Skip to Content

Samsung Universal Remote Not Working (How To Fix/Reset)

We depend on our remote control to operate on an ongoing basis. When it doesn’t, it can be a frustrating problem. What can you do if your Samsung universal remote is not working?

The easiest way to fix a Samsung universal remote is to reset the remote control. After removing the batteries, push the power button and hold it for at least eight seconds. Install fresh batteries in the remote control and it should be reset at this point.

Holding a remote while point at the tv

Since there are very few working parts associated with a Samsung universal remote, there are not many things you should need to check in order to get it working again.

Samsung Universal Remote Not Working (How To Fix/Reset)

Another possibility is that the infrared lights are not working on the remote control. If you have fresh batteries in the remote, try looking at the remote through your smartphone camera.

Open your camera app and then point the remote control to your phone. Press the power button as you are holding the power button and you should see the infrared lights on through the camera display.

One other issue that can occur in some cases is for the sensor to be blocked. Universal remotes are powerful but they also are limited in their scope and distance.

The sensor is located on the lower right-hand side of the TV. You may need to clean it with a microfiber cloth. Make sure that nothing is blocking the sensor so you are getting a clean signal.

Try using the remote control within a few feet of the sensor. If all else fails, you may need to get a new remote control.

Samsung Universal Remote Not Pairing

Holding a remote while point at the tv

One of the more frustrating issues that can occur when we have a Samsung TV is if the remote is not pairing. After all, nobody wants to get up and walk across the room to change channels or the volume manually.

When your remote is not pairing, you should ensure that the control sensor is not blocked. Afterward, you can push the return and play buttons on the remote simultaneously and continue to hold them for a few seconds. At that point, the remote will begin pairing with the TV.

Honestly, there are a number of different issues that can go wrong when you have a universal remote. It’s a wonderful tool when it works properly, but if it isn’t working properly, there is nothing more frustrating.

As far as the control sensor is concerned, it is typically located on the right side of the TV. Look down low for the sensor and if necessary, remove any items that are blocking it. You can also wipe it with a microfiber cloth.

Have you checked the batteries in your remote? Believe it or not, this is a very common issue that can keep the remote from pairing. Always use fresh batteries and make sure that they are installed properly.

One other thing you can try is using any other universal remotes that you have to try and pair with the TV. You can use more than one universal remote and you can connect to more than one TV. If another universal remote is working, the Samsung remote may be faulty.

Samsung Universal Remote Not Available

Holding a remote while point at the tv

Are you getting an error that the universal remote to your Samsung TV is not available? There are a number of issues that can lead to this frustrating problem.

A common reason why your Samsung universal remote is no longer available is if it is not paired with the TV. This can happen from time to time as software updates. Put fresh batteries in the remote and hold down the return and pause button for three seconds simultaneously.

If you try to pair the remote and still get the message that the universal remote is not available, you can try factory resetting the TV.

Open settings, navigate to General, and select Reset. The default pin is 0000. Confirm that you want to reset and the TV will start automatically. Once the startup process has been completed, try to pair the remote again.

One other thing you can do is to check and make sure that the infrared is still working on the remote. Point the remote at a camera phone and look on the screen to see if you can see the two red lights.

If all else fails, you either need to purchase a new Samsung remote or contact customer support.

Samsung Universal Remote Not Working With Cable Box

Holding a remote while point at the tv

If your Samsung remote is not working with the cable box, there are some things you can do to fix it.

To get your Samsung universal remote working with your cable box, you should reset the remote. Pull the batteries and push the power button on the remote for eight seconds. When you reinsert the batteries, the remote should be working.

This is the easiest way to reset a Samsung universal remote but there are times when it may not work. You might have to reset the TV by navigating to Settings > General > Reset (pin is 0000). You can also try using a different universal remote.

It is possible to test the remote and ensure that it is sending out an infrared signal. This is done by opening the camera on your smartphone and pointing it at the remote as if you were trying to take a picture of it.

As you press and hold the power button on the remote control, you should see the infrared lights through your camera’s screen. If you don’t, the remote needs to be replaced or you need new batteries.

Samsung Universal Remote Not Working With Sky Q

Holding a remote while point at the tv

Sky Q is an excellent tool but sometimes, your Samsung universal remote may not work with it.

If your Sky Q box is not working with your Samsung universal remote, you should press the home key on your Sky Q remote. Navigate to Settings> Setup > Remote Control. And do a search.

After the remote is found by the system automatically, you will need to press the 1 and 3 on the remote control simultaneously. You should then enter the code that was given to you.

If you are still having a problem connecting the universal remote with Sky Q, try changing the batteries in the remote or try using another universal remote to see if it works.

Samsung Universal Remote Not Working With Virgin Media

Holding a remote while point at the tv

We would expect Virgin Media to work seamlessly with our Samsung universal remote. What can you do if it is not pairing properly?

To connect your Samsung universal remote with Virgin media, press the lowest right side button on the remote control. When you push up, it will change the channel up. When you push down, it will change the channel down.

The pairing process with Virgin media should take place automatically. At times, however, you may need to reset the remote in order for it to start working. This may require some additional setup on your part.

Copyright protected content owner: ReadyToDIY.com and was initially posted on September 9, 2022.

To reset the Samsung universal remote, remove your batteries and hold the power button for eight seconds. When you reinsert the batteries, the remote should be back to factory settings.

Samsung Universal Remote Not Working With Foxtel

Holding a remote while point at the tv

Are you having a difficult time getting your universal remote to work with Foxtel? There may be a simple solution.

More than likely, your Samsung TV already has the Foxtel app installed. Otherwise, you can go to the Samsung store and install it. After opening the Smart feature, navigate to the app and log in using your unique username and password. At that point, the remote control should start working with it.

Sometimes, it’s not just a problem with Foxtel but there is an issue with many different apps on the TV. If you notice that your Samsung universal remote is not working properly, you should check the batteries and replace them.

It is also important to ensure that there is nothing blocking the sensor on the TV. Sometimes, we may block it using picture frames or other devices. The sensor is located on the lower right-hand corner of your Samsung TV.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on September 9, 2022.

How To Reset Samsung Universal Remote

Holding a remote while point at the tv

When all else fails, it is sometimes necessary to reset a Samsung universal remote and start from scratch. This is not a difficult process, but it is one that must be done properly.

Step 1: Remove Batteries – The first step in the resetting process is to remove the batteries from your universal remote. Set them off to the side.

Step 2: Press Power – With the batteries removed, press and hold the power button for eight seconds. All the lights on the remote control should be off at this point.

Step 3: Reinsert Batteries – If the batteries you removed from the remote are not new, you can replace them. Otherwise, you should replace the batteries with new batteries at this point.

Your Samsung universal remote is now reset and ready to use with your TV and all other devices.

ReadyToDIY is the owner of this article. This post was published on September 9, 2022.

When your Samsung universal remote is not working, check the batteries. Replace the batteries with new and if it still wasn’t working, make sure that nothing is blocking the sensor on the lower right side of the television. Try using the remote in close proximity to the sensor.