If your HP laptop’s WiFi keeps disconnecting, it could be a software error or a faulty WLAN card. Try updating your laptop or replacing the WLAN card to re-establish a connection. If neither of these options works, you may have corroded wires or a weak WiFi signal.
When your Dell monitor keeps turning off, the video card driver is malfunctioning and needs a refresh or reset. When your monitor isn’t working, the issue is a failure in the power cables, display cables, or video card. If your monitor blinks, your computer is switching display modes automatically.
To enable AirPlay on your Samsung TV, you will go into the settings of your TV first. To do this, navigate to ‘Settings’ > ‘General’ > ‘AirPlay Settings’ > ‘AirPlay’ > and then turn the AirPlay feature ‘On’ if it has not yet been switched on. Once you have done this, your TV will be in a constant mode to be able to mirror whatever you please without having to enable the feature again.
As a whole OSB is not the best option to use as an underlayment for engineered hardwood, and the main reason is that it puffs up when it comes into contact with water, and doesn’t shrink back again. Plywood will shrink back to its original shape after it expands.
The first thing you should check is to see that the batteries powering the remote are fully charged. The next thing you will need to check is that the IR (infrared) sensor is working correctly, and you can do this by utilizing (pressing) any other button on the remote. If these options do not solve the problem, you will need to hard reset (factory rest) your tv and finally, if that does not fix the problem, you may need to replace the remote due to it being faulty.
As a general rule, the Roku remote finder button won’t make your Roku remote beep if the remote is out of WiFi range, or is out of battery. Your Roku device also needs to be connected to the internet for the remote finder to work. If these are all fine and it doesn’t work, reset your Roku device.
To start with you should check that your internet connection is working correctly. To do that use another device like your smartphone or a laptop to verify the internet is working. After that you should delete your internet connection from your Roku and re-add it.
Android version 9 has lost the ability to utilize this feature, and currently, there is no workaround, so some Sony TVs have lost this capability. What you will need to do if you would like this feature before Sony releases a fix is to roll back your Android version on your TV to a version that supports this feature.
Some devices will send a signal in error, causing your TV to keep switching. The ability to turn the automatic HDMI switching has been coded in recent Samsung firmware, and you are able to activate it with your remote. Point your remote at your Samsung TV and input the code, which is: mute – 7 – 2 – 9 – exit. This should solve your problem.
A Kenmore washer that won’t spin or remains stuck on the spin cycle likely has a defective lid switch, door latch, drive motor, stator assembly, or drive belt. A quick fix would be to look for blockages in the agitator or manually turn the drum to force the appliance to go into a spin cycle.
If your GE stove clock is experiencing problems, reset, or is not working, reset the clock by unplugging it for ten minutes. Sometimes, solving an issue might mean having to replace the control board or fuse. Or, you may need to disconnect some wires to solve timers that won’t stop buzzing.
If you have an LG Smart TV, it is completely capable of using a Bluetooth keyboard. To connect a Bluetooth keyboard to your LG TV, you will first need to get your keyboard into pairing mode by pressing and holding the Bluetooth 1 key on the keyboard for 5 seconds. You will know that your keyboard has entered pairing mode when the blue LED light flashed repeatedly in half-second bursts.
If your GE stove door won’t close, open, or unlock, you can clean the door switch so that it latches into position or closes firmly. You can also try disconnecting the power, resetting the stove or oven, or contacting GE for assistance. The latch, door springs, or door gasket can cause problems too.
As a general rule you should always level the floor first using a levelling compound. It is much easier to apply the adhesive when the floor is already level. When the floor is uneven it’s more difficult to get the groove patterns you need in the adhesive.
Modern Dell monitors combat glare and have a more ergonomic design than others on the market. These devices can connect to your computer as an …
As a general rule you should restart both your Roku, and your wireless router. After that you should verify that your internet connection is working 100%. To do that you should contact your internet provider. If neither of these fix the issues there are a few more things to try.
As a general rule a flashing light on your Roku can be either green or white. If it’s a green light then your Roku remote is in pairing mode. And to pair it you’ll need to use the Roku app on your smartphone or use an old Roku remote to search for devices and connect them.
As a general rule, you’ll want to first restart your Samsung TV by turning it off, and unplugging it at the wall for 2 minutes. Then turn it back on again. If that doesn’t fix it then you’ll want to have a look at your speaker system to see that it’s all connected.
