Skip to Content

Bosch Refrigerator Alarm Not Working (How To Fix/Reset)

We rely on the alarm on our Bosch refrigerator to work when there are any types of problems. It alerts us to cold temperatures, hot temperatures, or air leaks in the refrigerator and freezer compartment. What can you do if it is not working?

The easiest way to reset a Bosch refrigerator alarm that is not working is to reset the refrigerator. Unplug the refrigerator for at least five minutes and plug it back in again. Once it is fully restarted, the alarm should be working again.

Depending on the model Bosch refrigerator you have, you may also have issues where the alarm can get turned off using the control panel. This can even happen by accident on occasion, so you have to check to see how it can be fixed in your specific model.

You may also have turned off the audible part of the alarm by pushing the alarm off button. This is a common way to silence the alarm when it is causing problems.

Even though the audible part of the alarm may have been off, you will still likely be seeing the error message on the control panel. It is good that you get a visual warning as well.

Restarting the refrigerator would usually fix this type of issue in almost every case. You can also try pressing the alarm off button for a few seconds to see if it starts working again.

Bosch Refrigerator Alarm Not Working (How To Fix/Reset)

There may be other reasons why we are having a problem with the refrigerator alarm. Some of these could be due to serious issues that we need to be aware of.

The alarm works when the door is not closed properly. It also works if the temperature in the refrigerator and freezer compartment is not within the acceptable range.

It’s important to pay attention to any alarm and error message you may receive on your refrigerator. After all, it is there to alert you when a problem occurs and the food may spoil.

At the same time, however, there may be certain sensors and other issues that can lead to the alarm not working properly. We will take a look at some of those now as well as the ways to address them individually.

Reasons Why Bosch Refrigerator Alarm Not Working

Temperature Sensor Not Working

The temperature sensor does what you would expect, it monitors the temperature in the refrigerator and freezer compartment of your Bosch refrigerator. It also signals the control panel to sound an alarm if the temperature isn’t where it is supposed to be.

If the temperature sensor in your Bosch refrigerator is faulty, it may not cause the alarm to sound when the temperature is off in the refrigerator or freezer. This can be an issue because it can cause food to spoil or the food in your refrigerator may be freezing.

Unfortunately, most people don’t realize that the alarm is not working in their Bosch refrigerator due to the temperature sensor until it is too late. If the temperature has been too warm in the freezer or refrigerator, you may have spoiled food that needs to be thrown away.

You can test the temperature sensor by removing it from the refrigerator and using a multimeter to see if it checks out with continuity. If the sensor is not working, it can be replaced.

Although the temperature is checked in your Bosch refrigerator automatically using that sensor, it is still a good idea to check it using a thermometer as well. Most people keep a small thermometer in the refrigerator to check the temperature on occasion.

If the temperature is not right in your refrigerator or freezer, it may not be the sensor but it could be the way you are loading the unit. Freezers are not made to be packed completely full because it cuts down on air circulation. In addition, if you add a lot of fresh food to the freezer, it will take a while before the temperature gets down to where it should be.

Copyright protected content owner: ReadyToDIY.com and was initially posted on 2022-11-26.

The Door Switch Is Not Operating Properly

When we close the door to our Bosch refrigerator, we like to walk away and not think about things until it is time to open the door again. Unfortunately, there may be times when the alarm is not working and you don’t realize the door is not closed properly.

The door switch in your Bosch refrigerator can be faulty and if it is, the alarm may not be working as expected. It could cause the alarm to sound repeatedly or the switch may not be signaling the control panel to sound the alarm.

Anytime the door in your Bosch refrigerator is not sealed properly, it would cause an alarm to sound. This is the proper method of operation because it keeps the temperature from getting too warm in the refrigerator or freezer.

You can test the door switch by working it manually. Open the door and find the switch, after which you can manually hold the switch to close it and see if the alarm goes off or not. In most cases, a Bosch refrigerator alarm works within about 60 seconds.

The door switch is relatively easy to change out. If you think it may be a problem, it could be worth changing it to see if it fixes the issue.

Bosch Refrigerator Alarm Not Working Due To Main Control Panel

The main control panel is the brain of your Bosch refrigerator. If it is not working, the alarm may not be working.

If the main control panel is faulty in your Bosch refrigerator, it could cause problems with the alarm. You can remove the control panel and visually inspect it for any damage, such as burnt circuitry or cracks. The ribbon should also be checked for damage. Replace the control panel if necessary.

If the main control panel is going bad, it will likely cause a variety of different problems. This could include but is not limited to some of the buttons and various features not working. The alarm is included in that number.

Copyright article owner is ReadyToDiy.com for this article. This post was first published on 2022-11-26.

Although the control panel is not the first place to check, it certainly can cause problems. If you change out the control panel and the issue persists, you should contact a technician.

Bosch Refrigerator Alarm Light Stays On

Your Bosch refrigerator has various alarms to alert you to problems. This includes an alarm light. What can you do if the light stays on?

A common reason why a Bosch refrigerator alarm light stays on is due to something being stuck in the door gasket. The refrigerator will recognize when air is leaking from the unit, and the alarm light will stay on to alert you to that fact.

In most cases, the alarm light works along with an audible alarm to alert you to serious problems. You may have disconnected the alarm, but you can’t disconnect the alarm light.

If the alarm light is on and you feel that it is not on for good reason, you can reset the refrigerator to fix it. This is done by unplugging the refrigerator for five minutes and plugging it back in again.

Bosch Refrigerator Alarm Blinking

If the alarm in your Bosch refrigerator is blinking, what can be done to fix it?

The most common reason for a Bosch refrigerator alarm to blink is if the freezer is not cooling properly. The temperature sensor indicates that there is a warm temperature in the compartment and causes the alarm to sound.

In most cases, you will hear an audible sound along with seeing the alarm blinking. This is a serious problem that needs to be corrected quickly or you will lose the food in your freezer.

If the alarm is blinking but the sound is not heard, this is also something that needs to be addressed because you should hear the alarm to alert you to this serious problem.

How To Turn On a Bosch Refrigerator Door Alarm

Is your refrigerator door alarm off on your Bosch refrigerator? Here’s how to turn it on.

The easiest way to turn on your Bosch refrigerator door alarm is to reset the refrigerator. Unplug the refrigerator or turn off the circuit breaker for five minutes before reestablishing the power. Your door alarm should be working again.

You may also have a problem with the refrigerator door alarm not working in your Bosch refrigerator if it is still in display mode. If that is the case, press and hold the Start/Reset button. The alarm should be reset within a few seconds.

How To Reset Bosch Refrigerator Door Alarm

If you need to reset your Bosch refrigerator door alarm, what is the easiest way to do it?

Resetting your Bosch refrigerator door alarm is possible when you reset the refrigerator. Unplug the refrigerator or turn off the circuit breaker for five minutes before turning it back on again. The alarm should be back to its normal setting once the refrigerator fully restarts.

If you disabled the audible alarm and need to turn it back on again, you can press the alarm off button and hold it for a few seconds. That will sometimes reestablish the alarm again.

If your Bosch refrigerator alarm is not working you should reset the refrigerator. Resetting the refrigerator is done by turning off the power by unplugging it or turning off the circuit breaker. After five minutes, reestablish the power and the refrigerator alarm will be reset.

Related Articles

Bosch Refrigerator Not Turning On

Bosch Refrigerator Freezer Not Freezing

Bosch Refrigerator Ice Maker Troubleshooting

Bosch Refrigerator Water Dispenser Troubleshooting

ReadyToDIY is the owner of this article. This post was published on 2022-11-26.

How To Use Bosch Refrigerator Ice Maker