Skip to Content

How To Reset A Refrigerator

Out of all of the appliances we have at the home, the refrigerator is probably the one we use most. Every once in a while, it may experience problems, and resetting the refrigerator might be needed.

To reset a refrigerator, start by unplugging it from the power outlet. Wait for about 2 minutes to allow the electrical charge to clear out of the fridge’s system. Then, plug it back in. This simple reset can often solve minor issues like cooling irregularities or electronic glitches.

In addition to the basic power reset, some refrigerators have a reset button or a specific procedure for resetting. Check your refrigerator’s manual for any specific instructions. For digital models, navigating through the settings menu might offer options to reset factory settings or troubleshoot. It’s also a good idea to check if the refrigerator needs time to return to its normal operation mode after the reset, as some models may take a few hours to stabilize.

Modern steal refrigerator

Most people tend to look at a refrigerator as being a rather simple appliance. Although it may seem simple on the outside, there are many high-tech features on modern-day refrigerators.

This would include everything from making and dispensing ice up to connecting to the Internet. With more and more things taking place within the refrigerator, it is more likely for problems to occur.

There may also be times when it is necessary to take a specific action in order to reset a refrigerator. This is done on a case-by-case basis, depending upon the part of the refrigerator being reset and the model of the refrigerator.

How To Reset A Refrigerator

Before we discuss some of the different models and how to reset them, it’s a good idea to discuss some of the reasons why they may need reset. In addition, you need to consider the possibility that it doesn’t need reset but rather, it needs to be repaired.

Showroom Mode – if the refrigerator is new or if it has started acting strangely, it may be in demo mode. This is a mode that is commonly set when it is in the store and is being demonstrated to others.

Each refrigerator will have its own method of getting out of demo mode. It is typically a matter of pushing a series of buttons in order to release demo mode and put it into regular operating mode.

Power Outage – Have you recently experienced a power outage? This can also cause problems.

One of the issues with a power outage is the fact that many refrigerators may not start properly. Perhaps the lights only flickered for a moment, causing the refrigerator to go down and up very quickly.

In addition, a power surge sometimes goes along with a power outage. This can be a serious problem that can cause internal damage to the refrigerator that needs to be repaired.

It is difficult to know for certain if you had a power surge or not. If you are experiencing problems with the refrigerator and resetting the refrigerator doesn’t help, then a power surge may be to blame.

Sabbath Mode – Many modern refrigerators have a setting known as Sabbath mode. This may stop the refrigerator from operating on the Sabbath.

In most cases, you will not know about the Sabbath mode unless you need to set it and begin looking through the manual for the settings. It might even come as a surprise to you that it is needed.

Check the manual for information about Sabbath mode. It may just save you a costly visit from a technician.

Specific Problems – Some problems may be fixed by resetting the refrigerator but others may not. This would include things such as the ice dispenser not operating or perhaps the interior light not working.

You can always try resetting the refrigerator to see if it works but it is not always going to be the first line of defense when it comes to repairing what has gone wrong. Sometimes, you just need to think outside of the box and look for the cause of the issue.

Error Codes – If you have a modern refrigerator with a control panel, it may sometimes give you error codes. These codes indicate that something is wrong with the refrigerator.

In most cases, an error code will be cleared if you reset the refrigerator. That doesn’t mean, however, that you have fixed the problem. More than likely, the code will show up again.

Check your user manual for information about the error code and take appropriate action.

How To Reset A Whirlpool Refrigerator

Woman thinking behind the refrigerator

As is the case with many types of refrigerators, a whirlpool refrigerator requires specific actions if you need to reset it.

To reset a Whirlpool refrigerator you will need to disconnect it from the power source. This can be done by unplugging the refrigerator or turning off the circuit breaker. After waiting 10 minutes, reestablish the power and give it a few minutes to restart. You can then check the refrigerator to make sure it is cooling.

Something else you can do to ensure that it has reset properly is to check the control panel. Try a few different functions on the control panel to see if it is working properly.

A whirlpool refrigerator does not always need to be reset. In fact, it is sometimes better to repair the issue individually rather than reset the entire device.

A quick reset may help to restore the functionality of the control panel or the refrigerator. It’s a good place to start if you aren’t sure what is wrong and it isn’t operating properly.

