The Shark cordless vacuum affords owners the ability to clean areas without having to worry about finding a power outlet or being confined to a certain amount of mobility because of a cord. However, if your Shark cordless vacuum is not working, how can it be fixed effectively?
If your Shark cordless vacuum isn’t working, be sure nothing is obstructing the brush from spinning, that the nozzle is completely engaged, that the dust cup container is empty and free of debris, and that all filters are washed and clean or are replaced with new filters
A vacuum is one of those home items that many tend to forget about in the hustle and bustle of daily life, but when it comes time to get things cleaned up, this item is absolutely essential. If you have a Shark cordless vacuum, you know the mobility that it offers due to the lack of cord that exists on the device. If you have a Shark cordless vacuum and it isn’t working, continue reading on to find the right solution to the exact issue your device is facing.
Shark Cordless Vacuum Not Working
Cordless vacuums are a device that has revolutionized how people are able to clean their homes and workplaces, as they never have to worry about the reach of a cord or the availability of a power outlet where they plan to vacuum. A Shark cordless vacuum gives owners this same versatility while also giving them suction that will get their floors clean without having to worry about going over areas multiple times. If your vacuum isn’t working though, what can be done?
If your Shark cordless vacuum isn’t working, be sure nothing is obstructing the brush from spinning, that the nozzle is completely engaged, that the dust cup container is empty and free of debris, and that all filters are washed and clean or are replaced with new filters.
Depending on the exact issue you are facing, the troubleshooting steps may vary, as not all solutions may work for the same issue. Be sure to identify the problem your device is experiencing, then move forward with finding the most specific fix for the exact issue. To do this, read on in the next sections to find specific issues that exist with shard cordless vacuums and the proper fixes to get the device back into working order.
Shark Cordless Vacuum Brush Not Spinning
When it comes to the various functions of a Shark cordless vacuum, of course, you want the device to have great suction, as this is one of the key components to getting rid of debris on your floors. Another important part of the vacuum though is the brush. The vacuum brush should spin to sweep larger items into the dust cup container, therefore, when this piece is not spinning as it should, your floors are less clean and the need for a fix is of top priority.
If your Shark cordless vacuum brush isn’t spinning, it could be that the nozzle is not engaged. On the vacuum, press down on the nozzle and be sure you hear a click to indicate that it is completely engaged. Once connected, turn the device back on to see if spinning returns.
If the nozzle engages and the vacuum brush still is not spinning, check to make sure that there is nothing preventing the brush from spinning, such as a large amount of hair caught around the brush and extending to other parts of the vacuum or a shoestring. If there is nothing interfering with the mobility of the brush, a broken belt could be the issue. If this is the case, it will need to be replaced, but the process is quite easy and the part is inexpensive.
Shark Cordless Vacuum Not Picking Up/Suctioning
As previously noted, one of the most important functions of any vacuum is its ability to suction. If you have a vacuum that does not have a strong enough suction, you are left going over spots on the floor over and over with only minimal pick up occurring. Shark cordless vacuums are known for their strong suction without the need of a cord, however, if you suddenly notice that your vacuum is no longer picking up or suctioning, what can be done?
When your Shark cordless vacuum isn’t picking up, it’s often because the roller brush is entangled with hair and debris. Turn off and unplug your vacuum, then carefully remove the roller brush. Clean off any tangled hair, strings, or debris. This simple maintenance can restore your vacuum’s suction and efficiency.
Another common issue could be a clogged filter. A vacuum’s filter is like its lungs, and when it’s clogged, the vacuum can’t breathe, let alone clean efficiently. Remove the filter, and if it’s washable, give it a gentle rinse under cold water and let it dry completely before putting it back. Non-washable filters should be replaced periodically to maintain optimal performance.
Lastly, the problem might be related to a full dustbin. Think of it as trying to pour more tea into an already full cup; no matter how much you try, it just can’t take anymore. Emptying the dustbin can often be the simplest yet most overlooked solution. Regularly emptying the bin ensures that your vacuum has room to collect more dirt and debris, keeping your cleaning efforts effective and your vacuum running smoothly.
Shark Cordless Vacuum Not Staying On
The biggest appeal of a Shark cordless vacuum is that users don’t have to be restricted by a certain amount of length given by a connected cord and they are also able to vacuum in any location, no matter if there is a power outlet present or not. Although this is great for mobility and versatility, if you are using your Shark cordless vacuum and it won’t stay on, you know it’s not disconnecting from an outlet, therefore, what might be the cause of this issue?
