Reboot your remote, the universal remote hub (if your remote uses one), and the device you’re trying to operate. This is done by removing the batteries from the universal remote and putting them back in, and unplugging the hub and other device(s), and plugging them back in.

A Cox remote not working is caused for the following reasons, the batteries are drained or aren’t installed the right way around, the Cox remote is not paired to the TV, Cox set top box. Or, you don’t have line of sight from the front of the remote to the infrared sensor on the front of the devices.

If the Vizio TV closed caption menu is not available/grayed out, use the remote to access the closed caption setting within the TV. Using the remote, press the ‘CC’ button to enable closed captioning. If the remote does not have a ‘CC’ button, press the ‘Menu’ button to navigate to your TV’s settings.

First take the batteries in out to reset the remote and see if that’s resolved the issue. If not perform the following, replace the batteries with a new pair, unplug your Xfinity device and plug it back in to reset it, factory reset your Xfinity remote and re-pair it to your TV and Xfinity device.

If your Vizio TV starts in zoom mode, make sure the closed captioning feature is turned off. Press the dash button (-) on the remote to change the zoom ratio. Make sure other devices connected to the Vizio TV are programmed with the same ratio setting.

If your MacBook HDMI is not working, try resetting the System Management Controller, select the TV you are connecting to within the Output tab under Sound preferences, confirm that your MacBook is updated with the most recent software, and adjust the display manually by pressing ‘Option – F1.’

If your Vizio TV is displaying a black and white screen, make sure the audio and video connections are in the correct ports. Make sure the colored jacks are in the correct color ports. If the TV has recently been moved, make sure the cables are tightly connected.

You can apply epoxy over both a tile floor or countertop. It provides a usable, beautiful, and livable surface for the entire home. As long as you prepare things properly ahead of time, the epoxy job will go smoothly and after it cures, it will be ready to use for many years to come.

If the Sonos remote is not working after updates, reinstall the updates again. Any glitches within the network signal or the updates can cause the remote to not work. Go to the Sonos app Settings and choose Online Updates. The app will automatically install any updates.

You can install a laminate floor on the ceiling and create a beautiful look for the room. It’s a great way to add a cottage or country look on a budget. As long as the floor is attached solidly to the ceiling, it can provide a long-lasting, beautiful DIY addition to the home.

If the DIRECTV remote is not responding, make sure the batteries are working. Replace the batteries with fresh alkaline batteries. Gently clean the battery terminals with a Q-tip and rubbing alcohol, removing any dirt that could affect the connection.

For the most part, installing vinyl flooring over radiant heat is a great idea. As long as you choose quality vinyl floor and hydronic radiant heat, you can continue with the project. Always keep the temperature at a maximum of 85° to avoid damaging the floor or causing excessive off-gassing.

The RCA TV remote sensor will not work if the signal is being obstructed. Make sure there are no other electronic devices nearby that can interfere with the signal. Remove any objects between the remote and TV that could block the sensor from sending a signal.

Concrete makes an excellent subfloor for vinyl plank flooring. Preparing the concrete is the key to a successful job. This would include ensuring that the floor is sufficiently dry before the vinyl tile is put down. Generally speaking, two or three months of dry time is sufficient for the concrete subfloor.

If your Nest Thermostat is having cooling problems and you are in need of a few troubleshooting methods, try resetting the Y1 wire within the Nest for any issues with the device not displaying ‘Cool Mode,’ and reset your external and internal breakers in the case of a power outage.

Generally speaking, the only preparation you will need to do with the concrete is to clean it and make sure it is flat and level. Grinding down high spots or filling in low spots is an important part of preparing the subfloor. You might also find it beneficial to float the floor with a self-leveling compound.

If your AirPods Mic is not working, confirm that you have your AirPods connected to a device, try turning off the device the AirPods are connected to then turn it back on, and install any available software updates to alleviate any problems with the mic working inconsistently.

