Vacuuming is a fast and easy way to get your house clean. But over time, it may incur damage from the usual wear and tear. They’re not necessarily cheap too, so immediately replacing it is not always possible. How do you fix a vacuum that keeps clogging?
Keep the hose free of any obstructions. Large pieces of debris can get stuck when suctioned, causing a clog. Instead of forcing them with the vacuum cleaner, pick them out and throw them away. Putting a net over the tip of the hose can help filter out the large pieces of debris.
Keep in mind that vacuum cleaners are intended to suction clean dirty and dusty surfaces. They are not really meant for clearing debris and other small items that may be on the floor.
How to Unclog Hoover Vacuum Keeps Clogging
The Hoover vacuum is constantly listed among the top vacuum brands. It’s known to last as long as eight years, making it a good investment. However, this can only be maximized if you take good care and proper maintenance.
To unclog a Hoover vacuum, check that the brush and hose are clear of any blockages. Sometimes, all the other components are fine, but there’s still a clog. The problem may be with the belt, so take a look and find out if it needs replacing.
Hoover Brush is Stuck
A Hoover vacuum may be clogged not because of debris in the hose, but because of the brush. When the brush gets stuck, turn the vacuum off and unplug before checking what the problem is. Sometimes, sharp objects can damage the brush components, leaving it unable to move.
To figure out what’s causing the problem, first check that you’re using the correct floor setting. If it’s all good, and you know the motor is working fine, then it’s time to check the brush to clear it of debris.
It’s also possible that the belt has been snapped off because of wear and tear, which is why the Hoover brush became stuck. If this is the case, get a replacement for it.
Clogged Hose and Filter
The usual suspect in a vacuum malfunction is a clogged hose or filter. To unclog a Hoover vacuum, remove the hose by rotating the pipe counterclockwise. To detach completely, pull down the hose.
Remove the clog in the hose by pushing another long piece into it. If you don’t have a stick or rod that can fit, you can straighten a wire hanger. Push the wire into the hose until it goes smoothly the entire way to be sure it’s been unclogged.
Copyright protected content owner: ReadyToDIY.com and was initially posted on January 13, 2023.
The pipe connectors could also have debris stuck in them, so do the same for these parts too. Tap the debris loose if necessary.
The Hoover vacuum typically features a foam filter. It’s usually placed right under the dust bin, like a small cartridge. Pull it out and wash it clean. Make sure it’s thoroughly dry before putting it back in.
Four Reasons Why Your Hoover Vacuum Keeps Clogging
Vacuums don’t simply get clogged on their own. In order to prevent it from constantly getting clogged, you need to know what’s causing the problem.
The most common reason your vacuum keeps getting clogged is that it suctions large pieces of debris that don’t fit well in the hose. You can usually hear it when this happens because the hose makes a gurgling sound. It could also be that the bag is full because it’s not cleaned.
Suctioned Large or Irregular-Sized Objects
It’s ideal to pick up the large items first off the surface you’re cleaning before starting the vacuum. This way, you minimize the risk of catching large or irregular-sized objects that may cause the vacuum to clog.
In some cases, the item may have sharp edges that can tear the inside of the hose as it’s being forced into the vacuum, causing more problems.
Vacuum Hose or Bag is Full
Obstructions or large debris are not the only things that can cause clogs. Sometimes, it’s a simple matter of leaving the bag or hose full. Even dust particles can lead to a buildup if not regularly disposed of.
Hair is also a usual cause of clogs, much like they tend to do in the drains. To be safe, make sure to empty the vacuum of its contents as soon as you’re done using it. This way, you’re always sure that the vacuum is empty, and so minimizes the risk of clogging.
The Vacuum Suctioned Liquid
Sometimes, it can’t be helped that the vacuum rolls over wet surface. While this shouldn’t cause a problem with the equipment directly, it could cause the dust and particles inside the bag to get wet. Once they dry up, they can turn into a hardened mass, which is what’s going to cause the clog.
The damage can get worse over time, especially if it is left unattended. The hardened mass of dust can become stuck on the equipment and can be difficult to remove. If this leads to more buildup, then the inside of the vacuum itself will start causing problems.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on January 13, 2023.
Other Components are Dirty
The filter and rollers are the other essential components of a vacuum. If this is the case, then the dirt from these parts will simply be sent back into the hose, which only adds up to the debris, thus causing the clog.
Again, the simple solution to this is to make sure these parts are clean and cleared of dust particles and hair strands.
Related Articles
Hoover Vacuum Won’t Suction/Pick Up Dirt/Work
Hoover Vacuum Brush/Roller Not Spinning
ReadyToDIY is the owner of this article. This post was published on January 13, 2023.