We do not recommend installing countertops on uneven walls as they will cause large bumps and dents in your counters, sink, and tub. An alternative to countertops are stainless steel strips or laminate kitchen carpentry, which are easier to install and come in various sizes.
You can put patio stones on uneven ground, but many experts agree that a level ground is much more suited for the job. However, it could be challenging to have a completely level site before installing a patio due to the surrounding conditions, such as boulders, tree stumps, etc.
To put vinyl siding over asphalt, identify the starting point and install the starter strips. Set up the corner posts, put the J channel along the doors and windows, and apply the flashing to prevent moisture. Install the siding panels to complete the process.
Plaster is porous and easily allows moisture in. Look for the primary source of dampness in your property. It could be faulty plumbing, leaking gutters, downpipes, small gutters, or poor insulation. Stop the sources, and apply your new plaster well. The new plaster coat should not leave any cracks.
You can put plaster over cracks on ceilings or walls, provided you have the right tools. For the best results, consult an expert. Inspect the crack, gather the wanted tools and gently apply the plaster to the crack. Clean up and remember to monitor the area for any other structural damage.
Check your drain pump to ensure there is no debris if you hear a grinding noise. It is likely that something is caught in your drain pump. If the drain pump is clear of debris but is still making a grinding noise, you will need to have the drain pump replaced.
Suppose you hear a pump sound in your dishwasher while in the middle of a wash cycle. It could mean the pump is not pushing water to the spray arms. If your pump is not working correctly, it could mean that the bearings have worn out. You will need to have the circulation pump replaced.
Clean and degrease the paneling and then give the wood a rough sand. Apply a coat or two of primer and wait for it to dry before applying your tiles. Fill in any imperfections or holes and sand them. Use a level to ensure that your tiles are straight and then mark the tiles that need to be cut.
After cleaning the wallpaper surface with soap and water or a degreaser, wait for it to dry before applying your first tile. Start on one side of the wall, approximately in the middle, and work your way up and down from there. Use a level to mark a line so that you apply the tiles correctly.
Dishwashers have changed how we clean our kitchens, and the change has been for the better. Many people don’t have the time to manually wash …
Having a dishwasher can be great—you don’t have to get your hands wet just to clean the day’s dirty dishes and there are no family …
To connect your Vizio soundbar to Hisense TV, you will need to connect a HDMI cable to the correct port on the Vizio soundbar. Look for the port labeled HDMI OUT (ARC) and insert the end of the HDMI cable into it. Connect the other end of the cable to the HDMI 1 port on the TV.
Overall, plaster can be applied over caulk. But, ideally caulk should be used after a wall or surface has been plastered. To allow better adhesion rough up the caulk using a coarse grit sandpaper. After that plaster can be applied using the regular method of plastering a surface.
Overall, the float has grime and can’t function correctly, or there is a food particle stuck underneath it, the drain hose has moved out of position, and your KitchenAid dishwasher fills and drains at the same time, or the water supply lines are leaking or kinked.
In general, there is an issue with water entering your KitchenAid dishwasher, it can be caused by either the drain hose being improperly installed, the door not being closed completely, a kink or leak in the water inlet hose, or the float is stuck out of position.
As a general rule, first check the ice dispenser is turned on. Otherwise, some rare issue has occurred that requires troubleshooting. There can be an ice jam in the ejector arm, the water filter has a blockage, or the water supply line is leaking or has a kink. Inspect each, one by one.
As a general rule, test the wall outlet is supplying power by testing it with another appliance or a device. It’s common for the switchboard in your home to be the issue if the wall outlet is not supplying power. If it still won’t turn on, then do the following steps.
Generally, check it’s not in demo mode, or Sabbath mode. After that, ensure that it’s turned on, none of the vents are blocked with food or drink items, and the temperature is set below 40.0°C (4.4°C). If it’s still not cooling, inspect the condenser coils for a build up of dust.
You can put a stone veneer on a concrete/cement surface, provided you have the required tools. Working with a professional for the best results is advisable, especially if the project is huge. Measure the concrete surface well, use the right veneer stones and install veneer stones carefully to avoid future cracks.
How to fix an LG refrigerator that isn’t turning on depends on what is causing the problem. Since the most common culprit is a power issue, the fix may be merely replacing the old power supply cable with a new one. Or it could require rewiring the wall outlet if the problem is the electrical outlet.
Preparation of the ceiling for peel and stick tiles mainly involves cleaning. You have to ensure that the ceiling is dry and free of grease. If the ceiling is wet, the tiles won’t stick. You must also ensure that the surface is smooth and level before you start.
Peel-and-stick tiles can cover bathroom walls and give them an inexpensive facelift. Clean the area and fix any wall fractures. Install tiles on the wall, starting from the center, and repeat until you cover the wall. Cut to fit and complete the operation.
Carpeting is probably one of the most popular floors, but for some people, a change is in order. Is it possible to put peel-and-stick tile …
Generally speaking, there isn’t a problem with applying plywood directly over OBS. It can be attached in place with nails or screws. There are a few potential problems since you are dealing with two different types of wood but for the most part, this double layer of wood will not be a problem.
Plywood is one of the most commonly used building materials. It makes a great subfloor and can also be used on walls and even the …
It is not generally recommended to put plywood over an old hardwood floor but it can be done. If you install the plywood properly and attach it solidly, it can provide a suitable subfloor for almost any other type of floor, with the exception of tile.
There are many different choices when it comes to flooring. Some of those choices are going to make your home more luxurious and others can …
There are differences between vinyl plank and vinyl sheet beyond the look. Vinyl plank tends to be more luxurious and can mimic the look of wood or stone. Vinyl sheet is a good choice for those on a budget and if you just need to put a quick floor down to cover the subfloor.
You’ll need a hawk and a finishing trowel to apply plaster to the wall. But before you do that, apply waterproofing paint to the MDF board with a paint roller. Cut the metal lath with a hacksaw or tinsnips, and then nail it to the board using a hammer. Alternatively, use screws and a screwdriver.
When plastering cement boards, use an appropriate primer to help the plaster to adhere to the boards. Cover the floor with a drop sheet and when the primer is dry, apply two to three layers of plaster to the wall. Smooth it with a damp sponge or wait for it to dry and then sand any rough spots.
There are several reasons as to why the dishwasher is stuck on wash/clean cycle. These most common ones being the water heating cycle is not working properly, the thermostat is malfunctioning, the float switch stopped working, or the timer isn’t operating correctly.
When installing peel and stick tiles on a countertop, you will need to prepare the surface, lightly sand the countertop, arrange and then apply the tiles to the countertop, press the tiles down firmly in place using a heavy rolling pin, and then cover the edges of the countertop.
We recommend you proceed to install sheet vinyl flooring in the basement, especially if it is one that sees considerably high traffic volume. This means if the basement is used as a laundry room or playroom then installing sheet vinyl flooring would be an ideal choice.
You can employ the miter saw to cut exhaust pipes. The miter saw will cut the exhaust tubing with an abrasive metal cutting blade. However, before you proceed, ensure you have clearance on the table for the pipe. Doing this guarantees easy clean cuts without any jarred edges.
With the miter saw, you can cut through ABS pipes of all sizes. To do this, start by attaching a fine-toothed carbide-tipped blade, securely clamp the pipe to hold it in place, wear safety gear and watch out for chips flying off the tubing while cutting.