If your Samsung phone speaker is not working and is making odd noises, first, unplug any device that is plugged into the headphones jack. Then, Restart the phone and hold the Power button down until you see a Power Menu that becomes visible. Now, test the speaker.
If the LG backup app keeps crashing, make sure the Wi-Fi connection is strong enough and stable enough to support. If the connection drops during the backup process, the app will continue to crash. Reduce the number of connections on the network. Restart the router to increase signal strength.
If your Samsung phone beeps for no reason, there could be an app running in the background that is experiencing a software glitch. You will need to go through your downloaded apps and, one by one, turn off notifications to see which one is the culprit.
You can decide to do a factory reset to your Toshiba television if you want to erase all the data you have on there, including your Wifi settings, and start anew. You do this by going to the Home screen, navigating to Settings, Device, and Software, and then restoring to factory default.
You can reset the Insignia TV by unplugging the TV from its power source for 60 seconds. This will refresh the memory cache and allow you to create new settings and preferences. Performing a factory reset will delete previously saved settings, returning the TV to its original default settings.
It is easy to learn how to reset Philips TV, with a forced restart or resetting to factory default settings the common workaround to black screens and issues with crashed apps. After you reset your Philips TV, reinstalling your Philips TV channels is a few clicks away.
If your Samsung Phone won’t connect to devices and won’t connect to your watch, hold down the Power Key on your phone and then tap Power Off twice. Then press the Power Key gain to turn the phone back on. Do the same steps on the watch and also turn off the Power Saving Mode of the watch.
When it comes to your MacBook not detecting additional monitors or external hardware, first check that you have properly detected all external devices in the System Settings folder. If that does not work, make sure that the cables are in working condition, you have run all required updates, and you have the correct adaptor.
If the Do Not Disturb feature isn’t working on your Samsung device, be sure that you have all contact favorites deselected so that no calls will come through, go through the ‘Exceptions’ section to allow for particular apps to be able to notify, and turn your phone off and back on.
If your Chamberlain Garage Door Opener isn’t working, check that power is present at the outlet your wall opener is plugged into, see that the trolly hasn’t gotten hung up on a screw, replace the lightbulb within the light, and test the light socket and logic board to see if they need replacing.
If your LG screen share isn’t working, try resetting your network and be sure to disconnect any devices that are connected to the network but are not being used when screen sharing. You can also connect directly from other devices by clicking the screen sharing icon or notification icon.
To reset a smart TV, turn off the TV and either disconnect the device directly from its power source or unplug the power cable from the device itself. You will then hold down the power button on the TV for 3-5 seconds, release the button once the time has passed, the power on the device.
If you need to reset your Sharp TV and reset because of a black screen with no picture, turn off your TV using the Power button on the TV Remote. Then, wait for one half minute to one minute and turn the TV on again and check to see if any picture is appearing.
If your Samsung Phone won’t connect to your computer, monitor or printer, and won’t connect to your printer, make sure that your Wi-Fi connection is turned on. Open Settings and then tap on Connections and then on Wi-Fi. Turn on Wi-Fi and then check your phone’s connection to your printer.
Your first step should always be to check the power cords. Make sure that your MacBook has been properly plugged in. If it everything is connected correctly, you should then look at running a hard restart. This can solve issues that may have arisen from an update or software glitch.
If your Xbox remote keeps blinking, as a general rule, you should first replace the batteries in case they are low. Then reconnect your remote. Press the connect button on the front of your Xbox. Then press and hold the connect button on your remote until the Xbox symbol stops flashing.
If your Dell Printer is not working and keeps cancelling jobs, try connecting the Dell printer to the computer via a USB. Then change the port from USB to TCP/IP (wireless) on the Dell Printer Driver and then reconnect back to Wi-Fi and try to complete your printing jobs again.
If your Epson Printer is not working and won’t stay connected to Wi-Fi, begin by restarting your Epson printer. Push the Windows Button + I button and Launch Windows Settings. Go to Devices and then double click on it. Click on Printers and Scanners.