As a whole you’ll want to first try playing another movie or TV show. If another TV show or movie works it means that the TV show or movie you were trying to watch is broken. And you should report the problem to Netflix so they can fix it. Otherwise it’s an issue with the speaker settings.
To turn the volume up on your TCL TV without a remote and there are buttons on the bottom or back of the TV, simply press the (+) button on the remote to turn the volume up. If there are no buttons on your TV, you can install the Roku app on your smartphone by which you will be able to control the volume of your TV from. If you do not have a smartphone, a new remote will need to be purchased to turn up the volume.
If your TCL TV Hulu app is not working, the same solutions apply for many of the other applications that may experience the same problem. To fix a Hulu app that is not working on your TCL TV, you may need to delete and reinstall the app while also resetting your Roku. To do this, reference back to “TCL TV Netflix Not Working” to find the steps to reinstall the application as well as reset your Roku.
LG TV screensavers protect your screen by activating when a static image is detected. On most models, the screensaver can only be disabled in the service menu. You also cannot customise the screensaver, but can manually turn the screen off or enter Gallery mode to display images instead.
There are a number of reasons why your LG TV may have poor internet connection via Ethernet cable. One common reason is an incompatible cable, which is one that has a bandwidth greater than 100Mbps. Other possible causes include a damaged cable, modem or router, interference or outdated firmware.
If the menu keeps popping up on your LG TV, it is most likely that the settings are set to ‘Store Mode’. It may also be the TV is set to ‘Home Auto Launch’ or that ‘Simplink’ is disabled. If the menu is not working at all, it may be a software or hardware malfunction.
The HDMI audio on your LG TV may not work because of issues with the HDMI cable, the HDMI port, or your device’s sound output settings. If none of the TV channels have sound, it is likely due to the TV’s sound or volume settings, firmware bugs or connection issues with an external speaker.
HDMI connections between an LG TV and a laptop will not work for a number of reasons. It could be issues with the cable or issues with the TV or laptop. Issues with the TV or laptop include incorrect display settings or incompatible hardware or software. This can cause no or very poor signal.
To forget the WiFi network on your TCL TV, first press the ‘Home’ button on your remote control. You will then select ‘Settings’ > ‘Network’ > find and select your WiFi network with the remote > scroll down and select ‘Forget Network’ > then select ‘OK’ with the remote. Once this is done, the network should be forgotten.
If your TCL TV light is blinking and it won’t turn off, use your remote to disable the light. To do this, press ‘Home’ on your remote control, ‘Settings’ > ‘OK’ > ‘System’ > ‘OK’ > ‘Power’ > ‘OK’ > ‘Standby LED’ > ‘OK’ > then, do disable the light select ‘OFF’ > then press ‘OK’ on the remote to confirm that you want the light off. This should get the light to stop blinking by powering it off entirely.
If your TCL TV won’t stay on, this problem could be caused by an internal timer that has been set within your TV. To check to see if any timers have been set, press the ‘Home’ button located on your remote control > scroll to ‘Settings’ > select ‘System’ > ‘Time’ > ‘Sleep Timer’ > and then check to see if any timers have been set to cause your TV to turn off automatically. If so, disable those timers.
Your floor can probably support tile, but in rare cases, it depends on the type of subflooring in your home, the amount, strength, and size of your floor joists, and whether you’re tiling a first-level or upper-level floor of your home. Tile weighs about 4-6 pounds per square foot.
An HP printer that won’t unpause or keeps canceling the print job could be experiencing quite a few technical issues. Some of the most common causes of HP printer pause and cancellation malfunctions include printer settings features, outdated firmware, and antivirus software interruptions.
You can lay tile over painted concrete floors, but the adhesive isn’t always reliable. If you choose to try anyway, remove the paint, grind the concrete, or resurface the floor first to ensure that the adhesive holds. This requires sanding, power washing, paint strippers, or soda blasting.
If your ceramic floor tiles aren’t sticking, it could be due to improperly mixed grout/thinset or not using enough grout/thinset. You could also be attaching the tiles to the wrong base, letting the thinset become too dry before applying the tiles, etc. Determining the problem is key to fixing it.
There are many things you could do to spruce up a home but if you want to take things to the next level, installing a …
Installing carpeting directly over a laminate floor is an option that can easily be done. If the existing laminate floor is in good shape, you can install the carpeting and live on it for many years. When you remove the carpeting, you may even be able to salvage the laminate flooring.