Skip to Content

KitchenAid Refrigerator Door Not Closing/Sealing

A KitchenAid refrigerator uses a premium temperature management system to retain the taste and texture of fresh and frozen foods. It has a sensor control system that detects when temperatures rise above average and activates the fan to lower temperatures to the average level. However, the door will not close/seal when your refrigerator has problems.

The following section identifies the various KitchenAid refrigerator door problems and recommends the best solutions.

KitchenAid refrigerator doors not closing/sealing can be due to physical obstruction, worn out or dirty gasket, fridge not level, loose door hinges, or faulty door. Clean the gasket and tighten the hinges. Rearrange the fridge, level it, and replace the damaged gasket or door to fix the issue.

The rest of the article details the various reasons why a KitchenAid refrigerator door fails to close or seal properly and how to resolve the issue.

Reasons Why KitchenAid Refrigerator Main Door Not Closing

A KitchenAid refrigerator has plenty of new storage features, including an under-shelf prep zone to maximize space and a sliding storage tray for easy organization. However, these features may be pointless if the main door won’t close.

The section below identifies why a KitchenAid refrigerator door may fail to close and recommends various ways to resolve the issue.

The various reasons for a KitchenAid refrigerator’s main door not closing include a dirty/damaged gasket, physical barrier, loose hinges, shelves being out of place, fridge tilted forward, or seal sticking out. Rearrange the fridge, tighten the hinges and adjust the tilt.

You should also replace the damaged gasket or door.

1. A Dirty/Damaged Gasket

A KitchenAid refrigerator has a rubber gasket that hangs around the door to regulate airflow. Sometimes lint accumulates on the gasket, causing the door not to close. In this case, use a mixture of warm water and dish soap, and vinegar to clean the gasket and reattach it correctly. Sometimes the gasket may wear, causing the door not to close. Replacing it will resolve the issue.

2. Physical Barrier

Sometimes, arranging food packages on the fridge door may cause obstruction resulting in a door that won’t close. Additionally, the detachable fridge shelves and bins may get out of position after cleaning or moving the fridge and cause obstruction. In this case, reattaching the shelves and re-arranging the fridge will resolve the issue. If you recently bought your refrigerator, you could have forgotten to remove all the packaging material, which could cause obstruction. Check and remove them to resolve the issue.

3. Loose/Damaged Hinges

The refrigerator door hinges may get loose due to weight or regular use, causing malalignment and resulting in a door that won’t close properly. The hinges may also rust, bend, or get damaged, causing the door to not close. Tighten the loose hinges or replace the damaged ones to resolve the issue.

4. Refrigerator Tilting Forward

Your KitchenAid refrigerator will tilt forward when you place heavy items on the door resulting in malalignment and a failure to close. Uneven fridge feet can also cause it to lean forward, resulting in door malalignment. Likewise, placing the refrigerator over a rug or uneven ground can cause tilting and door malalignment. Hence, remove the carpet and use a bubble or laser level to ensure the feet are of the same height to support your refrigerator evenly.

Reasons Why KitchenAid Refrigerator Main Door Not Sealing Properly

A KitchenAid refrigerator door not sealing correctly can cause food spoilage and power wastage, overwork the compressor, and shorten the lifespan of your refrigerator. The following section discusses why this happens and the best ways to resolve the issue.

A KitchenAid refrigerator’s main door not sealing correctly can be due to a worn-out seal, items blocking the door, a misaligned door, a seal that is folded outwards, or a dirty door pocket. Clean and rearrange the fridge, and replace the damaged components to resolve the issue.

1. A Worn Out/Dirty Seal

The KitchenAid refrigerator door seal may get dirty due to food particles or spillages, causing obstruction and resulting in a door that won’t seal. Dip a soft cloth in a mixture of warm water and dish soap and wipe it clean. The rubber gasket may get too dry and brittle, causing it not to seal. Hence, replacing it will resolve the issue.

2. Items Blocking The Door

The refrigerator door will not seal if you have arranged large items on the door. Likewise, there may be something stuck between the hinges that could be causing an obstruction. Utilize the space inside the fridge and avoid placing large items near the door. Check between hinges and remove any obstacles to resolve the issue.