How To Reset A Samsung Refrigerator

Couple opening the refrigerator

If you have a Samsung refrigerator, you may be looking for the reset button. It doesn’t exist, but it is still possible to reset the appliance. How to Reset Samsung Refrigerator

Modern-day Samsung refrigerators can be reset by pressing a combination of buttons on the control panel. For the most part, they don’t have a dedicated reset option, and each refrigerator may have its own method of restarting the appliance. Try pressing the power cool and power freeze buttons at the same time for five seconds as this may reset the refrigerator.

Like many refrigerator manufacturers, Samsung does not automatically default to a reset in order to fix problems. If you reset a refrigerator, you are resetting the history and resetting the settings.

If you do have certain problems and are directed to do so by the manufacturer, however, you may decide that performing a reset is best. After going through the specific steps for resetting your Samsung refrigerator, you will hear a chime and the refrigerator will start again.

After you reset a Samsung refrigerator, you will have to reestablish a connection to the network and change the settings on the clock.

You might also find it necessary to reset the Family Hub. This can be done under settings, selecting ‘About Family Hub’ and then choosing ‘Factory Data Reset.’ After you reset, all data will be deleted.

How To Reset An LG Refrigerator

LG modern steal refrigerator

Are you having problems with your LG refrigerator? Resetting it may solve the issue. How to Reset LG Refrigerator

You can reset an LG refrigerator by unplugging the refrigerator or turning off the circuit breaker. It only takes 30 seconds without power for the refrigerator to reset and then the power can be reestablished. After the compressor starts running, allow the refrigerator to continue to run for 24 hours and the issue should dissipate.

On some newer LG refrigerators, there may also be an option that allows you to reset the unit to operational mode. This is done by looking inside of the left door and holding down the lock button (or ice plus button) and the refrigerator button simultaneously.

After holding those two buttons down for five seconds, you will hear an audible chime. The refrigerator should turn on and initialize, indicating that it has been properly reset.

How To Reset A Maytag Refrigerator

Matag modern steal refrigerator

Maytag refrigerators are known for being dependable but they still may need reset at times. How to Reset Maytag Refrigerators.

Maytag refrigerators do not have a reset button but you can use a key combination on the control panel to reset the settings and flush out the memory. The key combination may be different from one unit to another so you will have to check your user manual for more instructions.

In some cases, you can reset the refrigerator by holding down the lighting button and energy save button simultaneously for 10 seconds. There may also be symbols above the buttons that indicate which ones you should press.

One other method of restarting a Maytag refrigerator is to cycle the power. Disconnect to the refrigerator by unplugging it or turning off the circuit breaker. After 10 minutes, turn the refrigerator back on again.

You can ensure that the refrigerator was reset properly by checking the function of the control panel or making sure it is cooling.

How To Reset A Kenmore Refrigerator

Woman opening the refrigerator

Is your Kenmore refrigerator acting up? You may be able to fix it by resetting it. How to Reset Kenmore Refrigerator.

Modern Kenmore refrigerators are reset by pushing the home and ultra ice button simultaneously. Hold those two buttons down for five seconds and the refrigerator controls will restart. You can then unplug the refrigerator and plug it back in to fully reset it.

In some models, you may not have a combination of buttons to press. This is also true on older Kenmore refrigerators that don’t have a reset option.

Doing a hard reset by cycling the power is the best option to reset the unit and get it working again. This is done by first turning off the power.

If you have access to the receptacle, you can simply unplug the refrigerator. On the other hand, you may have to go into the breaker panel and turn off the refrigerator by flipping the circuit breaker.

After turning off the power, you should allow at least 10 minutes for the power to dissipate within the unit. You can then reestablish power and after waiting for the refrigerator to start up again, it should be fully reset.

How To Reset A Ge Refrigerator

Woman opening the refrigerator

If you are having problems with a GE refrigerator, a quick reset can resolve them. How to Reset GE Refrigerator.

Resetting a GE refrigerator requires you to turn off the power and reestablish it again. This will fully restart the refrigerator and clear any issues that may be occurring. If you have access to the receptacle, you can unplug the refrigerator from the wall. Otherwise, turn off the circuit breaker for five minutes before reestablishing power.

Although it may be necessary, at times, to fully restart a GE refrigerator there may also be issues that can be addressed individually. This can include issues such as the icemaker or the control lock.