If your Panasonic Remote is not working and is not pairing with your Panasonic TV, press down on the Action and Power Keys at the same time for at least 5 seconds. You should then see all of the buttons for all the components start to blink. Then press the TV button.

If your ATT TV Remote is not Working and won’t update, reset it to factory settings. Press and hold down the Dash and Apps buttons together. Watch for the LED lights to blink blue 2 times. Then press the Red Button on the side of your ATT TV Remote and check it for normal functioning.

If the Now TV Remote is not working and is not changing volume, this could be a problem with the Mute function being enabled.  Press the Sound Level Buttons Key on the Now TV Remote. Then press on the Mute and Unmute Buttons to make sure the Mute function is not enabled. 

If your Android TV Remote is not working and neither is the Remote Keyboard, hold down the Shift button on the Android TV Remote. Press Character to select the type of character desired. Then select lowercase letters abc or Upper Case Letters ABC. Now press Home Network to select the character for Space.

If your Wii Remote is not syncing and keeps calibrating, place it on a flat surface with the buttons facing downward for ten seconds. Be sure that the Wii Remote is placed parallel to your TV screen. After the ten-second period, go ahead and point the Wii Remote back at the TV screen.

Typically, it is possible to pour concrete over plywood and have a nice, finished product. As long as you keep the weight of the concrete in mind and ensure that you carefully prepare the plywood, a concrete floor will last for many years after being poured.

Many families are enjoying living on peel and stick tile that they put on a linoleum floor. It’s a quick and easy way to upgrade your home and add beauty to the floor. Very little is needed in the way of preparation and you can typically get a room done in under a day.

Installing peel and stick tile over a laminate floor is a quick and easy way to change the look of a room. Prepare the laminate floor by sweeping and washing it and then measure the center of the room. Lay the tiles in quadrants, putting some pressure on them to fix them in place.

Preparing the linoleum is the most important part of painting it. Without proper preparation, the pain will not likely last more than a few months before it starts to peel. In order to get the floor ready, you must clean it thoroughly and rough up the surface with sandpaper. You can then prime the floor with Kilz or a similar primer.

Many people have successfully installed concrete over a hardwood floor. It is a beautiful addition to the home that can last for many years. As long as you prepare the subfloor properly and ensure that it is free of defects, you can go ahead and pour the concrete.

Do not neglect to prepare the laminate floor before you begin painting it. If you skip this part of the process, the paint is not going to last very long and may even begin peeling within a matter of days or weeks. With the proper preparation, the paint will last on a laminate floor for many years.

The wall outlet, power cord, or an internal component in the printer are causing the issue. Test the wall outlet using another device to ensure it has power. If it’s not that, unplug the power cord at both ends, and in the middle and reconnect it making sure everything is fully plugged in.

Restart both your TV and DirecTV device by unplugging or turning them off at the wall outlet and wait for 1 minute before plugging them back in or turning them back on at the wall outlet. If that doesn’t fix the sound not working, next turn off Dolby digital audio in the settings, explained below.

A good first step to take is to check that you have all the channels available. Click Menu on your remote and scroll through until you find the TV Guide Main Menu. Find the area marked Setup and select that. Once in here, you need to look for the section marked No Auto-Tune.

If your cable remote will not turn on/off your TV you may need to reset your devices. If you’ve changed the batteries in your remote, hold the power button to see if it will turn on your TV. If it does not, move on to resetting both your cable receiver and TV.

If your Samsung tablet is not working, check for any recent software updates and allow the update to download and install, clear the cache of the email app you are using on the tablet, and try removing any SD cards and reinserting them before testing their function on another device.

If your Wii remote is not working and is not showing the cursor, check to make sure that the pointer lens is not obstructed. Check the battery strength and then make sure that Wii remote is in sync. Check the sensor bar to make sure the sensor bar wire is not frayed.

If your Samsung Chromebook isn’t working, download the ‘Microphone Test’ app to test for existing issues and find the proper solutions to resolve that particular problem or complete a factory reset through powerwash to resolve any advanced connection issues.