You can add Paramount Plus on Xfinity with a compatible streaming box and any level of Xfinity internet service. Check the Paramount Plus website for specific model information. You will also need to purchase a monthly or yearly subscription to Paramount.
A soft reset is done by disconnecting the power or pressing the on/off button, and then connecting the power again. This won’t revert the settings back to default. A factory reset is done by pressing the button labeled either ‘reset’ or ‘WPS/RESET’. But, returns all the settings back to default.
To reset TP-Link Wi-Fi Extender devices, locate the reset button pinhole on the side of the extender. Insert a paper clip to press and hold the reset button until all the indicator lights turn on for a moment. Once you have done this, the range extender should be reset to factory default settings.
To reset your Xfinity WiFi/router, locate the ‘Reset’ button on the box or router. When you have located this button, press and hold it for five consecutive seconds. Once this time has passed, release the reset button and the process will start and complete fully within a matter of minutes.
To reset Cox WiFi/Router unplug both the modem and the router from their power sources. When they are both completely without power, plug the modem back in and wait for the LED lights on the device to light up. Once they are lit, plug the router back in and it will have been reset.
To reset your Spectrum WiFi/Router, start by unplugging the modem first. After this has been unplugged, turn off the router, plug the modem back in, wait for two minutes, turn the router back on, and wait for two minutes more. This will reset your Spectrum WiFi connection.
To reset your Verizon router to factory settings, you’ll first need to find a paperclip, safety pin, or something else that you can use to press the “Reset” button on your router. You can find the button on the router in between the coaxial connection and the Wan port.
A soft reset is done by unplugging the power, but some Netgear routers also have a power button. Both work to do a soft reset. A factory reset is done by holding down the factory reset button for 7 seconds. A bent paper clip is required to press it as it’s located inside a pinhole sized hole.
To reset a WiFi router, the process may vary depending on your internet provider, but a general reset includes disconnecting your router from power, allowing it to sit for 60 seconds, plugging it back in, then giving it ample time to reboot before reconnecting to the network.
If your Netgear router lights aren’t on, blink, or won’t work, you should turn it off, disconnect the copper wire from the back, plug it into a phone line, and dial a number to reset it. Connect it to the router when you’re done, then test it again. Service provider issues can make the lights fail.
If your Netgear password isn’t working, it’s likely because the password is mistyped, old (and since changed), or recently reset. Other common Netgear router password issues include new internet provider security measures, enabled Smart Connect, a faulty router, or a brief power outage.
If your Netgear router cannot find (or keeps changing) your IP address, possible causes include low WiFi signal quality, improper wireless security settings, outdated software, or physical/technical interference. Fortunately, most causes are easy to fix.
When living in a tech-savvy world, it only makes sense that we will encounter some problems. One of the most frustrating problems we can face …
If your Netgear router is not broadcasting wifi or won’t turn on, confirm your router is receiving internet from your ISP. If your phone tells you “connected, no internet,” your modem is not providing a connection. Plug a desktop or laptop into the router or model itself with a LAN (ethernet) cable.
It’s easy to overlook that routers get firmware updates. These updates are not brought to people’s attention, but are important and should be checked on …