In general, something in the drip tray is causing the odor, there are invisible particles causing smells on the surfaces of the compartments, trays, racks or walls of your fridge, or something spilled or leaked and the smell is stored in the ice, producing an odor during the defrost cycle.
If you need to reset your GE refrigerator, you can do so by disconnecting it from the power for five minutes and reconnecting it. This can be done by unplugging it from the receptacle or by turning off the circuit breaker. In either case, once power is reestablished, it should be fully reset.
If your GE fridge isn’t cooling, but the freezer works, the likely culprit is a broken door hinge. Other causes include frozen coils or a malfunctioning evaporator fan. In the majority of cases, you can fix the problem without a professional’s guidance.
The refrigerator/freezer contains an electronic display board, which executes several essential jobs. It adjusts and monitors the internal temperature, activates and deactivates the fan’s motor, and more. If this display board doesn’t work correctly or becomes damaged, it can cause some rather severe issues.
To clean your GE refrigerator water dispenser, you will first remove the dispenser spill shelf by lifting it out of the spill shelf compartment. Once you have this removed, fill a large bowl with undiluted vinegar and place the spill shelf into the bowl of vinegar while allowing it to soak for around 30 minutes. You will then remove the spill shelf from the vinegar and wipe away any deposits with a cloth.
General Electric (GE) sells premier household appliances, including refrigerators and freezers. For most models, the user controls the temperature through a touch display, and the …
A GE refrigerator that’s not working or cooling after a power outage most likely has a bad control board. During power failures, the control board can malfunction, causing the freezer not to cool or have an inoperative display. To correct this, replace the control board at home.
Remove the ice from the drain hole with a piece of stiff wire or similar. Fill a syringe with cold water. Place the end of the syringe deep into the draining hole and force the water into the hole. This action should remove any remaining ice from the drain, thus unclogging it.
Some models of GE refrigerators come with an ice dispenser to make cooling down your drinks more convenient. The touch panel manages the dispenser and …
GE refrigerators have been reliable cooling devices serving American households since 1933. Issues with GE appliances are relatively rare. But like other electronics, parts in …
If the door is locked, there’ll be a green light on the control panel above the lock button. In which case, just press it to unlock it. However, the control can malfunction and it can be locked permanently. When this happens you want to turn it off at the wall and it will open.
If your GE refrigerator freezer light is blinking, there may have been a small problem occur within your control board that only needs a reset in order to fix itself. To do this, unplug your refrigerator from the wall and leave it for 30 seconds before plugging it back in. If the freezer light is still blinking after the reset, unfortunately, service is required and you should schedule an appointment with a repairman to fix the issue.