If your Blink camera isn’t showing, the device connected to the camera may not be connected to Wifi, the batteries might need to be replaced on the camera itself, edit the filter options for each camera within the Blink app, and try resetting the router if you suspect the network connection is bad.

Generally, this is caused by the roller having hair or too much debris stuck in it, as well as hair wrapped around the sides, and/or on the inside of the roller. All of which needs to be removed. Otherwise, the brushroll button isn’t turned on, and needs to be pressed to turn the rollers on.

Blink camera problems can be resolved by checking the battery status within the Blink application, changing the batteries when a low battery indicator appears, replacing the batteries with AA lithium-ion batteries, and shortening the length of clips the camera records.

 If you want to know how to fix Samsung messages not sent service not activated on network, first, download Network Settings from your Network Carrier and then check it again. If the problem persists, go to Settings and then to SIM Card and then go to Select Network Manually.

If your Dell laptop docking station isn’t working, update the MAC address with the value of your ethernet MAC address when using an ethernet cable, confirm that the Windows Device Manager is recognizing the dock, and try completing an auto-reset of the docking station.

You can watch ESPN on your Vizio Smart TV, but it is a little more work than simply downloading an app. The ESPN App is not available yet through SmartCast. This means that to stream ESPN on your Vizio Smart TV, you need to use outside devices. You can use AirPlay or Google Cast if you do not want to deal with HDMI attachments. Otherwise, many devices are compatible with your Vizio Smart TV and can support the ESPN and ESPN Plus App.

While your LG TV does not have an option to play ESPN Plus on its regular streaming, you can watch ESPN Plus via other routes. You can go to the context menu and download the ESPN Plus App. Or you can use an external device or airdrop that will allow you to watch ESPN plus on your LG Smart TV. In the future, LG may make it so that the ESPN Plus service can simply be played from your LG Smart TV.

If your Dell laptop camera does not turn on, update the camera’s software driver if the camera is freezing or if the camera is not detected, ensure the camera is enabled within BIOS, and check that various privacy settings have been adjusted correctly.

If your Samsung SSD is not working, change the Boot Mode to match the partition style on the SSD, format the system through CDM if the SSD will not format, change the Boot Order if the SSD will not Boot when connected, and mount the SSD through Disk Utility.

If your Samsung SSD is not showing up, is not recognized, or is not detected, run First Aid if it will not mount on a MAC, update the BIOS, connect the SSD with a SATA-to-USB cable, update the Samsung Magician Drive, and be sure the SSD has been initialized.

The various tools that can be used to cut cement board include a circular saw, dremel, grinder, handsaw, jigsaw, knife, oscillating tool, and skill saw. Always be sure to have any of these tools equipped with the proper blade to handle this material to avoid damage to either.

The various tools that can be used to cut plywood include a circular saw, dremel, handsaw, jigsaw, router, bandsaw, hacksaw, knife, reciprocating saw, and a table saw.m An angle grinder can be used, but it is not ideal. For the best results when cutting plywood, a circular saw is ideal.

If your Dell laptop screen is not full size, adjust the graphics card setting to full screen. After installing the correction Vendor Site driver (AMD or ATI), open the Desktop and go to ‘Catalyst Control Center’ > ‘My Digital Flat Panels’ > ‘Scaling Options’. Adjust the image size to fill the screen.

If your Dell laptop screen doesn’t turn after sleep, this means there is faulty communication between the battery and the screen. Remove the battery and drain any remaining power from the laptop by pressing and holding the power button. Reconnect the battery and restart the computer.

If your Dell laptop screen is not bright enough, use the Fn key and up arrow to increase the brightness. If the issue continues, you may need to replace the LCD Inverter. Low voltage to the LCD Inverter will produce a screen that is too dark, even at full brightness.

A wide variety of tools can be used to cut concrete, but the proper tool to use should be determined by the thickness of the concrete. The various tools that can be used to cut concrete include a circular saw, grinder, saw, chainsaw, chisel, dremel, hacksaw, jigsaw, reciprocating saw, and water.

The various tools that can be used to cut stainless steel include a circular saw, dremel, jigsaw, skill saw, grinder, plasma cutter, cutting torch, and a hacksaw. The tool you use when cutting such a material should be determined based on the thickness of the steel.