If your LG won’t go past the LG screen, you might be experiencing a system glitch. Some of the methods to fix the issue involve erasing all of your data. Therefore, you should always try the easy methods first. Next, you can try the factory reset if you don’t get positive results.
The data and cache for the Samsung Pass app can be corrupted, so deleting it can fix this issue. Then do a soft restart of your Samsung device, make sure the Samsung Pass app permissions are enabled, and finally that you have a data or Wi-Fi connection and that it’s working.
If your Blink Camera is not recording sometimes, adjust the delay in the Retrigger Time. This is the time between the cameras detecting motion and recording. If the retrigger time is too long, any motion in the time frame will not be detected and will not be recorded.
You can change Wi-Fi on your Blink Camera by doing a factory reset. This will delete any saved information and preferences. Press and hold the rest button until the red light turns blue. The camera has now been returned to its original factory settings.
If your Blink Camera is not updating, make sure you have enough signal strength to allow for updates. You can also manually update firmware by going to the Blink Camera settings and selecting General > Software Update > Automatic Updates. Follow the onscreen instructions.
If your Canon Printer is not working and won’t stay connected, press the Setup button on the printer. Locate Device Setting and press Ok. Press on the Arrow Buttons and then when you see LAN Settings press OK. Then scroll to Other Settings and press Ok.
If your Brother Printer is not working and is not finding a network, download the Brother Network Repair Utility from support. Brother.com. Save this in a folder on your hard drive. Click on the Nettool folder and then click on BrotherNetTool.exe and follow the instructions on the screen.
As a general rule, your Samsung GPS not working in airplane mode is usually related to phone software or app software issues. Placing a phone in airplane mode does not affect its ability to receive GPS signals. Updating your software and restarting your phone should resolve the issue.
If your LG phone Wifi isn’t working, make sure that you have Wifi enabled on your device, forget the network you are currently connected to then reconnect back to it, reset the Network settings within your phone, reset the router, and switch off the Auto Connect feature.
If your phone keeps freezing, restarting, or turning off, be sure the device is fully charged, that no third-party apps are present on the phone, free up memory space if too much is stored on the device, and complete a soft reset or remove the battery to stop these issues.
If your LG phone won’t ring or vibrate, make sure that you have the volume turned up to an audible level, that you have the mute button disabled, that ‘Do Not Disturb’ has been turned on, complete a factory reset, or move to another location to improve cellular service.
If your LG phone won’t send or receive messages, be sure to delete any stored messages on your phone, as they take up storage which may be the cause of messages not being received, turn the phone off and back on to reset it, and connect to a stable and reliable network.
If your LG Subwoofer is not working and is not pairing, go ahead again and check on the back of the subwoofer for the Pairing Button. Press and hold it for at least five seconds. Then you will see the subwoofer’s LED light blinking green and red in succession.
The answer is yes. Read receipts are easy to enable or disable at anytime. You simply enter your message setting menu and find the section marked ‘More Settings’. Once you are on that menu, you can turn on and off both your text messages as well as multimedia message read receipts. It is as simple as toggling the button next to ‘Text Messaging’ and ‘Multimedia Messaging’ to the right where it will turn blue to show it is enabled, or to the left where it will show as gray to let you know that it is disabled.
Here are steps to take if your Samsung subwoofer keeps cutting out. First, check to make sure that all of the connections to the soundbar and the subwoofers are correct and functioning. You also want to be sure that you are trying to get sound from something compatible with both. There could also be an issue with the subwoofer. You can verify this by running a soundcheck.
If Samsung Pay isn’t working, be sure you are in a location that supports this feature, confirm that your device is connected to a reliable network, uninstall and reinstall the app, turn the device off and back on, disable the pop-up feature, or reset the app.
If your LG phone isn’t working, check to see if there are any available software updates, clear the data and cache of the camera, enable Bluetooth on your phone and make your device discoverable by selecting your LG phone, and run your phone in Safe Mode to see if third-party apps are the problem.