Clear the cache and data in the phone app and call settings app, close all apps in the background, and do a soft reset of your Samsung phone. The contacts might not be synced if you changed the email address, or the email address isn’t set up because of a factory reset.
There are a range of steps that you need to do on your computer beforehand. When they haven’t been done it will cause the Samsung data migration tool to not complete the data migration. Such as, turning off background programs, fixing any disk errors, and doing a disk defrag.
For troubleshooting methods to change the resolution on your Vizio TV, try resetting your TV to stop any unwanted resolution changes ongoing content, turn off the ‘Zoom Mode’ within the ‘System Options” menu, and be sure you are changing the aspect ratio for any ‘Wide Mode’ needs.
For questions concerning a factory reset on a Vizio TV, the factory reset code is ‘0000’ if not previously changed to a specific code, try resetting your device if you encounter issues with the TV locking up while in the middle of a reset, and disconnect your device from power to complete a reset.
If your Vizio TV has dark spots, it could be that an LED strip has gone out, that a display panel has been damaged, causing it to have difficulty retaining pixels, or it might be a problem that can be resolved by resetting the TV if dark spots randomly come and go.
If your Vizio TV menu keeps popping up, the most common cause is that either the menu button is stuck or another button on your remote is stuck. To see if this is the problem, remove the batteries from the remote and rapidly click the menu button as well as all other buttons on the remote.
If your Vizio TV has no signal when on the RGB input, this is because this input option is only to be used to connect through video signal with a computer. Therefore, if no computer is connected and you are trying to complete a different function on the input, no signal will be present.
Oftentimes, auto-rotate can simply experience glitches or ‘freeze’ if there is an open app that you used auto-rotate on, but is currently in the background. While it may not seem like it would affect your phone, it’s good practice to restart it at least once or twice a week. This can prevent issues like auto-rotate not working.
If your Samsung Soundbar Remote is not working and the Remote won’t ID set, turn the soundbar off. Then press on the Volume or Up button on the soundbar’s remote. Hold this button down for about six seconds until you see the message of ID Set on your Samsung Soundbar Remote.
If your Samsung Smart Switch is having connection problems, and your USB connection is unsupported, see that your USB is completely plugged into the USB port. Try different USB ports or USB cables. You will see a notification indicating Allow MTP Connection which you will need to confirm as enabled.
When you have a Samsung Galaxy touch screen not working, the problem may be an easy fix. Your touch screen may be blurry, frozen, operating …
If your Samsung Smart Switch is not transferring videos, go to Gallery and delete any videos that are not absolutely important to you. You can also go to Settings and then Apps and delete any video apps that are taking up a lot of space. You can also delete the video cache data.
If your Vizio TV is having issues with screen mirroring, make sure you are using a Chromecast-compatible app and device. Ensure that the devices are on the same network. Disable power saving options on the streaming device. Try restarting the TV, streaming device, and router.
It could be something on your phone that is causing the battery drain or a battery not holding a charge. Google is a common culprit for this. Try uninstalling your Google suite or anything that uses Google. Reset your phone and this may take it to its default positions. Try charging your phone again to see if it keeps happening.
If your Sanyo TV Remote is not working and its red light is blinking, check your Bluetooth connection and pairing. Make sure that the Sanyo TV Remote is in full synchronization with your Sanyo TV. Also, make sure all batteries in the Sanyo TV Remote are fully charged.
Take the batteries out, and put them back in. Then restart your Google Chromecast, and your TV by turning them at the wall outlet then turning them back on again. After that, verify the remote is set up correctly in the ‘remote and accessories’ option in the settings of Google TV.
If your Westinghouse TV Remote is not working and neither is the Westinghouse Remote’s Sensor, turn off your Westinghouse TV’s power for about thirty seconds. Then hold the Westinghouse TV Remote’s Power Button for thirty seconds and then release it. Now reconnect the Westinghouse TV’s power source and see if the Westinghouse TV Remote is working again.
