Generally speaking, KitchenAid dishwasher cleaning and washing problems can be corrected by cleaning debris from the dishwasher and doing a hard restart. After shutting down the dishwasher power for a few minutes and restarting, you can continue to diagnose the problem and fix it within a few minutes.
Discovering your KitchenAid dishwasher’s lights flashing can be a cause for concern, signaling a hiccup in your appliance’s operation. These flashing lights serve as error …
A Kenmore dryer will not start if there is a fault in the thermal fuse, motor, drive belt, control board, door switch or the start switch. If the dryer keeps turning off or tripping the fuse, you should check the heating element, motor, power cord, thermostats and timer, and clean out any lint.
If your Whirlpool oven will not turn on, first and foremost, check to make sure that you have the oven plugged in. Once you have confirmed that the device is plugged into a power outlet, check your breaker and be sure that power is running to the area to ensure proper function.
It’s caused by a faulty door latch. The door latch can be replaced yourself by ordering a new one, or having a repair technician repair it for you. There can also be a build up of debris on the door latch that can be removed by cleaning it with a soft brush, once you remove it.
I love using my KitchenAid freezer both for the automatic ice maker and the water dispenser. But, there was one time I noticed that the …
As a general rule, it’s caused by insufficient water pressure, the water filter being restricted, or the water inlet valve being defective. The water filter is the easiest to inspect and repair or replace so it should be inspected first, followed by the water pressure and the water inlet valve.
Some of the most convenient items we have in our home can also be some of the most annoying. This includes a KitchenAid dishwasher when …
When a KitchenAid dishwasher doesn’t dry properly it is typically an issue with the machine not cycling as it should. Some other common issues include the vents not opening, the heating element not working, or the Rinse Aid dispenser not being used properly.
The temperature can be turned down using the controls. Other than that, the vents may be blocked which stops the evaporator fan from pushing cold air into the fridge. The condenser coils can also be covered in dust or pet hair and cause them not to function correctly.
A Kenmore fridge will not work if heat from the fridge cannot be removed or if cold air cannot circulate freely through the compartments. Ice buildup, overfilling or dirty condenser coils can all be reversed, whereas a broken evaporator fan, condenser fan or compressor will need to be replaced.
Generally, the first thing you should do is check that it is turned on. Also, new fridge installs can take 24 hours for the ice maker to start working. After that, the water valve or the water filter can be the issue, and you need to ensure both aren’t damaged.
As a general rule, start by closing your fridge completely and waiting for 1 minute. After that, open the fridge again and see if the lights are working now. If that didn’t get the lights working again, then there can be an issue with the light switch, or the light bulbs can be loose or blown.
Generally speaking, if your ice maker is not producing ice, it is likely due to one of just a few problems. Most people will be able to fix the problem within a matter of minutes by thawing the unit and starting from scratch. There may also be some issues that are better left to the professionals.
Most people choose a quality refrigerator because they want something in their home that is going to be convenient with very few problems. Most refrigerators …
The display will show ‘HIGH TEMP’, ‘PF’, or ‘Power Failure’. If it displays power failure or PF, then clear it by pressing ‘alarm reset’ and it will start cooling again. ‘High temp’ occurs if the temperature in your fridge is too warm, it will only stop once it gets to a lower temperature.
Upgrading the home is a great way to improve its value and make it more livable. Some jobs are going to be easy to do …
An LG fridge most commonly will not work because of issues with airflow between the fridge and freezer compartments. This can be caused by the vents becoming blocked by ice or stored food, or by a broken evaporator fan. Other causes include the wrong settings on the fridge or broken components.
Generally speaking, vinyl tile can be installed over a hardwood subfloor. There are even some reasons why a hardwood subfloor is one of the best choices for vinyl tile. As long as the subfloor is in good shape, it can stay in place with the vinyl tile being installed over it.
Generally, it’s a good idea to lay ceramic tiles over ceramic tiles. The main concern with laying ceramic tiles is the subfloor is stable, level, and flat. Ceramic tiles need to be inspected before laying ceramic tiles on top to ensure they are level, and installed correctly.
The most important thing is to ensure the old linoleum is flat and level. This involved measuring it using a carpenter’s level. As well as, filling in any imperfections using a levelling compound. After that the linoleum should be cut, layed out, trimmed, and attached to the old linoleum.
If your fingers or the control pad are wet the touchscreen won’t work. So, you should ensure that your fingers and the control pad are completely dry. Also, you need to ensure that you press down the button for long enough. You need to press and hold the start button for 2 to 5 seconds.
First, check the temperature setting for your refrigerator is set to 33–40°F (0–4°C). The controls to change the temperature are located on the outside on the digital display or can be on the door hinge. It may also be on a low setting, so turn it up to a higher setting.
Generally, this is related to the wiring that connects to your LED light, or the wiring in the bulb. The component that holds the LED light including the wiring is replaced when the light is broken. But, it’s also possible the plug that the LED light connects with is loose.
Yes, you can reset a Whirlpool dishwasher by pressing the reset or start key on the device and waiting for a few minutes. If the Whirlpool dishwasher does not start after that, then reboot the whole system by turning off the power supply at the house fuse box or house circuit breaker.
To fill in any damaged areas, fill the spots with a premixed floor leveler and allow it to dry. Once this has dried, you will then need to thoroughly clean the floor of any dust and debris. Once clean, you can then snap chalk lines across the floor to guide the pattern of your new flooring.
Generally, it’s because the freezer is not set to the correct temperature. LG recommends that the freezer temperature be set to -4°F (20°C). The digital display on the front of your fridge can be used to set the temperature. Simply press the freezer temperature button.
The water supply line can be replaced with a new one fairly easily. But, the water supply line might have been set too high and may have caused the line to burst or crack. Other times the line could have bent back on itself and weakened it in such a way that it breaks.
Generally, fixing it yourself is very difficult and it’s best to hire a technician to repair an LG ice maker flap that isn’t opening. To repair it the front needs to be removed to expose what’s called a solenoid, but it requires experience with electrical wiring.
It’s either the water supply line or the water filter. If the water supply line is leaking, or the water is turned off then your ice maker won’t fill with water. Also, if the water filter is blocked, water won’t be able to get through and into the ice maker.
If the old carpet in the area is a high-pile carpet, consider laying a thin underlayment of plywood over top of the carpet so that the tack strips can easily grip to the surface, you can have a decent subfloor for the carpet, and you can ensure that there won’t be movement once complete.
If installing self-adhering vinyl tiles, you will need a hammer, utility knife, carpenter’s square, tape measure, tile cutter, and a chalk line. Have these tools gathered together and placed in an area that is easy to reach to ensure the most hassle-free and smooth installation process.
To replace damaged vinyl plank flooring, using either spare vinyl flooring from installation or new material that has been acclimated to the room, find the row where the damaged plank lies and remove the baseboard from this area. You’ll then pull the floor gently up until reaching the damaged plank.
A Kenmore dishwasher will trip your breaker when there is excessive current detected in the dishwasher’s circuits, usually caused by damaged wires or parts. The thermal fuse will blow in response to excess temperatures. This can also be due to excess current or a heating element that won’t turn off.
To lay vinyl plank around a bathtub, you will need to follow all of the preparation steps that were previously mentioned in “Can You Lay Vinyl Plank Under/Around Vanity?” and finish by caulking the area around the tub that meets with the vinyl, allowing enough space for expansion before caulking.