Electronics

The Kindle has changed how we read and it has never been so convenient before. These devices are awesome for reading your favorite books while …

To connect your Vizio soundbar to Hisense TV, you will need to connect a HDMI cable to the correct port on the Vizio soundbar. Look for the port labeled HDMI OUT (ARC) and insert the end of the HDMI cable into it. Connect the other end of the cable to the HDMI 1 port on the TV.

As a general rule, ensure your Kindle has enough charge by plugging it in. The wall outlet may not be supplying power, or the wall charger is faulty. Try charging it on a different wall outlet, and using a different charger, or USB to micro USB cable. Below are additional steps to do after that.

To connect your Vizio Soundbar to your Sharp/Panasonic TV, you will need to use an Analog/RCA cable, a SPDIF/Optical cable, an HDMI cable, or Bluetooth. Once you have connected to the Soundbar, you will be able to use the ‘Learn Remote’ feature to get audio control.

The Kindle is an amazing device that brings all your favorite books with you no matter where you go. Despite being so fantastic, this device …

Your Kindle not turning on even when plugged in might be due to a problem in the Kindle’s battery,  hardware, software, charger, a power outlet, motherboard, or unresponsive Kindle devices. Below is a detailed discussion of such causes and how to fix them.

A probable reason why your Samsung monitor is not connecting to the input device is that the signal cable is defective. Replacing the signal cable could fix the problem. But before you invest in a new cable, check if the current one is firm in the ports on both ends.

When your Sony headphones are playing at higher-than-normal volume levels, there are steps you can take to sort the issue out. You can make your headphones your default sound device or update audio drivers to get the volume levels back to how you want them.

The most common cause of a Sonos Move speaker not switching to Bluetooth is outdated firmware. Thankfully, this problem can be fixed by connecting the speaker to Wi-Fi and updating its firmware. To do this, open the Settings tab and click System > System Updated > Check for Updated.

To reset/fix Sonos Roam/Roam SL, press the power button until the LED lights go out with a sound. While pressing the play/pause button, press and release the power button. Continue pressing the play/pause button until the speakers flash an orange and white light.

A GE smart switch solid red light might imply that the switch is overloaded or that the switch needs to get more power. In addition, the solid red light may also indicate that the switch has a poor connection to the internet or a faulty power connection.

A GE smart switch with no power can be due to power outages, a tripped circuit breaker, a faulty smart switch, or an air gap switch that is not fully pressed in. Check your home’s power supply and reset the circuit breaker. Ensure the air gap switch is fully pressed, and replace the smart switch.

It happens sometimes. You charge your Kindle, looking forward to another round of uninterrupted reading, but suddenly, you can’t turn it back on. Is it …

When the GE Smart Switch won’t turn off, try pulling out the air gap and waiting 10 to 15 seconds before pushing it back in. The air gap is located at the bottom of the switch and looks like a little button. It doesn’t come out of the switch all the way.

Sony headphones that won’t turn off are typically caused by the automatic power off setting in Sony’s app being set to “Do Not Turn Off.” This setting allows the user to decide the duration for which your headphones stay on when not using before the headphones automatically turn off.

The first thing to check is that the DisplayPort version is selected in the LG monitor’s settings. This is typically found under the General Settings section in the LG monitor’s settings menu. If the settings are correct, ensure you are using the most up-to-date driver installed.

LG monitors will go into power saving mode if they cannot detect a signal from the HDMI input. If there is an issue with the HDMI port or cable, it can cause the LG monitor to seem stuck in power saving mode. When it isn’t really stuck, it just cannot detect a signal.

Asus monitors are manufactured by ASUSTek, a company based in Taiwan. The Asus monitors are very reliable and offer exceptional performance. Even so, there will be times when the Asus monitors may present issues that are easily resolved with just a few minor fixes.

If your Kindle doesn’t charge, it may be because of a bad battery, a bad charger, a bad charging cable, a bad power source, a bad charging mode, or a loose charger. To fix the problem, swap out the damaged parts, switch to a new power source and clear the dust and debris out of the charging port.

You can hard reset your Sonos play by unplugging the device and pressing and holding the join button as you reconnect your play. Continue holding until the speaker flashes orange to white. Wait for the light to turn green, indicating a successful reset.

The most common reason why the Kindle is charging but not connecting to your Mac is the USB cable and port. Switch the USB cable for a different one and see if the Kindle will connect. This is usually the problem if you’re using a different cable than what came with your Kindle.

When the Sonos Beam speaker isn’t connecting to Alexa, the issue can typically be resolved by re-enabling the Sonos skill. To do this, open the Alexa app and then click on the More Menu, which is located at the bottom right. Click on Skills & Games > Your Skills > Sonos > Disable Skill.

If your Acer monitor DisplayPort to HDMI is not working, try unplugging and disconnecting all input devices. Wait a few minutes and plug back in and make all connections. Then turn on the monitor first and then the PC and the issue should be resolved.

Anytime you are having a problem with your JBL earbud volume being too low or too loud, you should reset the earbuds. Press and hold the power button on the earbuds for up to a minute until the LED lights begin to flash. After they restart, you can try adjusting the sound again.

When your JBL earbuds are not turning on or if they stay on and won’t turn off, they may need to reset. You can press and hold the power button on the earbud. After holding it for about 20 seconds, the earbuds will reset and you can release it at that point.

Bluetooth technology is a very convenient way for us to connect devices. It allows us to connect them without the use of wires. If you …

Sharp and Panasonic TVs are very popular devices. An LG soundbar can be used to enhance your viewing pleasure by improving the sound. How can …

One of the easiest ways to connect an LG soundbar to a smart TV is using HDMI. A high-quality, new HDMI cable should be used and connected to the HDMI ARC outlet port on the TV. The other end of the cable should be firmly plugged into the back of the soundbar.

You can connect an LG soundbar to an LG TV using HDMI or Bluetooth. Plug in the HDMI cable to both the soundbar and the TV and they should recognize each other automatically. If using Bluetooth, set both devices in discoverable mode and they will connect automatically.

The easiest way to connect your LG soundbar to either an LG or Vizio TV is with an HDMI cable. The cable should be connected to the HDMI (ARC) port on the TV and the HDMI port on the soundbar. If there are multiple ports, you can choose the one that is best for you.

The easiest way to connect an LG sound bar to a TV is with an HDMI cable. Connect the HDMI cable to the HDMI (ARC) port on the television. The other end of the HDMI cable can be connected to the sound bar HDMI port. You may have to select the soundbar in your TV settings to get it to work properly.

In general, first reset your Bose earbuds by putting them into the charging case, and then holding down the Bluetooth button the charging case for 30 seconds. After that, take them out of the charging case. If they still won’t turn on and off, then do the steps below.

When your HP monitor HDMI is no longer working, the first thing to do is to restart the computer. Unplug the HDMI cable fully from both the monitor and the computer and shut the computer down fully. After waiting a few minutes, reconnect to the HDMI cable and restart the computer.

Overall, first check the equalizer settings in the Bose music app, and turn it up or down. After that reset your Bose earbuds. The other reasons are the volume limiter on your smartphone is set, your smartphone needs to be reset, or there is a hardware fault that Bose needs to repair or replace.

Overall, put them back into the charging case for 30 seconds and take them out again. Wait for about 10 seconds for them to sync to each other. If they won’t pair to a device over Bluetooth, restart the device you’re connecting them to, and remove and re-add them as a trusted Bluetooth device.