Skip to Content

Frigidaire Dishwasher Beeping (How To Fix)

dishwasher in the kitchen

Are you having a problem with a Frigidaire dishwasher beeping? This is an issue that is trying to tell you that something is wrong and sometimes, it’s trying to tell you that something is right.

Here are some common reasons why a Frigidaire will beep.

Power Failure: If there is a drop in power of at least 10%, the dishwasher will beep and it will show the PF error code.

You can fix this problem by ensuring that the dishwasher has sufficient power. If something else is using power from the same circuit, unplug it until you are done using the dishwasher.

Rinse Aid Dispenser: If the rinse aid dispenser in the dishwasher is low, the dishwasher will beep and it will display the LO error code.

The easiest way to fix this problem is to refill the dispenser.

Door Closed: the Frigidaire dishwasher may beep to indicate that the door is not latched properly. If that is the case, it will also show the CL error code.

To fix this problem, you may need to open the door and remove any obstructions that are keeping it from sealing properly. In some cases, you may have to replace the door latch to keep it closed.

There may be other issues that have a displayed error code as well. These can be found in your Frigidaire owner’s manual.

Troubleshooting a Beeping Frigidaire Dishwasher

dishwasher in the kitchen

One of the appliances we tend to use almost every day in our homes is the dishwasher. It is a faithful machine, but what do you do when it starts beeping? If your dishwasher is beeping, it could be indicating a problem with the appliance.

Start by checking for any error codes or warning lights on the control panel. Consult the user manual to identify the problem and follow the recommended steps to resolve it.

Next, check the water supply and ensure that the dishwasher is receiving an adequate supply of water.

Additionally, check the drain hose to make sure it is not clogged or kinked, which can prevent the dishwasher from draining properly.

Finally, check the door latch to ensure that it is fully closed and engaged.

Although it would be handy if we could fix everything quickly and easily, we realize that is not often the case. Often, we have to look for additional possibilities of what may be going on.

First of all, it is important to note that modern dishwashers are often made to beep when the cycle is over. This was always the case, but newer dishwashers may play a melody. If you hear this, nothing is likely wrong, the cycle has just ended.

On the other hand, you may hear a series of beeps that are very specific. These may be perhaps 5 short beeps followed by a pause before the 5 short beeps happen again.

If that is the case with your dishwasher, you can often look at the owner’s manual, even online, and find the solution. Dishwasher manufacturers typically try to make it easy to find the cause of any problems that occur.

The following is a short list of possibilities. Try these first and then look for your model below to see if it offers additional solutions.

Reset the Dishwasher: This is something that can work with almost every dishwasher to stop the beeping. It isn’t going to correct the issue in many cases, but if it was a temporary glitch, it will work well.

Since most of us don’t have easy access to the receptacle behind the dishwasher, you will have to turn it off using the breaker box. Find the breaker associated with the dishwasher and turn it to the off position.

After waiting approximately five minutes for all of the residual energy to dissipate, you can turn the breaker back on again. At this point, the beeping should stop.

If the beeping continues or starts again, you may need to do some repairs to fix it completely.

Closed the Door: One of the most common reasons why a dishwasher beeps is because the door is not fully closed. If the door is not latched properly or if it is partially open, a safety measure will cause the dishwasher to beep as a warning.

If the dishwasher door is not closing properly, you may need to replace the latch. Otherwise, make sure there are not any obstructions that are stopping the door from sealing properly.

Water Supply: In order for the dishwasher to operate properly, it has to have a ready supply of water. If there is not sufficient water, then the dishwasher will be to alert you to this issue.

Inspect the inlet valve to make sure it is open fully and the water supply is flowing.

Drainage System: On the other end of the spectrum, you have the drainage of any water from the dishwasher. If the drain hose is clogged, kinked, or otherwise not allowing water to drain, the dishwasher will beep.

In a worst-case scenario, you may have to remove the drain hose and rinse it out with a high-pressure garden hose. That should push any obstruction out of the way.

Installation: A beeping dishwasher may sometimes be associated with improper installation. The dishwasher should be installed securely and the screw in the upper center of the face of the dishwasher should finish the mounting.

Child Lock: If the child lock was accidentally set, this is something that may be the problem. You will have to check the owner’s manual to determine how to turn the child off on your model dishwasher.

These are the most likely issues associated with any dishwasher beeping problems. We will discuss more below in the manufacturer-specific section.

Before you work on the dishwasher, it is important to consider your safety. This is not only true when it comes to working on electrical parts, you will be working with potentially hot water and sharp objects.

Always make sure you turn off the power to the dishwasher and ensure that nobody is going to reconnect the power while you are working.

I have worked on many dishwashers and this is a step in the process that should not be underestimated. In many cases, somebody turns on a switch or flips a breaker, not realizing the danger they are putting you in.

A pair of Cutlass gloves will go a long way in helping to keep your hands safe while you are working. Even a pair of all-purpose gloves will help well, as they offer a level of protection and dexterity.

Don’t underestimate the benefits of using safety glasses. Most people tend to ignore this possibility, but it really is something that should be used on every DIY project.

A good pair of new safety glasses will not impede your vision. What it will do is protect your eyesight from any problems that may occur.

You should also block off the area so no pets or small children can get in. This is something that only takes a moment but it can avert a potential disaster.

Related Articles

Frigidaire Dishwasher Not Draining Properly

Frigidaire Dishwasher Not Drying

Frigidaire Dishwasher Door Open/Close Problems

Copyright protected content owner: and was initially posted on August 10, 2023.

Frigidaire Dishwasher Not Working/Cleaning/Washing

How To Reset Frigidaire Dishwasher

Frigidaire Dishwasher Light Flashing

How To Fix Frigidaire Dishwasher Stuck On Wash/Clean Cycle

Frigidaire Dishwasher Fills But Does Not Wash (How To Fix)

Copyright article owner is for this article. This post was first published on August 10, 2023.

Frigidaire Dishwasher Not Filling With Water (How To Fix)

Frigidaire Dishwasher Top Rack Falls Off (How to Fix)

Frigidaire Dishwasher Top Rack Falling Off Track (How to Fix)

Frigidaire Dishwasher Making Loud Noise (How To Fix)

Frigidaire Dishwasher Keeps Stopping (How To Fix)

ReadyToDIY is the owner of this article. This post was published on August 10, 2023.

Frigidaire Dishwasher Keeps Draining (How To Fix)