If you want to know how to fix your Samsung Messages App that keeps crashing, check for any software bugs that could be affecting the Messages app. If these apps are infected with a virus, for example,  it could cause the Samsung Messages App to crash randomly.

If you want to fix the issue that is leading to receiving messages twice, first, check to see that all the software on your Samsung phone is up to date. Go to Settings and then to About Device and then to Software Update. Now, perform a backup and restore as outlined below.

When the Blink camera won’t connect to the sync module, the first thing to try is to restart the device. Hold down the button located on the sync module’s side. The light will turn red and the system will be reset. You will need to reinstall the module back on the Blink app in order to use the camera.

When the Blink camera is blinking red and green, that signals that the camera has found the local IP address but cannot connect to the internet. Try restarting the router to see if that corrects the issue. If not, then reset the camera by pressing the reset button.

If you see a “Camera Offline” message that says “Your Blink Mini is offline,” it means the Blink servers have lost contact with the camera. When the network is restored or when there is reduced traffic on the Wi-Fi network, this will usually resolve itself. 

When considering cast iron, we know that it is both tough and durable. When cutting through solid cast iron, a saw or cutting tool with a diamond saw blade would be the best choice to cut a straight line. You can also use a manual hacksaw, especially when cutting cast-iron pipes.

If your ESPN Plus keeps buffering, you can delete and then reinstall the app on your android or iOS phone. Downloading the latest version of the app on your smartphone can usually resolve any connection problems. Your internet connection may also be slow, so try switching to a Wi-Fi connection.

If you want to know how to cut sheet metal properly, follow safety measures and use a pair of snips appropriate for cutting sheet metal. Place the piece of sheet metal on a sturdy surface. Draw your cut line. Open the snips up and insert the sheet metal into the snips as deeply as possible.

If your Samsung monitor speakers are not working, run an audio test. Make sure the correct HDMI or DisplayPort cable is being used and is in the correct port. Adjust the default speaker setting. Update your PC/Computer driver to recognize the Samsung monitor.

To cut stone properly, select the appropriate saw for the job. Only use diamond blades that are the correct length. For larger jobs, keep the diamond blade wet while in use to create a smooth cut and to keep the amount of silica dust released to a minimum.

A broken latch is typically the cause of a Shark Rocket vacuum that won’t stand up. Unfortunately, this problem cannot be fixed without first calling Shark’s customer service to obtain a replacement for the latch. The latch may be under warranty, depending on when you purchased the vacuum. You can also purchase a replacement latch on the Shark’s official website or through Amazon.

The proper way to cut metal pipes is to use a heavy-duty pipe cutter, or a grinder for tight spaces. Once you have the proper tool picked out, take measurements to ensure you are cutting the proper length, and mark the pipe where you will be cutting. Put on the proper protective equipment, such as safety glasses, before using the cutting tool. Then simply follow the instructions for either the pipe cutter or grinder to successfully cut through the metal pipe. 

If you want to know how to fix a Mikita Drill battery that is stuck, try to press the battery release clip. If this does not work, you will need to apply additional force to the battery release clips. Press inward on the battery to take off any additional pressure on the battery release clips.

If you want to know how to fix your Makita Drill Red Light Blinking and/or Flashing, it is important to know that it usually indicates that the Makita Drill Battery is in a state where it is simply too heated up to receive a charge. At this point, the cooling fans will turn on.

An HDMI connection is much more efficient because it contains both the video and audio signal. If there is an issue with the HDMI signal …

There are few basic checks to do first. These are to ensure the DisplayPort cable is plugged in properly on both ends, and that the display device such as a TV, or monitor is on the DisplayPort channel. After that do the additional steps explained further below.

To connect a Samsung monitor to another device, the connection process will vary depending on the device you are connecting, but it is essential that the cords you are using are of high-quality, in good condition, and are what came with the separate item you are connecting if possible.

Access the screen options by pressing the menu button or the ‘JOG’ button, which is a small joystick type button. After pressing either of these, depending which one your monitor has options will appear on the screen. Select the option that says ‘System’ or ‘Reset’ and then select ‘Reset all’.