared to other parts that could be damaged if you don’t replace the sensor.

The best way to know if your LG washer has a broken sensor is if it stays on the spin cycle and there’s no water in the machine. This process indicates that the sensor thinks there’s water, which means it has nothing to do with the filter, clogs, or draining issues.

Clothing Clogs

This might come to you as a surprise, but small pieces of clothing can clog the hoses of your LG washer. That’s right; Socks, underwear, and other small garments can wedge themselves in the hoses, which makes it so the washer can’t drain. Furthermore, it can start to grow mildew and mold, which leads to foul odors.

If you’re worried about this kind of clog, rest assured that a simple cleaning will do the trick. As you hopefully read in the previous section, you can disconnect the filter hoses and clean them relatively easily.

Copyright protected content owner: ReadyToDIY.com and was initially posted on August 6, 2020.

LG Washer Keeps Filling With Water On Spin Cycle


Encountering an issue where your LG washer keeps filling with water during the spin cycle can be concerning and disrupt your laundry routine. This problem may result from various factors, including drainage problems, faulty components, or incorrect settings. Here are the step-by-step solutions to help you resolve the “LG washer keeps filling with water on spin cycle” issue.

  1. Check for Drainage Obstructions:
    Inspect the drain hose and filter for any clogs or obstructions that may impede proper water drainage during the spin cycle. Clean the hose and filter thoroughly to ensure unobstructed water flow.
  2. Verify the Drain Hose Height:
    Ensure the drain hose is installed correctly and positioned at the appropriate height. The drain hose should be higher than the water level inside the washer to prevent backflow during the spin cycle.
  3. Examine the Water Inlet Valve:
    A malfunctioning water inlet valve can lead to continuous water flow during the spin cycle. Inspect the valve for any signs of damage or debris. If necessary, replace the water inlet valve following the manufacturer’s instructions.
  4. Inspect the Pressure Switch:
    The pressure switch is responsible for detecting the water level inside the washer. If it malfunctions, it may not signal the washer to stop filling with water during the spin cycle. Check the pressure switch for defects and replace it if needed.
  5. Verify the Water Level Sensor:
    The water level sensor helps regulate the water level in the washer. If it’s faulty, the washer may continue to fill with water during the spin cycle. Test the sensor’s functionality or seek professional assistance to diagnose and repair or replace the component.
  6. Check the Control Board:
    A malfunctioning control board can cause various issues, including failure to stop water filling during the spin cycle. Inspect the control board for any visible damage or burnt components. If necessary, replace the control board with a compatible part.
  7. Review Spin Cycle Settings:
    Ensure the spin cycle settings are correctly configured. Make sure you have selected the appropriate spin speed and settings to avoid overfilling or improper drainage.
  8. Perform a Washer Reset:
    Try resetting your LG washer to its default settings. Refer to the user manual or LG’s official website for instructions on how to perform a reset.

How to Prevent Your LG Washer from Constant Spin Cycles

Last but definitely not least, it’s time to dive into the prevention methods. It goes without saying that you should always treat your LG washer with care. Failure to do so can result in broken sensors, clogs, and so on.

Here’s a list of ways that you can prevent the never-ending spin cycle:

  • Use washer machine cleaning tablets. They’ll remove the gunk that builds up around the hoses, edges, filters, and other surfaces. Affresh Washing Machine Cleaner is an excellent example of such tablets. It can be used in virtually any washing machine, and all it takes is one cycle to be effective.
  • Check your clothes after every cycle. If there’s something missing, you’ll know that it’s probably stuck in one of the hoses. Getting it out right away will prevent the dreaded nonstop spin cycle. It’s also a great way to keep those socks paired and matched at all times!
  • Reset your LG laundry machine once per month. Do this by turning it off, unplugging the machine for five seconds, and plugging it back in. Start the machine again and you’ll be good to go. A hard reset works by preventing your laundry machine from becoming overworked.
  • Never load too many clothes in the machine. This common mistake always overloads laundry machines. When there are too many clothes inside, it uses a copious amount of water. It might not spin indefinitely, but you’ll have to wait for about ½ an hour longer than you usually would.

As you can see, there are more than enough ways to maintain your LG laundry machine and prevent it from spinning for too long. If you follow these suggestions, along with everything else from this page, you’ll be able to stop the never-ending spin cycles.

Final Thoughts

LG washers are highly durable and long-lasting, so there’s no need to put up with spin cycles that never seem to stop. By removing clogs, draining the machine, and fixing various components, your laundry setup will be as good as new in no time.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on August 6, 2020.

Here’s a quick rundown of the post:

  • Small articles of clothing can get stuck in drain hoses.
  • Excess water is often the cause of spin cycles (remove those clogs!).
  • Clean your LG washer’s filter at least once per month.
  • Check for cracks or signs of corrosion on the filter and drain lines regularly.

Related Articles

LG Washer Door Won’t Unlock

LG Washer Won’t Turn On After Reset: What You Can Do

LG Washer Won’t Fill Up Correctly or Won’t Stop Filling: How to Fix

LG Washer Keeps/Not Spinning/Rinsing

ReadyToDIY is the owner of this article. This post was published on August 6, 2020.

How to Reset LG Washer