Skip to Content

What Can You Use to Cut Wall Tiles? (How to)

Wall tiles are one of the most common furnishings in any home, office, or general building. They come in different styles and designs to suit any building’s architecture and give a classy and stylish feel to the interior of any room.

To properly cut wall tiles, tools such as the Dremel, grinder, tile cutter, wet saw or jigsaw can be used. . However, before using these tools, determine where the cut needs to be made by measuring and marking the glazed side of the tile.

Throughout this article, we promise to answer questions you may have relating to the tools you can use to cut wall tiles and how to cut wall tiles like a pro.

What Can You Use to Cut Wall Tiles?

As already stated, when you need to cut wall tiles a variety of tools ranging from an angle grinder to a circular saw. However, you should be made aware that the wall tile cutting tool choice will depend on a variety of factors ranging from the shape you intend to cut into the tile and the wall tile types.

The table below explains this better.

Wall Tile Type

Recommended Wall Tile Cutters

Ceramic Tiles

  • Snap cutter
  • Grinder, Dremel
  • Wet saw
  • Tile cutter

Porcelain Tiles

  • Snap cutter
  • Wet saw
  • Grinder
  • Tile Cutter

Glass Tiles

  • Glass cutter
  • Grinder
  • Wet Saw

Marble Tiles

  • Snap cutter
  • Grinder
  • Dremel
  • Wet saw
  • Tile cutter

Can You Use Dremel to Cut Wall Tile?

You can use the Dremel tool to cut wall tiles. The Dremel tool has attachments and accessories designed for a variety of cuts. One such tool is the Dremel 562 tile cutting bit feature designed to cut ceramic wall tiles.

Copyright protected content owner: ReadyToDIY.com and was initially posted on November 29, 2022.

How To Use Dremel to Cut Wall Tile

If you are looking to cut wall tile, using the Dremel cutting tool, these basic steps explain how to use the Dremel properly:

Step 1: Prepare your tools by ensuring all safety measures are in place; refer to the Dremel owner manual for attachments and more instructions on assembling the tool bits.

Step 2: Measure and mark the line or shape you wish to cut and where the cut needs to be.

Step 3: Secure the wall tile in place to prevent any damage or misalignment.

Step 4: Plug in your Dremel tool and position it at the beginning of your mark spot.

Step 5: Use both hands to guide the tool across your marked line or shape to begin your cut.

Step 6: To prevent your tiles from damaging and your cutting tool from wearing out prematurely, ensure you do not apply excess pressure on your wall tile and cutting tool.

Can You Use Grinder to Cut Wall Tile?

Using the grinder to cut wall tile is recommended. This powerful cutting tool is perfect for cutting smooth surfaces, like those of wall tiles. All you have to do is ensure you pick the appropriate grinding wheel.

How To Use Grinder to Cut Wall Tile

To use a grinder, you must first understand that cutting wall tiles into different shapes might require different cutting discs. Each disc serves different purposes.

The disc types are: Flap disc, wire wheel, strip disc, diamond disc, cut-off wheel, and ceramic sanding disc.

Cutting a wall tile with a grinder can be done in four easy steps:

Step 1: Determine what blade/disc would be best suited to cut through your tile by gauging the work intensity that matches the tile density.

Step 2: Measure and mark the line or shape you wish to cut.

Step 3: Ensure you properly position your grinder on your marked line or shape and secure it, so it stays in place.

Step 4: When all safety measures are in place, proceed with the cut. Cool down the grinder every now and then to prevent it from overheating or wearing out prematurely.

Can You Use Tile Cutter to Cut Wall Tile?

As the name suggests, a tile cutter is designed for cutting through tile, wall tiles included. It is recommended because it is an inexpensive cutting tool with a straightforward application. It also offers a safer working process.

How To Use Tile Cutter to Cut Wall Tile

To begin cutting wall tiles with a tile cutter in no time, follow these basic steps:

Step 1: Use tape and marker to measure and mark out the line or part of the wall tile you need to cut.

Step 2: Place your tile properly on the tile cutter by resting it on the fence at the edge of the cutter.

Step 3: Line up the mark on the wall tile to the wheel on the tile cutter.

Step 4: When your wheel is in place, press down firmly on the handle and slide forward across the wall tile to score a line.

Step 5: If your tile cutter does not have an all-in-one breaker built, secure both sides of the wall tile and apply slight pressure until it snaps.

It is important to note that a tile cutter is best for straight cuts rather than shape cuts.

Can You Use Wet Saw to Cut Wall Tile?

Using a wet saw to cut wall tile is possible and achievable, as the stationary powered saw is designed for cutting delicate material like ceramics and tiles.

How To Use Wet Saw to Cut Wall Tile

Step 1: Set up the cutting tool and ensure water is in the trays to prevent the blades from overheating.

Step 2: Measure and mark out the line or part of the wall tile you need to cut.

Step 3: Now adjust the fence until the blade aligns with the drawn mark.

Step 4: Place your tile properly in the wet saw by positioning the widest part of the tile between the fence and the blade.

Step 5: Press the guard over the blade and turn on your wet saw. Start your cut but do not force or speed up the cutting process; let the machine work at its own pace.

Can You Use Jigsaw to Cut Wall Tile?

Although, you can use a jigsaw to cut a wide range of materials; to cut wall tiles, you would need a jigsaw equipped with a special abrasive carbide edge blade or diamond-tipped blade. These blades are inexpensive and easily obtainable.

How To Use Jigsaw to Cut Wall Tile

The steps below explain how to use a jigsaw to cut wall tiles.

Step 1: Measure and mark the line or shape you need to cut.

Step 2: Place your tile properly on your cutting surface and ensure to secure your wall tile with a clamp.

Step 3: After lining up the mark on the wall tile with the jigsaw blade, proceed with your cut.

Step 4: Cool and lubricate the blade with water now and then as you make the cuts. You can use a sprint bottle or your hand to sprinkle water on the blade.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on November 29, 2022.

How To Cut Wall Tile

Here is a quick run down on the proper steps to cutting wall tile using these different tools:

Step 1: Before you start any cutting operation with the tool of your choice, read and adhere to the safety instructions and user manual.

Step 2: Ensure that the blade of your cutting tool is suited for cutting through your wall tile.

Step 3: Measure and mark your desired length and shape on your tile.

Step 4: You should place your tile in a horizontal and stable position.

Step 5: With correct and protective measures in place, commence the cut.

Step 6: Take breaks when the need arises to cool off cutting tools.

Step 7: Check the edges to see if it was a clean cut. If not, use a file to smoothen the edges.

Related Articles

What Can You Use To Cut Mirror Tiles? (How To)

How To Cut Roof Tiles

ReadyToDIY is the owner of this article. This post was published on November 29, 2022.

What Can You Use to Cut Slate Tile? (How to)