If your Shark cordless vacuum isn’t staying on, be sure that the battery has been sufficiently charged. If the battery is charged to a working percentage, check that there are no blockages around the brush or within the cavity of the vacuum that could cause the shut down.
If you go through both of the above processes and your Shark cordless vacuum is still not working, the filters could be where the issue lies. Remove the filters from the vacuum and once removed, try turning on the device. If you are able to turn on the vacuum and run it for some time without it turning off again, the filters will need to either be cleaned or replaced completely to ensure that this issue does not reoccur.
Shark Cordless Vacuum Not Turning Off
Of course, when it comes to power problems with a Shark cordless vacuum, one of the first issues people are going to think of is an inability for the device to turn on. Although this is incredibly inconvenient, even more perplexing and interruptive is a Shark vacuum that will not turn off. If you have a Shark cordless vacuum that will not turn off, read on to see what the cause of this issue might be and what you can do to fix it.
If your Shark cordless vacuum is not turning off, it is most likely that the vacuum needs a new power switch. This can be taken care of by calling customer services and they will either send the proper part for replacement or advise you further to resolve the issue you are experiencing.
Shark Cordless Vacuum Making Loud Noise
The Shark cordless vacuum makes some noise when it is running, but it is nothing like the vacuums from the 1970s or 1980s that could nearly bust windows out once they were powered up. The Shark cordless vacuum will be noticeable when on, but it should be a very consistent humming sound, rather than obviously loud ticking or rattling noises coming from the device. If your Shark cordless vacuum is making loud noise, read on.
If your Shark cordless vacuum is making a loud noise, the most common reason is likely due to an object that is jammed within an airway of the device. Disconnect the hose from the vacuum and check inside the entry point of the vacuum for anything that might be lodged.
If you check these areas and you don’t see that there is anything obstructing the pathway to the dust cup holder, it could be that the filter needs to be cleaned or replaced. A filter that is too dirty can obstruct air from flowing as it needs to, which can cause loud noises when larger objects are trying to get into the dust cup holder of your device. Simply remove the filters, clean them if they are reusable, or replace them if they are not with a clear filter.
Shark Cordless Vacuum Light Blinking
Shark cordless vacuums are designed in a way to make the device as accessible as possible to users and this even extends into how the device is able to indicate what might be wrong when issues arise. If you notice that there is a light blinking on your Shark cordless vacuum, there are a slew of different reasons it might be doing so. To see what might be the cause of your Shark vacuum light blinking, continue reading below.
If your Shark cordless vacuum has a light that is blinking, this could mean that the battery needs to be charged, the battery needs to be replaced, there are issues with the brush roll function, an improperly attached nozzle, or a belt that needs to be repaired or replaced.
Copyright protected content owner: ReadyToDIY.com and was initially posted on March 6, 2022.
One of the most common reasons for a flashing light on a Shark cordless vacuum though is that the device simply needs to be charged. If you have had your vacuum charging and the light is still blinking, this could be an indication that the vacuum has not charged long enough to be able to run at full function, which will result in poor brush roll speed as well as overall suctioning ability.
Shark Cordless Vacuum Keeps Getting Clogged
There are few things more frustrating than running a vacuum and constantly having to deal with a clog that interrupts the suction of the device. Cloggs happen on occasion, as you might encounter items that are too big for your device to be able to handle, but if your vacuum is getting clogged over and over, what might be the cause of this and what can be done to stop it from continuing to happen?
If your Shark cordless vacuum keeps getting clogged, be sure you are not continuing to vacuum up large items, as large debris should be swept up before vacuuming to prevent clogging. You should also check to make sure that your filters are clean, as dirty filters will prevent proper airflow.
Shark Cordless Vacuum Keeps Spitting Out Debris
When it comes to the proper function of a Shark cordless vacuum, this device should be able to pick up debris with ease and should certainly never spit debris out from beneath it. If you are vacuuming and notice that your Shark vacuum is spitting debris behind the roller and out from under the vacuum, read on to see what is likely causing this issue and see what you can do to get it to stop.
If your Shark cordless vacuum keeps spitting out debris, this is most likely caused by a clog in the device. Check for any clogs behind the brush roller, in the dust cup air duct, or within the hose. If no clogs exist, be sure all filters are clean to allow for proper airflow and suction.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on March 6, 2022.
If your Shark vacuum is not working, there could be an obstruction within the hose, the brush roller, or in the dust cup air duct. Issues may also be caused by a need for proper charge, clean filters, or a nozzle that has not been fully engaged which will prevent the vacuum from operating properly.
Related Articles
Shark Navigator Vacuum Not Working
ReadyToDIY is the owner of this article. This post was published on March 6, 2022.