If your HP Printer isn’t working, be sure the paper is properly engaged with the roller, confirm that the scanner has been enabled, update the firmware on the printer, reestablish communication between your printer and PC, and try completing a hard reset on the device.
First, try a Hard Reset in case the TV processor has simply just frozen up. If this does not work, check for common indications that the TV’s mainboard is faulty or malfunctioning. This would include common problems such as no picture on the screen or no sound emanating from the speakers.
Unplug the USB cable from the HP Envy printer. Then go to Control Panel Programs and Features. Select all the HP Envy Printer entries and uninstall them. Go to Devices and Printer. Install the latest HP Printer Drivers and under Printer Assistance select Scan to Computer.
If your Dell monitor is displaying flickering pixels, there could be an internal hardware issue. Try connecting the monitor to another computer to see if the problem goes away or remains. If the issue persists, call Dell Technical Support to see if a replacement or repair is needed.
When your Dell laptop will not start, try shutting it down and removing all cables. Unplug the power cord and remove the battery. Hold in the power button for 30 seconds to drain any residual power. Reconnect all cords and put the battery back in. Restart the computer and it should start up without any problem.
If the HDMI port on your Dell laptop is not working, it is often due to hardware failure. Visually inspect the HDMI cable and if it is older, you may need to update it. Inspect the HDMI port on the laptop for any damage as well. If the HDMI cable is loose and easily pulls out of the port, try another HDMI cable.
When your Dell laptop Bluetooth is not working, go into the settings menu and choose Bluetooth and other devices. Turn off Bluetooth fully, wait 30 seconds and turn it back on. You may also need to remove Bluetooth devices from the list of known devices and add them again.
When a refrigerator is not working or cooling, it can often be traced to dirty and clogged coils. In units without coils, a similar problem can happen if the condenser fan is stuck. Check and clean the coils and, if necessary, the condenser fan. Make sure that everything is running properly after doing so.
Generally speaking, a problem with a KitchenAid food processor not working is associated with it not being assembled properly. As a safety measure, the food processor must be assembled the right way. It may also be due to overheating, a lack of power, or the lid not locking in place.
There are two distinct ways that a Dell Laptop can restart itself and each requires different steps to fix it. The first is called a ‘boot loop’ error, where it will continue to restart before it gets to the login screen. The other is where it occurs mostly once you’re already logged into Windows.
If AirPlay is not working on your LG TV, reset the device you are trying to connect your TV with, be sure that your TV is capable of supporting AirPlay, and check that all devices have not been muted and that the volume is turned up to an audible level.
If your Sony soundbar is not working, complete a hard reset with the device, turn off the ‘Auto Standby Function,’ adjust the Digital Audio Out Volume function on your TV, and change the audio output setting to ‘PCM’ while also switching the soundbar to ‘Music’ mode and turn ‘Verticals’ ‘Off.’
If your Dell laptop sound or audio is not working, restart the device to see if any minor causes to the problem are resolved, complete a sound test to confirm that the audio is working, and be sure that all audio ports are free of any debris build-up that might prevent audio from working.
If YouTube isn’t working on your iPad, reset your network, disconnect any other devices connected to the network that are not in use, check to see that your network speed can support the type of videos you are playing, and select the option to go into “Desktop Mode.”
In general, run Diagnostics by entering the BIOS after restarting your Dell Laptop. To do that press F12 repeatedly when the Dell Logo appears. One of the options is ‘Diagnostics’ , select that by using the up and down arrows on the keyboard and pressing the ‘enter’ key.
If AirPlay isn’t working, look for and install any available updates for either device you are using, confirm all passwords and login information is correct when connecting to a network, enable AirPlay if it has been turned off, and be sure that all devices are updated with the most recent software.
You purchased your Polk Soundbar to give you that ‘theater-vibe” at home, not “sitting in your car” vibe. The Polk Soundbar is designed to elevate …
There will be issues with sound from the ESPN app if the volume on the streaming device is too low or is muted. Make sure the device is not set to silent or on airplane mode. An iPhone or iPad will have an orange light by the volume button if silenced.