Reboot your remote, the universal remote hub (if your remote uses one), and the device you’re trying to operate. This is done by removing the batteries from the universal remote and putting them back in, and unplugging the hub and other device(s), and plugging them back in.
A Cox remote not working is caused for the following reasons, the batteries are drained or aren’t installed the right way around, the Cox remote is not paired to the TV, Cox set top box. Or, you don’t have line of sight from the front of the remote to the infrared sensor on the front of the devices.
If the Vizio TV closed caption menu is not available/grayed out, use the remote to access the closed caption setting within the TV. Using the remote, press the ‘CC’ button to enable closed captioning. If the remote does not have a ‘CC’ button, press the ‘Menu’ button to navigate to your TV’s settings.
First take the batteries in out to reset the remote and see if that’s resolved the issue. If not perform the following, replace the batteries with a new pair, unplug your Xfinity device and plug it back in to reset it, factory reset your Xfinity remote and re-pair it to your TV and Xfinity device.
If your Vizio TV starts in zoom mode, make sure the closed captioning feature is turned off. Press the dash button (-) on the remote to change the zoom ratio. Make sure other devices connected to the Vizio TV are programmed with the same ratio setting.
If your MacBook HDMI is not working, try resetting the System Management Controller, select the TV you are connecting to within the Output tab under Sound preferences, confirm that your MacBook is updated with the most recent software, and adjust the display manually by pressing ‘Option – F1.’
If your Vizio TV is displaying a black and white screen, make sure the audio and video connections are in the correct ports. Make sure the colored jacks are in the correct color ports. If the TV has recently been moved, make sure the cables are tightly connected.
If the Sonos remote is not working after updates, reinstall the updates again. Any glitches within the network signal or the updates can cause the remote to not work. Go to the Sonos app Settings and choose Online Updates. The app will automatically install any updates.
If the DIRECTV remote is not responding, make sure the batteries are working. Replace the batteries with fresh alkaline batteries. Gently clean the battery terminals with a Q-tip and rubbing alcohol, removing any dirt that could affect the connection.
The RCA TV remote sensor will not work if the signal is being obstructed. Make sure there are no other electronic devices nearby that can interfere with the signal. Remove any objects between the remote and TV that could block the sensor from sending a signal.
If your Nest Thermostat is having cooling problems and you are in need of a few troubleshooting methods, try resetting the Y1 wire within the Nest for any issues with the device not displaying ‘Cool Mode,’ and reset your external and internal breakers in the case of a power outage.
If your AirPods Mic is not working, confirm that you have your AirPods connected to a device, try turning off the device the AirPods are connected to then turn it back on, and install any available software updates to alleviate any problems with the mic working inconsistently.
If your Panasonic Remote is not working and is not pairing with your Panasonic TV, press down on the Action and Power Keys at the same time for at least 5 seconds. You should then see all of the buttons for all the components start to blink. Then press the TV button.
If your ATT TV Remote is not Working and won’t update, reset it to factory settings. Press and hold down the Dash and Apps buttons together. Watch for the LED lights to blink blue 2 times. Then press the Red Button on the side of your ATT TV Remote and check it for normal functioning.
If the Now TV Remote is not working and is not changing volume, this could be a problem with the Mute function being enabled. Press the Sound Level Buttons Key on the Now TV Remote. Then press on the Mute and Unmute Buttons to make sure the Mute function is not enabled.
If your Android TV Remote is not working and neither is the Remote Keyboard, hold down the Shift button on the Android TV Remote. Press Character to select the type of character desired. Then select lowercase letters abc or Upper Case Letters ABC. Now press Home Network to select the character for Space.
If your Wii Remote is not syncing and keeps calibrating, place it on a flat surface with the buttons facing downward for ten seconds. Be sure that the Wii Remote is placed parallel to your TV screen. After the ten-second period, go ahead and point the Wii Remote back at the TV screen.
The wall outlet, power cord, or an internal component in the printer are causing the issue. Test the wall outlet using another device to ensure it has power. If it’s not that, unplug the power cord at both ends, and in the middle and reconnect it making sure everything is fully plugged in.