To avoid your clothes smelling, it is recommended by Samsung that you put the washer on a self-clean cycle every 20 – 40 washes. That means the average household should clean their washer at least once a month. But it can be more often If the washer is used more often than once every 2 or 3 days.

The most common reason for a Samsung washer to not drain properly is a blocked drain pipe. After that, the drain filter or drain pump could be the cause of water standing in the machine. Occasionally, the drain hose will not be at the correct height, preventing the water from draining properly.

If a Samsung washer fuse is blown, you’ll need to remove the access panel on the back of the machine. The main logic board is located right at the bottom of the machine and is held in place by two screws and two plastic clips. The fuse is located on the logic board.

The Samsung vacuum is a very dependable small household appliance and should continue giving you excellent results for a number of years. There may be times when you experience issues with the vacuum but these are usually quick and easy to resolve. You can successfully complete these fixes yourself and save yourself time and money.

The Samsung Smart Tag may emit 3 beeps, which indicate you have the separation alert set up and the tracker has temporarily lost connection with your phone due to spotty Bluetooth. Eliminate this issue by using the wifi silent zone setting on the tracker.

In order to reset a Lenovo monitor, unplug the power and wait 10 seconds before plugging it back in and powering it on. A factory reset may be necessary, to do so hold down the volume +/- while the monitor is on for 8 seconds and proceed with the directions on the screen that it displays.

At times you may find you need to reset your Gigabyte Monitor and this is very easy and quick to do. First, click the menu button underneath the front of the monitor. Scroll down and select Reset All. The screen will go black for a few seconds, start back up, and be reset and ready to go.

The easiest way to apply epoxy over particle board is to buy a suitable kit. There are kits available for this purpose in many areas of the home, including countertops. A kit will provide you with everything you need to prepare the epoxy and apply it properly.

The first step in applying epoxy over drywall is to mix the epoxy. This should be done according to the manufacturer’s instructions. When you mix the epoxy, you will have to work with it quickly so that it doesn’t dry before you have an opportunity to apply it to the drywall.

Overall, the agitator is loose and needs to be tightened or replaced, it’s overloaded with too many heavy items, or too much laundry, the washer is not level because one of the feet are too long or too short, or the stabilizers on the side of the tub have failed and need to be replaced.

Overall, start by checking that it has charge but putting on your charging bay, to see that it has some battery. After that, do a soft reset by holding down both buttons on the right hand side and selecting ‘restart’ on the touchscreen. Then do the following steps.

Overall, the drain pump has a clog in it, the drain pump has failed, the onboard computer needs to be restarted by unplugging your GE washer and the wall and plugging it back in again, or the drain hose is kinked or is not installed into the stand pipe correctly.

There are many benefits to using epoxy over OSB. For one, it is a less expensive option than using a higher quality wood but it will work just as well for most applications. As long as you use OSB that is of high quality and free from any major defects, you can be happy with the project.

You can install granite tile over concrete if you prepare the concrete in advance. Make sure that it is level and free of any major issues, such as cracks or holes. After the subfloor is prepared, you can install the granite tile and it will last for a lifetime.

If you want to install rubber flooring over concrete, you can do it after preparing the concrete properly. The subfloor should be clean, level, and free of defects. You can then begin the installation process and you will have a rubber floor down in no time.

The main reason why people install stone over concrete is because of the natural beauty it provides. Since you are putting something from nature in your living area, it really helps to dress things up and to make it beautiful from a natural standpoint.

You can bypass the Amana washer lid lock in just a few steps, but it’s important that you plan it well and do it properly. If you fail the bypass, your machine won’t turn on, and it might not work properly again. Take bypassing the washer lid lock seriously.

Deck tiles make a beautiful addition to many outdoor areas. They can even be used indoors, but can you install them over concrete? You can …

The most common reason why you have a blurry screen on your Samsung TV is that the HDMI cables need to be replaced. Choose new cables with the latest HDMI technology and ensure they are plugged fully into the port on the TV and the connected device. Otherwise, you can perform a soft reset by pressing and holding the power button on the remote control until the TV turns off and restarts.

If you are considering doing some upgrades to your home, installing porcelain tile may be on your agenda. Is this something you can do if …

If you want to install ceramic tile over concrete, you need to prepare the concrete in advance. It has to be dry, clean, and free of damage. In some cases, you may also need to use an uncoupling membrane to keep the cracking concrete from cracking the ceramic tile.

Overall, check that your Samsung Bluetooth speaker is plugged in properly to the wall outlet by inspecting both ends of the power cable. Also, check the wall outlet is supplying power by plugging a different device into it. Below is what to do if it won’t power on, and how to fix pairing issues.

Overall, first check that there is no error code showing on the LCD display. If there is, then see what the error code means on the official Samsung website. If not, pick it up and place it on the docking station manually to see if it has a charge and will charge. Then do the following.

To fix the oily smell, run an empty hot water cycle with white vinegar to remove any oil/ grease accumulation on the washer tub and the drains. Also, dip a towel in a vinegar and baking soda solution and then use it to wipe any layers of oil on the door seal.

To fix GE washer smells, use the hot cycle regularly. Also, leave the door open after use, to allow the inside to dry out. Make sure that the door seal is cleaned regularly with bleach or white vinegar. Check the drain pump and filter and remove any obstructions that prevent the water from draining.

Your GE washer lid lock is not working due to mechanical or electrical failure. Examine the door lock for any damaGE and replace it if it’s damaged. Test the door switches and replace any that lack continuity. Further, examine the door strike and main control board and replace any damaged parts.

The most common cause of a back leak in an Electrolux washer is a damaged drain or water inlet hose. If you observe the washer leaking when it is in the spin cycle, it is another indication that a hose may be the cause of the leak. To fix the problem, check the inlet hose connection at the tap.

You can bypass the lid lock on a Maytag washing machine by splicing a switch into the locking mechanism wiring. To do this, you need to remove the lock mechanism and disconnect the wiring. Remove the three wires from the lock and connect them to an AC switch.

Anytime you are experiencing the Samsung TV black screen of death, you should first try a soft reset of the TV. 1) Unplug the TV or turn off the circuit breaker for 60 seconds. 2) Press the power button and hold for 30 seconds. 3) Reestablish power to the TV.

If your KitchenAid microwave is not working, you may need to do a reset. Unplug the microwave from the power source or turn off the circuit breaker. Wait one or two minutes for the residual energy to dissipate and then reestablish power again. It should fix most small problems.

When an issue with your Samsung tablet camera occurs, you can clear the data from the apps manager. Enter the application manager in settings and find the camera up under all apps. Choose the clear data option to reset the camera. Otherwise, you may have to replace the device camera with a new camera from the app store.

An essential factor for installing tile on concrete is finding the center of the room. The tile should be installed from the center to the walls in both directions. Mark the center point clearly with a chalk line and make sure of your measurements in both directions.

Concrete is an excellent choice as a subfloor for installing hardwood flooring. There’s no reason for you to do any additional work, outside of repairing any damage to the concrete and ensuring that there are no high or low points that would affect the installation.

You can install laminate flooring successfully over concrete. In fact, concrete is an excellent subfloor. As long as the concrete is sound and free of major defects, you can put down a vapor barrier and some underlayment before installing the laminate. You will have a floor that is both beautiful and solid.

As a general rule, first check that the cable from the monitor to your computer is plugged in correctly. Verify that the monitor is working properly by disconnecting the video cable. If it’s working properly the monitor should say ‘no video signal’. If it doesn’t do the steps below.