3. Door Malalignment

Fridge door misalignment can cause it not to seal correctly, allow hot air and spoil the food. It occurs when you overload the door, causing it to tilt forward. Misalignment can also happen due to loose or damaged hinges.

The door hinges may become loose or bend when you constantly overload the door or due to impact. Tighten the hinges and test the door seal. Replace the damaged hinges if tightening them does not resolve the issue.

Placing the fridge on uneven ground can cause door misalignment and subsequent failure to seal. Use shims to level the fridge wheels. Remove the rug or anything that may cause the refrigerator to tilt, and test if the door seals properly.

4. A Hinged Seal Folding Outwards

A KitchenAid French door model has a vertical hinged seal that folds inwards when you open the left door and seals the refrigerator when you close both doors. Sometimes the seal may fold outwards when you open the door, causing obstruction when you close the doors. In this case, fold the seal inwards before closing the door.

5. Dirty Door Pocket

The door pocket is the space the gasket fits to create a tight seal. Dirt can accumulate on the pocket and cause obstruction, failing to seal appropriately. Use warm soapy water to loosen the dirt and clear the block.

Reasons Why KitchenAid Fridge Door Won’t Stay Closed

A KitchenAid refrigerator door that won’t stay closed can strain your pocket in increased electricity and repair costs. It will allow hot air inside and cause overheating and eventual breaking of the motor. Various reasons can cause a KitchenAid refrigerator that won’t stay closed. Read the section below to discover why your machine is acting up and learn how to fix the issues.

A KitchenAid refrigerator won’t stay closed due to overloaded door shelves, misaligned hinges, uneven ground, old sealant, and a packed fridge. Remove heavy items from the door and align the hinges. Replace the old sealant and level the refrigerator to resolve the issue.

1. Overloaded Door Shelves

Heavy items on the refrigerator door shelves may cause overloading resulting in a door that won’t stay closed. In this case, remove these items and place them in the inner fridge compartments.

2. Misaligned Hinges

The refrigerator door hinges may be misaligned due to obstruction or normal wear and tear after a heavy impact. As a result, the door may become loose, so it won’t stay closed. In this case, remove any barriers and oil the hinges. Replace them if they are bent, damaged, or won’t stay in place after tightening them.

3. Uneven Ground

A KitchenAid refrigerator door won’t stay closed when you place the refrigerator on uneven ground. It may keep tilting back and forth, causing the rubber gasket to detach. Use shims to ensure the fridge is level for the door to stay closed.

4. Old Sealant

A refrigerator door seal may lose its grip when it gets older due to crispness, wear, tear, or accumulation of grime. Hence, it won’t keep the door closed. Check the rubber seal for any damages and replace it to resolve the issue.

Copyright protected content owner: and was initially posted on November 24, 2022.

5. Overloaded Refrigerator

Your KitchenAid refrigerator door will not stay closed if you overload the refrigerator. Bulky items like milk gallons can keep popping the refrigerator door open and allowing hot air in. Therefore, remove these items and avoid overloading the fridge to resolve the issue.

A KitchenAid refrigerator door not closing/sealing may be due to physical blockage, a worn-out or unclean gasket, an unlevel refrigerator, or loose door hinges. Tighten the hinges and clean the gasket. To solve the problem, reposition the refrigerator, level it, and replace the damaged door gasket.

Related Articles

KitchenAid Refrigerator Not Turning On (How to Fix)

KitchenAid Refrigerator Water Dispenser Troubleshooting

KitchenAid Refrigerator Alarm Going Off Won’t Stop Beeping

KitchenAid Refrigerator Ice Maker Troubleshooting (Not Working/Need A Fix)

How To Use KitchenAid Refrigerator Ice Maker

KitchenAid Refrigerator Lights Not Working

KitchenAid Refrigerator Ice Dispenser Not Working

KitchenAid Fridge Not Working/Cooling

Copyright article owner is for this article. This post was first published on November 24, 2022.

KitchenAid Water Dispenser Not Working

KitchenAid Freezer Not Working

How to Reset KitchenAid Refrigerator

KitchenAid Fridge Freezer Door Not Closing / Sealing

KitchenAid Refrigerator Odor Problems (How to Fix)

ReadyToDIY is the owner of this article. This post was published on November 24, 2022.

KitchenAid Refrigerator Makes Loud Noise