Asus is one of the best-known names in technology. If you have an Asus monitor, what can you do to connect it to your computer? Sometimes, you may need to troubleshoot.
A common reason why an Asus monitor does not connect to a laptop, PC, or Mac is that the cable was not connected properly. In order for it to send a signal, it must be seated into the port on both the monitor and the computer securely. The cable may also be outdated.
On some types of cables, there may be pins that make the connection. If that is the case, those pins could have gotten bent or otherwise damaged. They may even be missing.
If one of the pins is not functioning properly, it may keep the connection from being made properly. In addition, missing pins mean that there will be a missing signal, so the cable needs to be replaced.
If you are using HDMI, it is important that you use the latest technology. HDMI 2.1 is one of the best options you have available for connecting an Asus monitor. It is even better than DisplayPort cables.
Even so, you need to be cautious that your HDMI cable has not become loose or has somehow disconnected from one of the ports. If that is the case, the signal will not be strong enough or may not exist.
In this article, we will consider some of the specific reasons why you may be having problems connecting your Asus monitor. We will also show you the setup for various devices.
Asus Monitor Not Connecting To Laptop/Mac/PC
Before we begin to look at some specifics, there are some things that can be done in almost every case to troubleshoot a problem. These issues will work, regardless of whether you are dealing with a laptop, Mac, or PC.
Input Mode – On your Asus monitor, there are likely a variety of inputs, some that are different and others that may be the same. You may need to select the proper input port by pressing the menu button on the Asus monitor and going through the options.
Cable Check – If you are having problems with one of the cables, you can troubleshoot it by using another cable of the same type. This will let you know if the cable was a problem or if it may be another issue, such as software, firmware, or perhaps even a damaged port.
Electrical – If you are having any electrical problems, then you are not going to get the connection between the computer and your new Asus monitor. Here are some things to check.
1. Receptacle – Although receptacles are well known for working, there are times when you may have an issue. Even half of the receptacle may be faulty. Try plugging in a lamp and if it works, the receptacle works.
2. Overload – We tend to have a lot of electronic items in the area where we are plugging in our new Asus monitor. In many cases, we may be using a multi-port plug that connects everything into a single receptacle.
This may seem convenient but it is actually problematic. We might be overloading the circuit. Try connecting your Asus monitor to a receptacle in another circuit, even if you have to use an extension cord.
3. Circuit Breaker – If you are having electrical problems and everything is off, it may be a tripped circuit breaker. Look in the panel box and check for a breaker that is out of line with the others. If you have a tripped circuit breaker, you can turn it off and turn it back on.
If you continue to trip circuit breakers, that means that the breaker itself is overloaded. They can only handle so much and often, we tend to put too much stress on them. Otherwise, it could be a problem with the circuit breaker itself.
Asus monitors are plug-and-play compatible. That makes them very easy to set up. If you have problems, consider the following specific scenarios:
Asus Monitor Not Connecting To Laptop
Are you having problems connecting your Asus monitor to a laptop? It may be a problem with the cable.
When your Asus monitor is not connecting to your laptop, unplug the cable and inspect it. If the cable is damaged or any of the pins are bent, replace it. Otherwise, you can try using a different cable of the same type or using one of the other connection options.
Believe it or not, another reason why you may be having problems is that the Asus monitor is not powered on properly. This could be due to a faulty power cord.
Always use the power cord that was included with the Asus monitor. If you must replace it, make sure you get one that is suitable for the task.
Asus Monitor Not Connecting To HP Laptop
We trust our HP laptops to get the job at hand done. What can you do when your HP is not connecting to your Asus monitor?
At times, you may need to set up the new Asus monitor by entering the presentation display mode (Win key + P). After entering this mode, you should select the setup that is appropriate for your computer and monitor.
If you are trying to connect multiple monitors to your HP laptop, you may need to reestablish the proper display drivers. Look at the display driver for your graphics card and check for any updates.
Asus Monitor Not Connecting To Dell Laptop
When an Asus monitor is not connecting to a Dell laptop, you may need to take the manual approach.