As a general rule, if your DISH TV does not connect to the internet, check the cables on both your TV and receiver. The cable that affects the internet connection is the LNB cable. Make sure that it is connected at both ends. It should connect to your DISH receiver through the ‘sat in’ port.
Before you call anyone, check to ensure that the temperature of the freezer is set correctly. Then try testing the door’s gasket. Close the door on a dollar bill then try to pull it out. If it comes out easily, the gasket is failing. Check other areas of the door the same way to ensure that you are getting a good seal.
If your Frigidaire Washer is not draining it could be a problem with the drain pump not working properly. The drain pump can be found at the bottom of the washer. If you pull the washer forward you can easily remove the drain pump. If there are not any obstructions in the drain pump, and it is still making strange noises as it drains it is probably time to replace it.
If your Wii Remote won’t turn on/charge or won’t hold a charge, check the battery by pressing the Sync button. If you see 4 flashing lights, your battery is fully charged. One flashing light indicates the lowest level of charge and you may have to replace either the batteries or the Wii Remote.
If your Kenmore stove digital display is not working, be sure to check that the oven control is not in a lock out mode. If this is the issue, try pushing and then holding the stop/clear button for about 3 or 4 seconds. Otherwise, you have a faulty electronic control board that needs to be replaced.
If your Bosch dishwasher isn’t opening properly, be sure there is no damage to the door lock, confirm that nothing is obstructing the soap dispenser once the cycle has started, check to see if the flood switch is tripped, and see if the spring tension is wound too tight on the door.
An error beep is a signal that alerts you to a problem with the washing machine. If it is beeping continually, you may need to replace the control board. If the machine is working otherwise, you can always turn off the beeping noise by holding down two buttons simultaneously. Check the manual for the specific buttons.
A defective or clogged valve is a likely problem if a dishwasher is not cleaning the dishes on the top rack. If the valve is clogged, it can be cleaned but if it is faulty, it must be replaced. Cleaning the inlet valve may damage it so it may need to be replaced in either case.
You can lock the door with the control panel and it may have happened inadvertently. Hold down the two buttons that are marked with the lock icon for five seconds and it should release the door. Otherwise, check the screw that is holding the dishwasher in place under the counter countertop to make sure it is not blocking the door.
The heating element in your dishwasher has likely failed. After turning the power off to the dishwasher, remove the heating element and inspect it carefully. If there are any burnt areas or if it is cracked, it should be replaced. You can use a multi-meter to test continuity.
If the touchpad and control panel are not operating properly, it may cause some of the buttons to be unresponsive. You might have to replace the control panel, which is likely attached to the touchpad. Cleaning the touchpad may sometimes work as well.
A faulty door switch will cause the microwave to turn off and back on. The door switch signals that the door is either open or closed. If it is closed, the microwave will run. If it is open, it will shut off automatically. If the door switch is faulty, it may turn off multiple times.
Power loss is the most common reason why a JBL Soundbar is not working. Inspect the power cord, check for a tripped breaker and try plugging the Soundbar directly into a receptacle. You can also try using it on another TV to see if it fixes the problem.
Most often it’s caused by the two filters at the base of the dishwasher being clogged with food debris, and cleaning them will solve this issue. If it’s not this, then the hose that goes from the drain pump to the garbage disposer or sink can have a blockage.
The causes are that Rinse-aid needs to cause more water to slide off the dishes, or the water temperature is too low. Also, improperly stacking the dishes, or one of the following components can be faulty: the heating element, internal component, fan gasket, and/or the fan.
If Hulu Live isn’t working, complete a power cycle on the device you are accessing Hulu Live through, reset the device, clear the cache within Hulu, update your device with the latest software, uninstall and reinstall the device, and disconnect any other devices connected to the same network.
If your Bosch dishwasher is not draining, check the drain pump for any blockage and confirm that there is no damage to the drain pump cover, that it is not loose, or that it is not missing. Alsp, confirm that the float switch is not faulty and check for continuity at the inlet valve.