If the ice maker is not working properly, there is a shut-off switch on the ice maker that can be flipped. You can then work the shut-off arm three times to reset it. Make sure you turn the switch back on again.

If the control lock is not working properly, you can unplug the refrigerator and plug it back in again. If it still doesn’t work, you may need to contact customer service for more information.

How To Reset An Amana Refrigerator

Woman opening the refrigerator

Is your Amana refrigerator experiencing difficulty? In some cases, resetting it may fix the issue.

You can reset power to an Amana refrigerator by turning the unit off completely. This is done by unplugging it from the wall or flipping the circuit breaker to the off position. After waiting 10 minutes, you can reestablish the power and give it a few minutes to restart. Check the control panel or the cooling function to ensure it is operating.

Most Amana refrigerators do not have a dedicated reset button. On some new models, a button may be included but that is not always the case.

If you do have a reset button available, you may need to press and hold it for a few moments. This will clear up the issue without having to unplug the refrigerator.

If the refrigerator stopped working and it is on a GFCI breaker, you may need to reset the breaker or the receptacle. Be aware that, in certain cases, a GFCI breaker powers several receptacles.

Here’s a more detailed article regarding resetting your Amana fridge.

How To Reset A Frigidaire Refrigerator

Woman opening the refrigerator

If your Frigidaire refrigerator is not working properly, you may want to reset it. This can bring it back to the default settings.

You can reset a Frigidaire refrigerator by navigating to the default settings in the control panel. Press and hold the reset button for three seconds and all of the refrigerator settings will revert to the factory default. You can then reset anything necessary for the daily operation of your Frigidaire refrigerator.

Sometimes, you need to have a more thorough reset and this is done by disconnecting the refrigerator temporarily. Some people will be able to unplug it from the wall but if you don’t have easy access to the receptacle, you can turn the circuit breaker off.

You will have to wait at least five minutes before reestablishing the power. At that point, your Frigidaire refrigerator should be operational again.

How To Reset A Kitchenaid Refrigerator

Kitchenaid modern steal refrigerator

KitchenAid is a leader in kitchen appliances. Even so, there are times when a KitchenAid refrigerator needs to be reset.

Resetting a KitchenAid fridge is necessary when the control panel is not responding. You can reset the power by turning off the circuit breaker or unplugging the refrigerator for 10 minutes. After you reestablish the power, check the function of the control panel. You should also ensure the compressor is working and cooling the refrigerator.

Copyright protected content owner: and was initially posted on November 25, 2021.

There may be other options on certain KitchenAid refrigerators that need to be considered. Some of these options will control the refrigerator in more specific ways.

Keep in mind that restarting the refrigerator resets all of the settings. It may be necessary to re-establish a connection to Wi-Fi or to reset the clock after doing a major reset.

Top Reasons Why You Need To Reset Your Refrigerator

Woman opening the refrigerator

There may be times when it is necessary to reset a refrigerator. There may also be times when it is not the best choice.

The most common reason why people reset a refrigerator is that the control panel is not functioning properly. It may have become unresponsive or certain aspects of the control panel may not work as expected. Resetting the refrigerator often brings back the full function of the control panel.

Some people will also reset a refrigerator to clear an error code. Some of those error codes occur specifically because of problems and need to be addressed individually.

Copyright article owner is for this article. This post was first published on November 25, 2021.

If you clear the error code but do not fix the underlying problem, it could become a bigger problem. More than likely, the error code will continue to show up.

If the refrigerator shut down temporarily due to a power outage at the home, it may not have restarted properly. Restarting the refrigerator by disconnecting it and reestablishing power after five minutes may allow it to restart fully.

There are also many problems that are not fixed by resetting the refrigerator. This would include problems with the ice maker not dispensing or if the vents have become frozen or blocked.

If you reset the refrigerator and it does not fix the problem, look for a more specific way to repair it.

Since most refrigerators don’t have an automatic reset function, it is necessary to disconnect the refrigerator from the power source and reconnect it again. This is done by unplugging the refrigerator or turning the circuit breaker to the off position. Wait at least five minutes before reestablishing power again. This will fully reset the refrigerator.

ReadyToDIY is the owner of this article. This post was published on November 25, 2021.

Related Articles

Refrigerator Not Working/Cooling