Your Dell laptop may require that you enable the manual detection of your new Asus monitor. Use the presentation display mode (Win key + P) or press FN + F8 to check the video display output.
If those options do not work, you may need to disable your graphics driver. The GPU can be disabled in BIOS, and that will force your computer to run the new monitor from software rather than hardware.
Once your new Asus monitor is recognized by your Dell laptop, you can reestablish dGPU in the system BIOS.
How To Connect Asus Monitor To Laptop
Your new Asus monitor is plug-and-play compatible. This means that setting things up with your laptop should be a no-brainer.
After assembling your new Asus monitor, run a cable from your laptop to the monitor. You can choose HDMI, DisplayPort, or Thunderbolt. Make sure that the cable is properly inserted into all ports. Plug in your monitor and turn it on, after which you can turn on your computer. It will recognize your Asus monitor automatically.
If you are having problems recognizing the monitor after following these steps, turn off the monitor, unplug it, remove the cable from the monitor to the laptop and start again.
Copyright protected content owner: ReadyToDIY.com and was initially posted on August 20, 2022.
Asus Monitor Not Connecting To MacBook/MacBook Pro/MacBook Air
Is your Asus monitor not properly connecting to your MacBook or MacBook Pro? There is something you can do to fix it.
To fix a problem with a MacBook not connecting to an Asus monitor, go into your system preferences and choose ‘Displays’. Hold down your option key to show the ‘Detect Displays’ function and select it. From there, you can choose the monitor and adjust the settings.
If you are still not seeing your Asus monitor in the settings, it is likely a hardware problem. The most common culprit is the cable.
Check the cable between your Macbook and Asus monitor for damage. Unplug it, turn off your MacBook, plug it back in, and then start your MacBook again. It should recognize the monitor automatically.
How To Connect Asus Monitor To MacBook/MacBook Pro/MacBook Air
Are you trying to connect an Asus monitor to a MacBook? It’s a very straightforward process.
As long as your MacBook supports connecting multiple monitors, you can simply plug in the new monitor using a USB-C or Thunderbolt cable. Make sure you are using Thunderbolt 3 or 4. After connecting the monitor, turn on the MacBook and it should recognize it automatically.
Sometimes, it may take multiple tries before it is able to set up the new Asus monitor properly. Try connecting the monitor while your MacBook is completely turned off and then turn on the MacBook to detect it automatically.
Asus Monitor Not Connecting To PC
Are you having problems with your PC not recognizing your Asus monitor? Here’s how to fix it.
Visually inspect the cable running from your Asus monitor to your PC. If there is any damage, such as cuts, brakes, or bent/missing pins, you should replace the cable with a new one. Ensure that the cables are properly and fully connected to the PC and Asus monitor.
If you’re still having problems, enter the presentation display mode by pressing the Windows key + P. This will allow you to choose the settings for your monitors.
How To Connect Asus Monitor To PC
Plug-and-play has made it possible to connect an Asus monitor to a PC easily. What can you do to make the process work for you?
After assembling your Asus monitor, plug an HDMI, DisplayPort, or Thunderbolt 3/4 cable from the monitor to your PC. Power on the monitor and after it starts up, turn on the PC. It should recognize the monitor and run through the setup process in the background.
There may be some steps necessary for manually updating your PC so it recognizes and uses the Asus monitor. This is typically only necessary if you are using multiple displays.
First, press the Windows logo key + P to enter the presentation display mode. Choose a mode that is appropriate for your computer setup.
You might also need to update the drivers for your graphics card. Typically, your PC will start this process automatically if necessary.
Copyright article owner is ReadyToDiy.com for this article. This post was first published on August 20, 2022.
Anytime you have difficulty connecting an Asus monitor with a computer, check the connecting cable first. It should be new, free from defects, and fully inserted into the port on both the monitor and the computer. Otherwise, you should check the power cable and ensure that you have power to the Asus monitor.
Related Articles
How to Reset/Adjust Asus Monitor
Asus Monitor Screen Issues (How to Troubleshoot)
ReadyToDIY is the owner of this article. This post was published on August 20, 2022.